Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2075): Process ended prematurely: osmo-stp_10.42.42.5(pid=2075) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2075)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:52:24.256735 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.267957 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:52:24.430185 tst cs_paging_gprs_active.py: using LAC 21273 11:52:24.553921 tst cs_paging_gprs_active.py: using RAC 108 11:52:24.675700 tst cs_paging_gprs_active.py: using CellId 21273 11:52:24.799259 tst cs_paging_gprs_active.py: using BVCI 21274 11:52:24.823250 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.834386 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.845271 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.856130 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.867113 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.878134 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.889204 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.899959 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:52:24.911105 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:52:25.035848 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:52:25.325393 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:52:25.455583 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:52:25.782488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2065): Launched 11:52:26.053980 run iperf3-srv_10.42.42.10(pid=2066): Launched 11:52:26.245703 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:52:26.376687 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:52:26.702677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2067): Launched 11:52:26.972769 run iperf3-srv_10.42.42.10(pid=2068): Launched 11:52:27.162712 tst cs_paging_gprs_active.py:38: start network... 11:52:27.292112 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:52:27.793634 run create_hlr_db(pid=2069): Launched 11:52:27.972829 bus /gobi_6: Setting Powered False 11:52:28.994681 run create_hlr_db(pid=2069): Terminated: ok {rc=0} 11:52:29.411945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2071): Launched 11:52:29.726014 run osmo-hlr_10.42.42.2(pid=2072): Launched 11:52:29.845065 run osmo-stp_10.42.42.5: Starting osmo-stp 11:52:30.387227 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2074): Launched 11:52:30.701169 run osmo-stp_10.42.42.5(pid=2075): Launched 11:52:30.813959 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:52:31.418351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2077): Launched 11:52:31.531386 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:52:31.814600 run patchelf(pid=2078): Launched 11:52:32.001117 run osmo-stp_10.42.42.5(pid=2075): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2075)] 11:52:32.136744 run osmo-stp_10.42.42.5(pid=2075): stdout: | (launched: 2022-12-09_11:52:30.546002) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:52:32.271742 run osmo-stp_10.42.42.5(pid=2075): stderr: | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115230722 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:52:32.401688 run osmo-stp_10.42.42.5(pid=2075): stdout: | (launched: 2022-12-09_11:52:30.546002) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:52:32.529926 run osmo-stp_10.42.42.5(pid=2075): stderr: | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115230722 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115230722 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115230723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:52:32.680622 run patchelf(pid=2078): Terminating (SIGINT) 11:52:32.858208 run patchelf(pid=2078): Terminated: ok {rc=0} 11:52:32.890624 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2075): Process ended prematurely: osmo-stp_10.42.42.5(pid=2075) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2075)] [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:52:32.899925 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:52:32.960743 run osmo-hlr_10.42.42.2(pid=2072): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2072)] 11:52:33.010832 run osmo-hlr_10.42.42.2(pid=2072): stdout: | (launched: 2022-12-09_11:52:29.571162) 11:52:33.061176 run osmo-hlr_10.42.42.2(pid=2072): stderr: | �[0;m�[1;31m20221209115229748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115229748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115229748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115229748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115229748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115229749 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115229761 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115229769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115229769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115229770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:52:33.103820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2065): Terminating (SIGTERM) 11:52:33.143887 run iperf3-srv_10.42.42.10(pid=2066): Terminating (SIGTERM) 11:52:33.184039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2067): Terminating (SIGTERM) 11:52:33.224162 run iperf3-srv_10.42.42.10(pid=2068): Terminating (SIGTERM) 11:52:33.264316 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2071): Terminating (SIGTERM) 11:52:33.304478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2074): Terminating (SIGTERM) 11:52:33.344545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2077): Terminating (SIGTERM) 11:52:33.353837 --- ParallelTerminationStrategy: PID 2065 died... 11:52:33.408053 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2065): Terminated: ok {rc=0} 11:52:33.417703 --- ParallelTerminationStrategy: PID 2066 died... 11:52:33.471116 run iperf3-srv_10.42.42.10(pid=2066): Terminated {rc=256} 11:52:33.480657 --- ParallelTerminationStrategy: PID 2067 died... 11:52:33.533852 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2067): Terminated: ok {rc=0} 11:52:33.543402 --- ParallelTerminationStrategy: PID 2068 died... 11:52:33.596666 run iperf3-srv_10.42.42.10(pid=2068): Terminated {rc=256} 11:52:33.606222 --- ParallelTerminationStrategy: PID 2071 died... 11:52:33.659554 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2071): Terminated: ok {rc=0} 11:52:33.669277 --- ParallelTerminationStrategy: PID 2074 died... 11:52:33.722756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2074): Terminated: ok {rc=0} 11:52:33.732300 --- ParallelTerminationStrategy: PID 2077 died... 11:52:33.785782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2077): Terminated: ok {rc=0} 11:52:33.870007 bus /gobi_0: Setting Powered False 11:52:34.977708 bus /gobi_0: Setting Powered False 11:52:36.086802 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2075): Process ended prematurely: osmo-stp_10.42.42.5(pid=2075) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2075)]