Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1368): Process ended prematurely: osmo-stp_10.42.42.5(pid=1368) [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1368)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 11:42:13.548687 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:13.560655 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:42:13.701655 tst ping_idle_ping.py: using LAC 21220 11:42:13.821211 tst ping_idle_ping.py: using RAC 55 11:42:13.942774 tst ping_idle_ping.py: using CellId 21220 11:42:14.064404 tst ping_idle_ping.py: using BVCI 21221 11:42:14.087747 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.098879 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.110036 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.121075 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.131918 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.142832 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.153911 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:42:14.164684 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:42:14.460071 tst ping_idle_ping.py:24: start network... 11:42:14.596031 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:42:15.111419 run create_hlr_db(pid=1362): Launched 11:42:15.301228 bus /gobi_6: Setting Powered False 11:42:16.329496 run create_hlr_db(pid=1362): Terminated: ok {rc=0} 11:42:16.783078 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1364): Launched 11:42:17.173786 run osmo-hlr_10.42.42.2(pid=1365): Launched 11:42:17.285740 run osmo-stp_10.42.42.5: Starting osmo-stp 11:42:17.818655 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1367): Launched 11:42:18.123324 run osmo-stp_10.42.42.5(pid=1368): Launched 11:42:18.233536 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:42:18.766158 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1370): Launched 11:42:18.873979 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:42:19.140403 run patchelf(pid=1371): Launched 11:42:19.319796 run osmo-stp_10.42.42.5(pid=1368): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1368)] 11:42:19.450715 run osmo-stp_10.42.42.5(pid=1368): stdout: | (launched: 2022-12-09_11:42:17.973238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:19.582262 run osmo-stp_10.42.42.5(pid=1368): stderr: | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114218145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:19.708899 run osmo-stp_10.42.42.5(pid=1368): stdout: | (launched: 2022-12-09_11:42:17.973238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:19.834049 run osmo-stp_10.42.42.5(pid=1368): stderr: | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114218144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114218145 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114218145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:19.982011 run patchelf(pid=1371): Terminating (SIGINT) 11:42:20.155956 run patchelf(pid=1371): Terminated: ok {rc=0} 11:42:20.187390 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1368): Process ended prematurely: osmo-stp_10.42.42.5(pid=1368) [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1368)] [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 11:42:20.196082 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 11:42:20.256344 run osmo-hlr_10.42.42.2(pid=1365): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1365)] 11:42:20.305696 run osmo-hlr_10.42.42.2(pid=1365): stdout: | (launched: 2022-12-09_11:42:16.951616) 11:42:20.355746 run osmo-hlr_10.42.42.2(pid=1365): stderr: | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209114217196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209114217213 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209114217222 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209114217223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209114217223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:42:20.398137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1364): Terminating (SIGTERM) 11:42:20.438251 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1367): Terminating (SIGTERM) 11:42:20.478441 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1370): Terminating (SIGTERM) 11:42:20.487731 --- ParallelTerminationStrategy: PID 1364 died... 11:42:20.541653 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1364): Terminated: ok {rc=0} 11:42:20.551360 --- ParallelTerminationStrategy: PID 1367 died... 11:42:20.605012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1367): Terminated: ok {rc=0} 11:42:20.614723 --- ParallelTerminationStrategy: PID 1370 died... 11:42:20.668411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1370): Terminated: ok {rc=0} 11:42:20.759112 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1368): Process ended prematurely: osmo-stp_10.42.42.5(pid=1368) [trial-2359↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1368)]