Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31836): Process ended prematurely: osmo-stp_10.42.42.5(pid=31836) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31836)]
Standard Output
---------------------------------------------- trial-2359 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:25:38.169703 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.180518 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:25:38.325204 tst cs_paging_gprs_active.py: using LAC 21133 11:25:38.447292 tst cs_paging_gprs_active.py: using RAC 223 11:25:38.567921 tst cs_paging_gprs_active.py: using CellId 21133 11:25:38.687848 tst cs_paging_gprs_active.py: using BVCI 21134 11:25:38.711644 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.722621 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.733467 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.744262 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.755064 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.765973 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.776833 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.787711 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:25:38.798939 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:25:38.920558 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:25:39.223453 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:25:39.363490 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:25:39.709254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31826): Launched 11:25:39.995165 run iperf3-srv_10.42.42.10(pid=31827): Launched 11:25:40.185891 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:25:40.315714 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:25:40.638671 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31828): Launched 11:25:40.906512 run iperf3-srv_10.42.42.10(pid=31829): Launched 11:25:41.094955 tst cs_paging_gprs_active.py:38: start network... 11:25:41.223786 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:25:41.722644 run create_hlr_db(pid=31830): Launched 11:25:41.904164 bus /gobi_6: Setting Powered False 11:25:42.923006 run create_hlr_db(pid=31830): Terminated: ok {rc=0} 11:25:43.338048 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31832): Launched 11:25:43.651202 run osmo-hlr_10.42.42.2(pid=31833): Launched 11:25:43.765137 run osmo-stp_10.42.42.5: Starting osmo-stp 11:25:44.304162 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31835): Launched 11:25:44.615716 run osmo-stp_10.42.42.5(pid=31836): Launched 11:25:44.728791 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:25:45.270187 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31838): Launched 11:25:45.380382 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:25:45.653996 run patchelf(pid=31839): Launched 11:25:45.849865 run osmo-stp_10.42.42.5(pid=31836): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31836)] 11:25:46.001559 run osmo-stp_10.42.42.5(pid=31836): stdout: | (launched: 2022-12-09_11:25:44.462811) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:25:46.142076 run osmo-stp_10.42.42.5(pid=31836): stderr: | �[0;m�[38;5;43m20221209112544632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112544633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112544633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112544633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:25:46.275322 run osmo-stp_10.42.42.5(pid=31836): stdout: | (launched: 2022-12-09_11:25:44.462811) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:25:46.407678 run osmo-stp_10.42.42.5(pid=31836): stderr: | �[0;m�[38;5;43m20221209112544632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209112544633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209112544633 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209112544633 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209112544634 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:25:46.560917 run patchelf(pid=31839): Terminating (SIGINT) 11:25:46.742355 run patchelf(pid=31839): Terminated: ok {rc=0} 11:25:46.776143 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31836): Process ended prematurely: osmo-stp_10.42.42.5(pid=31836) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31836)] [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:25:46.786621 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:25:46.849524 run osmo-hlr_10.42.42.2(pid=31833): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31833)] 11:25:46.901062 run osmo-hlr_10.42.42.2(pid=31833): stdout: | (launched: 2022-12-09_11:25:43.496804) 11:25:46.952721 run osmo-hlr_10.42.42.2(pid=31833): stderr: | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209112543675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209112543687 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209112543695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209112543695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209112543695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:25:46.997238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31826): Terminating (SIGTERM) 11:25:47.040146 run iperf3-srv_10.42.42.10(pid=31827): Terminating (SIGTERM) 11:25:47.085426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31828): Terminating (SIGTERM) 11:25:47.127176 run iperf3-srv_10.42.42.10(pid=31829): Terminating (SIGTERM) 11:25:47.168254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31832): Terminating (SIGTERM) 11:25:47.209478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31835): Terminating (SIGTERM) 11:25:47.250016 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31838): Terminating (SIGTERM) 11:25:47.259275 --- ParallelTerminationStrategy: PID 31826 died... 11:25:47.313550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31826): Terminated: ok {rc=0} 11:25:47.323278 --- ParallelTerminationStrategy: PID 31827 died... 11:25:47.377202 run iperf3-srv_10.42.42.10(pid=31827): Terminated {rc=256} 11:25:47.386792 --- ParallelTerminationStrategy: PID 31828 died... 11:25:47.441054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31828): Terminated: ok {rc=0} 11:25:47.450677 --- ParallelTerminationStrategy: PID 31829 died... 11:25:47.504341 run iperf3-srv_10.42.42.10(pid=31829): Terminated {rc=256} 11:25:47.514098 --- ParallelTerminationStrategy: PID 31832 died... 11:25:47.567635 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31832): Terminated: ok {rc=0} 11:25:47.577342 --- ParallelTerminationStrategy: PID 31835 died... 11:25:47.631384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31835): Terminated: ok {rc=0} 11:25:47.641233 --- ParallelTerminationStrategy: PID 31838 died... 11:25:47.695554 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31838): Terminated: ok {rc=0} 11:25:47.784914 bus /gobi_0: Setting Powered False 11:25:48.889068 bus /gobi_0: Setting Powered False 11:25:49.996737 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31836): Process ended prematurely: osmo-stp_10.42.42.5(pid=31836) [trial-2359↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31836)]