Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2782): Process ended prematurely: osmo-stp_10.42.42.5(pid=2782) [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2782)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:58:43.550395 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:43.561954 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:58:43.711172 tst cs_paging_gprs_active.py: using LAC 21307 11:58:43.841314 tst cs_paging_gprs_active.py: using RAC 142 11:58:43.973122 tst cs_paging_gprs_active.py: using CellId 21307 11:58:44.102504 tst cs_paging_gprs_active.py: using BVCI 21308 11:58:44.128065 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.139614 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.150960 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.163014 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.175761 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.187280 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.198953 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.210283 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:58:44.221971 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:58:44.341864 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:58:44.624474 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:58:44.753419 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:45.074695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2772): Launched 11:58:45.343334 run iperf3-srv_10.42.42.10(pid=2773): Launched 11:58:45.532191 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:58:45.660703 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:46.014710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2774): Launched 11:58:46.337765 run iperf3-srv_10.42.42.10(pid=2775): Launched 11:58:46.547353 tst cs_paging_gprs_active.py:38: start network... 11:58:46.692445 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:58:47.240659 run create_hlr_db(pid=2776): Launched 11:58:47.433895 bus /gobi_6: Setting Powered False 11:58:48.441622 run create_hlr_db(pid=2776): Terminated: ok {rc=0} 11:58:48.894740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2778): Launched 11:58:49.228272 run osmo-hlr_10.42.42.2(pid=2779): Launched 11:58:49.349469 run osmo-stp_10.42.42.5: Starting osmo-stp 11:58:49.924155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2781): Launched 11:58:50.257938 run osmo-stp_10.42.42.5(pid=2782): Launched 11:58:50.379184 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:58:50.960934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2784): Launched 11:58:51.079112 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:58:51.369579 run patchelf(pid=2785): Launched 11:58:51.563356 run osmo-stp_10.42.42.5(pid=2782): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2782)] 11:58:51.704925 run osmo-stp_10.42.42.5(pid=2782): stdout: | (launched: 2022-12-09_11:58:50.092655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:51.846265 run osmo-stp_10.42.42.5(pid=2782): stderr: | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115850285 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:51.983269 run osmo-stp_10.42.42.5(pid=2782): stdout: | (launched: 2022-12-09_11:58:50.092655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:52.119304 run osmo-stp_10.42.42.5(pid=2782): stderr: | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115850284 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115850285 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115850285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:52.278430 run patchelf(pid=2785): Terminating (SIGINT) 11:58:52.465775 run patchelf(pid=2785): Terminated: ok {rc=0} 11:58:52.499853 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2782): Process ended prematurely: osmo-stp_10.42.42.5(pid=2782) [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2782)] [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:58:52.509761 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 11:58:52.574039 run osmo-hlr_10.42.42.2(pid=2779): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2779)] 11:58:52.626345 run osmo-hlr_10.42.42.2(pid=2779): stdout: | (launched: 2022-12-09_11:58:49.063348) 11:58:52.679320 run osmo-hlr_10.42.42.2(pid=2779): stderr: | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115849260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115849272 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115849281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115849281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115849281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:58:52.724094 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2772): Terminating (SIGTERM) 11:58:52.766485 run iperf3-srv_10.42.42.10(pid=2773): Terminating (SIGTERM) 11:58:52.808788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2774): Terminating (SIGTERM) 11:58:52.851098 run iperf3-srv_10.42.42.10(pid=2775): Terminating (SIGTERM) 11:58:52.893553 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2778): Terminating (SIGTERM) 11:58:52.935907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2781): Terminating (SIGTERM) 11:58:52.977939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2784): Terminating (SIGTERM) 11:58:52.987974 --- ParallelTerminationStrategy: PID 2772 died... 11:58:53.044732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2772): Terminated: ok {rc=0} 11:58:53.054943 --- ParallelTerminationStrategy: PID 2773 died... 11:58:53.111371 run iperf3-srv_10.42.42.10(pid=2773): Terminated {rc=256} 11:58:53.121927 --- ParallelTerminationStrategy: PID 2774 died... 11:58:53.178625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2774): Terminated: ok {rc=0} 11:58:53.188765 --- ParallelTerminationStrategy: PID 2775 died... 11:58:53.245424 run iperf3-srv_10.42.42.10(pid=2775): Terminated {rc=256} 11:58:53.255503 --- ParallelTerminationStrategy: PID 2778 died... 11:58:53.311660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2778): Terminated: ok {rc=0} 11:58:53.322159 --- ParallelTerminationStrategy: PID 2781 died... 11:58:53.378311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2781): Terminated: ok {rc=0} 11:58:53.388357 --- ParallelTerminationStrategy: PID 2784 died... 11:58:53.445462 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2784): Terminated: ok {rc=0} 11:58:53.531643 bus /gobi_0: Setting Powered False 11:58:54.639063 bus /gobi_0: Setting Powered False 11:58:55.750792 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2782): Process ended prematurely: osmo-stp_10.42.42.5(pid=2782) [trial-2359↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2782)]