Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=5412): Process ended prematurely: osmo-stp_10.42.42.5(pid=5412) [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5412)]
Standard Output
---------------------------------------------- trial-2359 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 12:28:07.991946 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.003058 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 12:28:08.138170 tst cs_paging_gprs_active.py: using LAC 21462 12:28:08.258523 tst cs_paging_gprs_active.py: using RAC 42 12:28:08.381131 tst cs_paging_gprs_active.py: using CellId 21462 12:28:08.500779 tst cs_paging_gprs_active.py: using BVCI 21463 12:28:08.524436 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.535284 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.545948 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.556658 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.567335 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.577964 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.589035 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.599876 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 12:28:08.610948 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:28:08.732855 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 12:28:09.036631 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:28:09.175281 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:28:09.519911 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5402): Launched 12:28:09.807114 run iperf3-srv_10.42.42.10(pid=5403): Launched 12:28:10.011397 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:28:10.150608 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:28:10.495481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5404): Launched 12:28:10.781458 run iperf3-srv_10.42.42.10(pid=5405): Launched 12:28:10.983973 tst cs_paging_gprs_active.py:38: start network... 12:28:11.122285 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:28:11.644691 run create_hlr_db(pid=5406): Launched 12:28:11.835253 bus /sierra_2: Setting Powered False 12:28:12.856286 run create_hlr_db(pid=5406): Terminated: ok {rc=0} 12:28:13.273988 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5408): Launched 12:28:13.589913 run osmo-hlr_10.42.42.2(pid=5409): Launched 12:28:13.711796 run osmo-stp_10.42.42.5: Starting osmo-stp 12:28:14.256478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5411): Launched 12:28:14.569107 run osmo-stp_10.42.42.5(pid=5412): Launched 12:28:14.680083 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:28:15.220406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5414): Launched 12:28:15.329829 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:28:15.603166 run patchelf(pid=5415): Launched 12:28:15.784122 run osmo-stp_10.42.42.5(pid=5412): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5412)] 12:28:15.954736 run osmo-stp_10.42.42.5(pid=5412): stdout: | (launched: 2022-12-09_12:28:14.413483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:28:16.103055 run osmo-stp_10.42.42.5(pid=5412): stderr: | �[0;m�[38;5;43m20221209122814582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122814583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122814583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122814583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:28:16.246419 run osmo-stp_10.42.42.5(pid=5412): stdout: | (launched: 2022-12-09_12:28:14.413483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:28:16.390104 run osmo-stp_10.42.42.5(pid=5412): stderr: | �[0;m�[38;5;43m20221209122814582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122814583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122814583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122814583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122814584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:28:16.557102 run patchelf(pid=5415): Terminating (SIGINT) 12:28:16.752636 run patchelf(pid=5415): Terminated: ok {rc=0} 12:28:16.789324 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5412): Process ended prematurely: osmo-stp_10.42.42.5(pid=5412) [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5412)] [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 12:28:16.800588 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:28:16.870836 run osmo-hlr_10.42.42.2(pid=5409): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5409)] 12:28:16.925968 run osmo-hlr_10.42.42.2(pid=5409): stdout: | (launched: 2022-12-09_12:28:13.433429) 12:28:16.982455 run osmo-hlr_10.42.42.2(pid=5409): stderr: | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209122813608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209122813623 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209122813632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209122813633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209122813633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:28:17.030059 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5402): Terminating (SIGTERM) 12:28:17.074656 run iperf3-srv_10.42.42.10(pid=5403): Terminating (SIGTERM) 12:28:17.120000 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5404): Terminating (SIGTERM) 12:28:17.162730 run iperf3-srv_10.42.42.10(pid=5405): Terminating (SIGTERM) 12:28:17.204909 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5408): Terminating (SIGTERM) 12:28:17.248187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5411): Terminating (SIGTERM) 12:28:17.290768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5414): Terminating (SIGTERM) 12:28:17.300733 --- ParallelTerminationStrategy: PID 5402 died... 12:28:17.357643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5402): Terminated: ok {rc=0} 12:28:17.368306 --- ParallelTerminationStrategy: PID 5403 died... 12:28:17.424856 run iperf3-srv_10.42.42.10(pid=5403): Terminated {rc=256} 12:28:17.435140 --- ParallelTerminationStrategy: PID 5404 died... 12:28:17.492265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5404): Terminated: ok {rc=0} 12:28:17.502598 --- ParallelTerminationStrategy: PID 5405 died... 12:28:17.559353 run iperf3-srv_10.42.42.10(pid=5405): Terminated {rc=256} 12:28:17.569706 --- ParallelTerminationStrategy: PID 5408 died... 12:28:17.626304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5408): Terminated: ok {rc=0} 12:28:17.636602 --- ParallelTerminationStrategy: PID 5411 died... 12:28:17.693211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5411): Terminated: ok {rc=0} 12:28:17.703510 --- ParallelTerminationStrategy: PID 5414 died... 12:28:17.760850 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5414): Terminated: ok {rc=0} 12:28:17.849373 bus /gobi_0: Setting Powered False 12:28:18.954865 bus /gobi_0: Setting Powered False 12:28:20.065306 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5412): Process ended prematurely: osmo-stp_10.42.42.5(pid=5412) [trial-2359↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5412)]