Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32317): Process ended prematurely: osmo-stp_10.42.42.5(pid=32317) [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32317)]
Standard Output
---------------------------------------------- trial-2359 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:32:38.202266 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.212892 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:32:38.339496 tst cs_paging_gprs_active.py: using LAC 21170 11:32:38.463674 tst cs_paging_gprs_active.py: using RAC 5 11:32:38.587766 tst cs_paging_gprs_active.py: using CellId 21170 11:32:38.711967 tst cs_paging_gprs_active.py: using BVCI 21171 11:32:38.735580 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.746433 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.756925 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.768000 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.779003 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.790043 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.801290 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.812244 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:38.823579 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:32:38.946745 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:32:39.247735 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:32:39.386195 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:32:39.726525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Launched 11:32:40.011833 run iperf3-srv_10.42.42.10(pid=32308): Launched 11:32:40.213838 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:32:40.351010 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:32:40.691714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32309): Launched 11:32:40.976021 run iperf3-srv_10.42.42.10(pid=32310): Launched 11:32:41.177858 tst cs_paging_gprs_active.py:38: start network... 11:32:41.315082 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:32:41.837644 run create_hlr_db(pid=32311): Launched 11:32:42.028758 bus /gobi_6: Setting Powered False 11:32:43.050446 run create_hlr_db(pid=32311): Terminated: ok {rc=0} 11:32:43.468079 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32313): Launched 11:32:43.777846 run osmo-hlr_10.42.42.2(pid=32314): Launched 11:32:43.891297 run osmo-stp_10.42.42.5: Starting osmo-stp 11:32:44.426918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32316): Launched 11:32:44.737311 run osmo-stp_10.42.42.5(pid=32317): Launched 11:32:44.850615 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:32:45.391053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32319): Launched 11:32:45.500749 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:32:45.771104 run patchelf(pid=32320): Launched 11:32:45.958370 run osmo-stp_10.42.42.5(pid=32317): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32317)] 11:32:46.092334 run osmo-stp_10.42.42.5(pid=32317): stdout: | (launched: 2022-12-09_11:32:44.584299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:46.227378 run osmo-stp_10.42.42.5(pid=32317): stderr: | �[0;m�[38;5;43m20221209113244756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209113244757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209113244757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209113244757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:46.360048 run osmo-stp_10.42.42.5(pid=32317): stdout: | (launched: 2022-12-09_11:32:44.584299) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:46.489962 run osmo-stp_10.42.42.5(pid=32317): stderr: | �[0;m�[38;5;43m20221209113244756 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209113244757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209113244757 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209113244757 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209113244758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:46.641310 run patchelf(pid=32320): Terminating (SIGINT) 11:32:46.819173 run patchelf(pid=32320): Terminated: ok {rc=0} 11:32:46.852828 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32317): Process ended prematurely: osmo-stp_10.42.42.5(pid=32317) [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32317)] [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:32:46.863405 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:32:46.926054 run osmo-hlr_10.42.42.2(pid=32314): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32314)] 11:32:46.977734 run osmo-hlr_10.42.42.2(pid=32314): stdout: | (launched: 2022-12-09_11:32:43.625526) 11:32:47.030164 run osmo-hlr_10.42.42.2(pid=32314): stderr: | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209113243803 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209113243815 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209113243826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209113243826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209113243826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:32:47.074769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Terminating (SIGTERM) 11:32:47.118627 run iperf3-srv_10.42.42.10(pid=32308): Terminating (SIGTERM) 11:32:47.162266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32309): Terminating (SIGTERM) 11:32:47.204312 run iperf3-srv_10.42.42.10(pid=32310): Terminating (SIGTERM) 11:32:47.249055 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32313): Terminating (SIGTERM) 11:32:47.289820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32316): Terminating (SIGTERM) 11:32:47.330264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32319): Terminating (SIGTERM) 11:32:47.339467 --- ParallelTerminationStrategy: PID 32307 died... 11:32:47.393573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Terminated: ok {rc=0} 11:32:47.403191 --- ParallelTerminationStrategy: PID 32308 died... 11:32:47.457271 run iperf3-srv_10.42.42.10(pid=32308): Terminated {rc=256} 11:32:47.466836 --- ParallelTerminationStrategy: PID 32309 died... 11:32:47.520596 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32309): Terminated: ok {rc=0} 11:32:47.530230 --- ParallelTerminationStrategy: PID 32310 died... 11:32:47.584000 run iperf3-srv_10.42.42.10(pid=32310): Terminated {rc=256} 11:32:47.593674 --- ParallelTerminationStrategy: PID 32313 died... 11:32:47.647261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32313): Terminated: ok {rc=0} 11:32:47.656803 --- ParallelTerminationStrategy: PID 32316 died... 11:32:47.710333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32316): Terminated: ok {rc=0} 11:32:47.719927 --- ParallelTerminationStrategy: PID 32319 died... 11:32:47.773703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32319): Terminated: ok {rc=0} 11:32:47.864118 bus /gobi_0: Setting Powered False 11:32:48.969387 bus /gobi_0: Setting Powered False 11:32:50.076450 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32317): Process ended prematurely: osmo-stp_10.42.42.5(pid=32317) [trial-2359↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32317)]