Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1935): Process ended prematurely: osmo-stp_10.42.42.5(pid=1935) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1935)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:50:21.628733 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:21.639958 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:50:21.779829 tst cs_paging_gprs_active.py: using LAC 21263 11:50:21.902961 tst cs_paging_gprs_active.py: using RAC 98 11:50:22.026059 tst cs_paging_gprs_active.py: using CellId 21263 11:50:22.147778 tst cs_paging_gprs_active.py: using BVCI 21264 11:50:22.172075 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.183082 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.193881 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.204658 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.215352 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.226118 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.237112 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.247958 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:50:22.259125 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:50:22.382533 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:50:22.688481 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:50:22.828436 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:50:23.175941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1923): Launched 11:50:23.465870 run iperf3-srv_10.42.42.10(pid=1924): Launched 11:50:23.671695 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:50:23.811814 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:50:24.159125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1925): Launched 11:50:24.448377 run iperf3-srv_10.42.42.10(pid=1926): Launched 11:50:24.653240 tst cs_paging_gprs_active.py:38: start network... 11:50:24.792624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:50:25.319787 run create_hlr_db(pid=1927): Launched 11:50:25.514136 bus /gobi_6: Setting Powered False 11:50:26.523453 run create_hlr_db(pid=1927): Terminated: ok {rc=0} 11:50:26.952213 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1931): Launched 11:50:27.267443 run osmo-hlr_10.42.42.2(pid=1932): Launched 11:50:27.392377 run osmo-stp_10.42.42.5: Starting osmo-stp 11:50:27.943029 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1934): Launched 11:50:28.256735 run osmo-stp_10.42.42.5(pid=1935): Launched 11:50:28.370462 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:50:28.915965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1937): Launched 11:50:29.027268 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:50:29.302669 run patchelf(pid=1938): Launched 11:50:29.486539 run osmo-stp_10.42.42.5(pid=1935): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1935)] 11:50:29.619926 run osmo-stp_10.42.42.5(pid=1935): stdout: | (launched: 2022-12-09_11:50:28.101751) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:50:29.753393 run osmo-stp_10.42.42.5(pid=1935): stderr: | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115028275 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:50:29.882864 run osmo-stp_10.42.42.5(pid=1935): stdout: | (launched: 2022-12-09_11:50:28.101751) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:50:30.011157 run osmo-stp_10.42.42.5(pid=1935): stderr: | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115028274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115028275 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115028275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:50:30.161713 run patchelf(pid=1938): Terminating (SIGINT) 11:50:30.338462 run patchelf(pid=1938): Terminated: ok {rc=0} 11:50:30.370968 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1935): Process ended prematurely: osmo-stp_10.42.42.5(pid=1935) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1935)] [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:50:30.380273 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:50:30.441254 run osmo-hlr_10.42.42.2(pid=1932): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1932)] 11:50:30.491413 run osmo-hlr_10.42.42.2(pid=1932): stdout: | (launched: 2022-12-09_11:50:27.111341) 11:50:30.542045 run osmo-hlr_10.42.42.2(pid=1932): stderr: | �[0;m�[1;31m20221209115027291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115027291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115027291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115027291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115027291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115027292 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115027304 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115027312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115027313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115027313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:50:30.585125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1923): Terminating (SIGTERM) 11:50:30.625684 run iperf3-srv_10.42.42.10(pid=1924): Terminating (SIGTERM) 11:50:30.666501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1925): Terminating (SIGTERM) 11:50:30.707206 run iperf3-srv_10.42.42.10(pid=1926): Terminating (SIGTERM) 11:50:30.747724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1931): Terminating (SIGTERM) 11:50:30.788274 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1934): Terminating (SIGTERM) 11:50:30.829070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1937): Terminating (SIGTERM) 11:50:30.842553 --- ParallelTerminationStrategy: PID 1923 died... 11:50:30.902489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1923): Terminated: ok {rc=0} 11:50:30.923392 --- ParallelTerminationStrategy: PID 1924 died... 11:50:30.985886 run iperf3-srv_10.42.42.10(pid=1924): Terminated {rc=256} 11:50:30.998009 --- ParallelTerminationStrategy: PID 1925 died... 11:50:31.058707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1925): Terminated: ok {rc=0} 11:50:31.069803 --- ParallelTerminationStrategy: PID 1926 died... 11:50:31.131116 run iperf3-srv_10.42.42.10(pid=1926): Terminated {rc=256} 11:50:31.142250 --- ParallelTerminationStrategy: PID 1931 died... 11:50:31.203655 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1931): Terminated: ok {rc=0} 11:50:31.214747 --- ParallelTerminationStrategy: PID 1934 died... 11:50:31.277049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1934): Terminated: ok {rc=0} 11:50:31.289989 --- ParallelTerminationStrategy: PID 1937 died... 11:50:31.358132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1937): Terminated: ok {rc=0} 11:50:31.466765 bus /gobi_0: Setting Powered False 11:50:32.570621 bus /gobi_0: Setting Powered False 11:50:33.683680 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1935): Process ended prematurely: osmo-stp_10.42.42.5(pid=1935) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1935)]