Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)]
Standard Output
---------------------------------------------- trial-2361 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:49:31.271438 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.284355 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:49:31.444479 tst cs_paging_gprs_active.py: using LAC 22399 16:49:31.599437 tst cs_paging_gprs_active.py: using RAC 214 16:49:31.754051 tst cs_paging_gprs_active.py: using CellId 22399 16:49:31.907016 tst cs_paging_gprs_active.py: using BVCI 22400 16:49:31.930814 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.942845 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.954729 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.968148 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.980418 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.992608 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:32.006502 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:32.018912 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:32.031435 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:32.153694 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:32.445286 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:49:32.570852 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:32.881268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24298): Launched 16:49:33.138300 run iperf3-srv_10.42.42.10(pid=24299): Launched 16:49:33.320318 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:49:33.444107 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:33.753346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24300): Launched 16:49:34.010416 run iperf3-srv_10.42.42.10(pid=24301): Launched 16:49:34.191521 tst cs_paging_gprs_active.py:38: start network... 16:49:34.315018 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:49:34.795786 run create_hlr_db(pid=24302): Launched 16:49:34.967486 bus /gobi_6: Setting Powered False 16:49:35.989729 run create_hlr_db(pid=24302): Terminated: ok {rc=0} 16:49:36.388590 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Launched 16:49:36.686447 run osmo-hlr_10.42.42.2(pid=24305): Launched 16:49:36.795381 run osmo-stp_10.42.42.5: Starting osmo-stp 16:49:37.313364 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Launched 16:49:37.612437 run osmo-stp_10.42.42.5(pid=24308): Launched 16:49:37.721395 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:49:38.243355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Launched 16:49:38.349730 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:49:38.611422 run patchelf(pid=24311): Launched 16:49:38.786556 run osmo-stp_10.42.42.5(pid=24308): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)] 16:49:38.914547 run osmo-stp_10.42.42.5(pid=24308): stdout: | (launched: 2022-12-09_16:49:37.465388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:39.043381 run osmo-stp_10.42.42.5(pid=24308): stderr: | �[0;m�[38;5;43m20221209164937635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164937636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164937636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164937636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:39.167492 run osmo-stp_10.42.42.5(pid=24308): stdout: | (launched: 2022-12-09_16:49:37.465388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:39.290207 run osmo-stp_10.42.42.5(pid=24308): stderr: | �[0;m�[38;5;43m20221209164937635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164937636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164937636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164937636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164937637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:39.433964 run patchelf(pid=24311): Terminating (SIGINT) 16:49:39.602485 run patchelf(pid=24311): Terminated: ok {rc=0} 16:49:39.633485 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)] [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:49:39.642629 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 16:49:39.701961 run osmo-hlr_10.42.42.2(pid=24305): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24305)] 16:49:39.750552 run osmo-hlr_10.42.42.2(pid=24305): stdout: | (launched: 2022-12-09_16:49:36.540279) 16:49:39.799854 run osmo-hlr_10.42.42.2(pid=24305): stderr: | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209164936716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209164936728 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209164936736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209164936737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209164936737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:49:39.841444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24298): Terminating (SIGTERM) 16:49:39.880996 run iperf3-srv_10.42.42.10(pid=24299): Terminating (SIGTERM) 16:49:39.920061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24300): Terminating (SIGTERM) 16:49:39.959096 run iperf3-srv_10.42.42.10(pid=24301): Terminating (SIGTERM) 16:49:39.998228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Terminating (SIGTERM) 16:49:40.037310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Terminating (SIGTERM) 16:49:40.077073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Terminating (SIGTERM) 16:49:40.086065 --- ParallelTerminationStrategy: PID 24298 died... 16:49:40.138684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24298): Terminated: ok {rc=0} 16:49:40.148005 --- ParallelTerminationStrategy: PID 24299 died... 16:49:40.200012 run iperf3-srv_10.42.42.10(pid=24299): Terminated {rc=256} 16:49:40.209381 --- ParallelTerminationStrategy: PID 24300 died... 16:49:40.261294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24300): Terminated: ok {rc=0} 16:49:40.270590 --- ParallelTerminationStrategy: PID 24301 died... 16:49:40.322639 run iperf3-srv_10.42.42.10(pid=24301): Terminated {rc=256} 16:49:40.331966 --- ParallelTerminationStrategy: PID 24304 died... 16:49:40.383999 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24304): Terminated: ok {rc=0} 16:49:40.393366 --- ParallelTerminationStrategy: PID 24307 died... 16:49:40.445554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24307): Terminated: ok {rc=0} 16:49:40.455219 --- ParallelTerminationStrategy: PID 24310 died... 16:49:40.507486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24310): Terminated: ok {rc=0} 16:49:40.594415 bus /gobi_0: Setting Powered False 16:49:41.696397 bus /gobi_0: Setting Powered False 16:49:42.807222 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24308): Process ended prematurely: osmo-stp_10.42.42.5(pid=24308) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24308)]