Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=24151): Process ended prematurely: osmo-stp_10.42.42.5(pid=24151) [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24151)]
Standard Output
---------------------------------------------- trial-2361 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 16:47:22.735612 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:22.748060 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 16:47:22.884917 tst ping_idle_ping.py: using LAC 22388 16:47:23.001430 tst ping_idle_ping.py: using RAC 203 16:47:23.119895 tst ping_idle_ping.py: using CellId 22388 16:47:23.236546 tst ping_idle_ping.py: using BVCI 22389 16:47:23.259210 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.269948 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.280450 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.291517 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.302523 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.313538 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.324629 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:47:23.335625 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 16:47:23.629710 tst ping_idle_ping.py:24: start network... 16:47:23.764027 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:47:24.269585 run create_hlr_db(pid=24145): Launched 16:47:24.455442 bus /gobi_6: Setting Powered False 16:47:25.475074 run create_hlr_db(pid=24145): Terminated: ok {rc=0} 16:47:25.899470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24147): Launched 16:47:26.218410 run osmo-hlr_10.42.42.2(pid=24148): Launched 16:47:26.338171 run osmo-stp_10.42.42.5: Starting osmo-stp 16:47:26.892068 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24150): Launched 16:47:27.210274 run osmo-stp_10.42.42.5(pid=24151): Launched 16:47:27.326837 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:47:27.882286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24153): Launched 16:47:27.995867 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:47:28.273802 run patchelf(pid=24154): Launched 16:47:28.459926 run osmo-stp_10.42.42.5(pid=24151): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24151)] 16:47:28.596399 run osmo-stp_10.42.42.5(pid=24151): stdout: | (launched: 2022-12-09_16:47:27.053888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:28.733472 run osmo-stp_10.42.42.5(pid=24151): stderr: | �[0;m�[38;5;43m20221209164727244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164727244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164727245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164727245 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164727247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164727247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164727248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:28.865292 run osmo-stp_10.42.42.5(pid=24151): stdout: | (launched: 2022-12-09_16:47:27.053888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:47:28.995300 run osmo-stp_10.42.42.5(pid=24151): stderr: | �[0;m�[38;5;43m20221209164727244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164727244 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164727245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164727245 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164727247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164727247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164727248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:47:29.147581 run patchelf(pid=24154): Terminating (SIGINT) 16:47:29.326415 run patchelf(pid=24154): Terminated: ok {rc=0} 16:47:29.358625 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24151): Process ended prematurely: osmo-stp_10.42.42.5(pid=24151) [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24151)] [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 16:47:29.367905 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 16:47:29.431302 run osmo-hlr_10.42.42.2(pid=24148): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24148)] 16:47:29.482727 run osmo-hlr_10.42.42.2(pid=24148): stdout: | (launched: 2022-12-09_16:47:26.061664) 16:47:29.534571 run osmo-hlr_10.42.42.2(pid=24148): stderr: | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209164726259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209164726276 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209164726286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209164726286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209164726286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:47:29.578997 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24147): Terminating (SIGTERM) 16:47:29.620628 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24150): Terminating (SIGTERM) 16:47:29.662839 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24153): Terminating (SIGTERM) 16:47:29.672659 --- ParallelTerminationStrategy: PID 24147 died... 16:47:29.728599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24147): Terminated: ok {rc=0} 16:47:29.738948 --- ParallelTerminationStrategy: PID 24150 died... 16:47:29.794814 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24150): Terminated: ok {rc=0} 16:47:29.805455 --- ParallelTerminationStrategy: PID 24153 died... 16:47:29.861534 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24153): Terminated: ok {rc=0} 16:47:29.948682 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24151): Process ended prematurely: osmo-stp_10.42.42.5(pid=24151) [trial-2361↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24151)]