Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=4202): Process ended prematurely: osmo-stp_10.42.42.5(pid=4202) [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4202)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 12:14:36.627294 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:36.638620 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 12:14:36.780671 tst cs_paging_gprs_active.py: using LAC 21391 12:14:36.910484 tst cs_paging_gprs_active.py: using RAC 226 12:14:37.039978 tst cs_paging_gprs_active.py: using CellId 21391 12:14:37.171509 tst cs_paging_gprs_active.py: using BVCI 21392 12:14:37.196907 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.208249 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.219368 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.230860 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.242182 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.253525 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.264886 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.276115 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:14:37.287612 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 12:14:37.411539 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 12:14:37.711789 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:14:37.850315 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:38.194882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4192): Launched 12:14:38.481778 run iperf3-srv_10.42.42.10(pid=4193): Launched 12:14:38.685240 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:14:38.824149 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:39.167591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4194): Launched 12:14:39.454328 run iperf3-srv_10.42.42.10(pid=4195): Launched 12:14:39.657126 tst cs_paging_gprs_active.py:38: start network... 12:14:39.795317 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:14:40.316564 run create_hlr_db(pid=4196): Launched 12:14:40.507531 bus /sierra_2: Setting Powered False 12:14:41.529079 run create_hlr_db(pid=4196): Terminated: ok {rc=0} 12:14:41.941627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4198): Launched 12:14:42.250513 run osmo-hlr_10.42.42.2(pid=4199): Launched 12:14:42.363567 run osmo-stp_10.42.42.5: Starting osmo-stp 12:14:42.896771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4201): Launched 12:14:43.205225 run osmo-stp_10.42.42.5(pid=4202): Launched 12:14:43.315910 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:14:43.853215 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4204): Launched 12:14:43.963179 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:14:44.234009 run patchelf(pid=4205): Launched 12:14:44.414403 run osmo-stp_10.42.42.5(pid=4202): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4202)] 12:14:44.545900 run osmo-stp_10.42.42.5(pid=4202): stdout: | (launched: 2022-12-09_12:14:43.053505) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:44.677258 run osmo-stp_10.42.42.5(pid=4202): stderr: | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209121443222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:44.804469 run osmo-stp_10.42.42.5(pid=4202): stdout: | (launched: 2022-12-09_12:14:43.053505) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:44.931075 run osmo-stp_10.42.42.5(pid=4202): stderr: | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209121443222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209121443222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209121443223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:45.079821 run patchelf(pid=4205): Terminating (SIGINT) 12:14:45.254676 run patchelf(pid=4205): Terminated: ok {rc=0} 12:14:45.286508 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4202): Process ended prematurely: osmo-stp_10.42.42.5(pid=4202) [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4202)] [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 12:14:45.295678 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:14:45.355720 run osmo-hlr_10.42.42.2(pid=4199): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4199)] 12:14:45.404639 run osmo-hlr_10.42.42.2(pid=4199): stdout: | (launched: 2022-12-09_12:14:42.098379) 12:14:45.454107 run osmo-hlr_10.42.42.2(pid=4199): stderr: | �[0;m�[1;31m20221209121442272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209121442272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209121442272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209121442272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209121442272 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209121442273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209121442285 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209121442295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209121442295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209121442295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:14:45.496463 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4192): Terminating (SIGTERM) 12:14:45.537043 run iperf3-srv_10.42.42.10(pid=4193): Terminating (SIGTERM) 12:14:45.578873 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4194): Terminating (SIGTERM) 12:14:45.618487 run iperf3-srv_10.42.42.10(pid=4195): Terminating (SIGTERM) 12:14:45.658158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4198): Terminating (SIGTERM) 12:14:45.697698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4201): Terminating (SIGTERM) 12:14:45.737394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4204): Terminating (SIGTERM) 12:14:45.746768 --- ParallelTerminationStrategy: PID 4192 died... 12:14:45.800532 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4192): Terminated: ok {rc=0} 12:14:45.810312 --- ParallelTerminationStrategy: PID 4193 died... 12:14:45.870925 run iperf3-srv_10.42.42.10(pid=4193): Terminated {rc=256} 12:14:45.882619 --- ParallelTerminationStrategy: PID 4194 died... 12:14:45.944766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4194): Terminated: ok {rc=0} 12:14:45.956076 --- ParallelTerminationStrategy: PID 4195 died... 12:14:46.015911 run iperf3-srv_10.42.42.10(pid=4195): Terminated {rc=256} 12:14:46.027084 --- ParallelTerminationStrategy: PID 4198 died... 12:14:46.086639 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4198): Terminated: ok {rc=0} 12:14:46.098970 --- ParallelTerminationStrategy: PID 4201 died... 12:14:46.158714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4201): Terminated: ok {rc=0} 12:14:46.171717 --- ParallelTerminationStrategy: PID 4204 died... 12:14:46.231726 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4204): Terminated: ok {rc=0} 12:14:46.329932 bus /gobi_0: Setting Powered False 12:14:47.437955 bus /gobi_0: Setting Powered False 12:14:48.545887 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4202): Process ended prematurely: osmo-stp_10.42.42.5(pid=4202) [trial-2359↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4202)]