Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24341): Process ended prematurely: osmo-stp_10.42.42.5(pid=24341) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24341)]
Standard Output
---------------------------------------------- trial-2361 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 16:49:53.070352 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.083171 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:49:53.230001 tst iperf3m4.py: using LAC 22401 16:49:53.355029 tst iperf3m4.py: using RAC 216 16:49:53.481103 tst iperf3m4.py: using CellId 22401 16:49:53.607136 tst iperf3m4.py: using BVCI 22402 16:49:53.631518 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.643415 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.655219 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.667311 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.679331 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.691155 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.703967 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.716320 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:53.728112 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:53.844759 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:53.965975 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:54.083935 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:54.361471 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 16:49:54.486803 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:54.798876 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24324): Launched 16:49:55.057025 run iperf3-srv_10.42.42.10(pid=24325): Launched 16:49:55.240071 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 16:49:55.364372 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:55.675467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24326): Launched 16:49:55.932566 run iperf3-srv_10.42.42.10(pid=24327): Launched 16:49:56.116742 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 16:49:56.241474 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:56.553099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24328): Launched 16:49:56.810441 run iperf3-srv_10.42.42.10(pid=24329): Launched 16:49:56.993107 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 16:49:57.117490 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:57.431885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24330): Launched 16:49:57.688696 run iperf3-srv_10.42.42.10(pid=24331): Launched 16:49:57.870900 tst iperf3m4.py:8: start network... 16:49:57.995200 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:49:58.473763 run create_hlr_db(pid=24332): Launched 16:49:58.645866 bus /gobi_6: Setting Powered False 16:49:59.666644 run create_hlr_db(pid=24332): Terminated: ok {rc=0} 16:50:00.095561 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24334): Launched 16:50:00.416019 run osmo-hlr_10.42.42.2(pid=24335): Launched 16:50:00.535554 run osmo-stp_10.42.42.5: Starting osmo-stp 16:50:01.141186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24337): Launched 16:50:01.507557 run osmo-stp_10.42.42.5(pid=24341): Launched 16:50:01.675807 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:50:02.302625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24343): Launched 16:50:02.421041 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:50:02.703462 run patchelf(pid=24344): Launched 16:50:02.892745 run osmo-stp_10.42.42.5(pid=24341): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24341)] 16:50:03.030968 run osmo-stp_10.42.42.5(pid=24341): stdout: | (launched: 2022-12-09_16:50:01.303692) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:50:03.170086 run osmo-stp_10.42.42.5(pid=24341): stderr: | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209165001626 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:50:03.303643 run osmo-stp_10.42.42.5(pid=24341): stdout: | (launched: 2022-12-09_16:50:01.303692) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:50:03.436536 run osmo-stp_10.42.42.5(pid=24341): stderr: | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209165001626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209165001626 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209165001627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:50:03.590630 run patchelf(pid=24344): Terminating (SIGINT) 16:50:03.771675 run patchelf(pid=24344): Terminated: ok {rc=0} 16:50:03.804901 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24341): Process ended prematurely: osmo-stp_10.42.42.5(pid=24341) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24341)] [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 16:50:03.814865 tst iperf3m4.py:8: Test FAILED (10.8 sec) 16:50:03.879978 run osmo-hlr_10.42.42.2(pid=24335): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24335)] 16:50:03.931936 run osmo-hlr_10.42.42.2(pid=24335): stdout: | (launched: 2022-12-09_16:50:00.258631) 16:50:03.984655 run osmo-hlr_10.42.42.2(pid=24335): stderr: | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209165000456 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209165000468 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209165000476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209165000476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209165000477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:50:04.028698 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24324): Terminating (SIGTERM) 16:50:04.071208 run iperf3-srv_10.42.42.10(pid=24325): Terminating (SIGTERM) 16:50:04.114909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24326): Terminating (SIGTERM) 16:50:04.156450 run iperf3-srv_10.42.42.10(pid=24327): Terminating (SIGTERM) 16:50:04.199746 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24328): Terminating (SIGTERM) 16:50:04.241821 run iperf3-srv_10.42.42.10(pid=24329): Terminating (SIGTERM) 16:50:04.283620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24330): Terminating (SIGTERM) 16:50:04.325386 run iperf3-srv_10.42.42.10(pid=24331): Terminating (SIGTERM) 16:50:04.367593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24334): Terminating (SIGTERM) 16:50:04.409583 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24337): Terminating (SIGTERM) 16:50:04.451510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24343): Terminating (SIGTERM) 16:50:04.461181 --- ParallelTerminationStrategy: PID 24324 died... 16:50:04.516855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24324): Terminated: ok {rc=0} 16:50:04.526946 --- ParallelTerminationStrategy: PID 24325 died... 16:50:04.582469 run iperf3-srv_10.42.42.10(pid=24325): Terminated {rc=256} 16:50:04.592409 --- ParallelTerminationStrategy: PID 24326 died... 16:50:04.647977 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24326): Terminated: ok {rc=0} 16:50:04.658182 --- ParallelTerminationStrategy: PID 24327 died... 16:50:04.715281 run iperf3-srv_10.42.42.10(pid=24327): Terminated {rc=256} 16:50:04.725397 --- ParallelTerminationStrategy: PID 24328 died... 16:50:04.780535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24328): Terminated: ok {rc=0} 16:50:04.790698 --- ParallelTerminationStrategy: PID 24329 died... 16:50:04.846494 run iperf3-srv_10.42.42.10(pid=24329): Terminated {rc=256} 16:50:04.856666 --- ParallelTerminationStrategy: PID 24330 died... 16:50:04.912750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24330): Terminated: ok {rc=0} 16:50:04.922709 --- ParallelTerminationStrategy: PID 24331 died... 16:50:04.978646 run iperf3-srv_10.42.42.10(pid=24331): Terminated {rc=256} 16:50:04.988617 --- ParallelTerminationStrategy: PID 24334 died... 16:50:05.044028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24334): Terminated: ok {rc=0} 16:50:05.054192 --- ParallelTerminationStrategy: PID 24337 died... 16:50:05.109926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24337): Terminated: ok {rc=0} 16:50:05.120136 --- ParallelTerminationStrategy: PID 24343 died... 16:50:05.175930 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24343): Terminated: ok {rc=0} 16:50:05.261679 bus /gobi_4: Setting Powered False 16:50:06.369197 bus /gobi_4: Setting Powered False 16:50:07.476440 bus /gobi_1: Setting Powered False 16:50:08.576786 bus /gobi_1: Setting Powered False 16:50:09.689199 bus /gobi_0: Setting Powered False 16:50:10.795303 bus /gobi_0: Setting Powered False 16:50:11.903095 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24341): Process ended prematurely: osmo-stp_10.42.42.5(pid=24341) [trial-2361↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24341)]