Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19575): Process ended prematurely: osmo-stp_10.42.42.5(pid=19575) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19575)]
Standard Output
---------------------------------------------- trial-2361 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 15:53:31.953485 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:31.965838 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:53:32.149373 tst cs_paging_gprs_active.py: using LAC 22102 15:53:32.294583 tst cs_paging_gprs_active.py: using RAC 172 15:53:32.418063 tst cs_paging_gprs_active.py: using CellId 22102 15:53:32.536134 tst cs_paging_gprs_active.py: using BVCI 22103 15:53:32.559537 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.570439 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.581074 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.591658 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.602195 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.612778 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.623596 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.634174 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:53:32.644867 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:53:32.766612 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:53:33.069246 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:53:33.207402 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:33.548774 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19565): Launched 15:53:33.832188 run iperf3-srv_10.42.42.10(pid=19566): Launched 15:53:34.034004 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:53:34.171339 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:34.511150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19567): Launched 15:53:34.793081 run iperf3-srv_10.42.42.10(pid=19568): Launched 15:53:34.993520 tst cs_paging_gprs_active.py:38: start network... 15:53:35.130326 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:53:35.646433 run create_hlr_db(pid=19569): Launched 15:53:35.837793 bus /gobi_6: Setting Powered False 15:53:36.858721 run create_hlr_db(pid=19569): Terminated: ok {rc=0} 15:53:37.272695 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19571): Launched 15:53:37.581640 run osmo-hlr_10.42.42.2(pid=19572): Launched 15:53:37.704415 run osmo-stp_10.42.42.5: Starting osmo-stp 15:53:38.240184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19574): Launched 15:53:38.546986 run osmo-stp_10.42.42.5(pid=19575): Launched 15:53:38.658608 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:53:39.196020 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19577): Launched 15:53:39.305414 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:53:39.574737 run patchelf(pid=19578): Launched 15:53:39.754857 run osmo-stp_10.42.42.5(pid=19575): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19575)] 15:53:39.886036 run osmo-stp_10.42.42.5(pid=19575): stdout: | (launched: 2022-12-09_15:53:38.396308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:40.017739 run osmo-stp_10.42.42.5(pid=19575): stderr: | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155338565 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:40.143855 run osmo-stp_10.42.42.5(pid=19575): stdout: | (launched: 2022-12-09_15:53:38.396308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:40.268433 run osmo-stp_10.42.42.5(pid=19575): stderr: | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155338564 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155338565 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155338565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:40.415248 run patchelf(pid=19578): Terminating (SIGINT) 15:53:40.587650 run patchelf(pid=19578): Terminated: ok {rc=0} 15:53:40.619376 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19575): Process ended prematurely: osmo-stp_10.42.42.5(pid=19575) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19575)] [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 15:53:40.628438 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 15:53:40.688135 run osmo-hlr_10.42.42.2(pid=19572): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19572)] 15:53:40.736731 run osmo-hlr_10.42.42.2(pid=19572): stdout: | (launched: 2022-12-09_15:53:37.428472) 15:53:40.786143 run osmo-hlr_10.42.42.2(pid=19572): stderr: | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209155337604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209155337616 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209155337624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209155337625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209155337625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:53:40.828190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19565): Terminating (SIGTERM) 15:53:40.867673 run iperf3-srv_10.42.42.10(pid=19566): Terminating (SIGTERM) 15:53:40.907166 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19567): Terminating (SIGTERM) 15:53:40.946624 run iperf3-srv_10.42.42.10(pid=19568): Terminating (SIGTERM) 15:53:40.986259 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19571): Terminating (SIGTERM) 15:53:41.025890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19574): Terminating (SIGTERM) 15:53:41.065348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19577): Terminating (SIGTERM) 15:53:41.074365 --- ParallelTerminationStrategy: PID 19565 died... 15:53:41.127395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19565): Terminated: ok {rc=0} 15:53:41.136830 --- ParallelTerminationStrategy: PID 19566 died... 15:53:41.189185 run iperf3-srv_10.42.42.10(pid=19566): Terminated {rc=256} 15:53:41.198700 --- ParallelTerminationStrategy: PID 19567 died... 15:53:41.251771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19567): Terminated: ok {rc=0} 15:53:41.261230 --- ParallelTerminationStrategy: PID 19568 died... 15:53:41.314459 run iperf3-srv_10.42.42.10(pid=19568): Terminated {rc=256} 15:53:41.323875 --- ParallelTerminationStrategy: PID 19571 died... 15:53:41.376840 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19571): Terminated: ok {rc=0} 15:53:41.386310 --- ParallelTerminationStrategy: PID 19574 died... 15:53:41.439171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19574): Terminated: ok {rc=0} 15:53:41.448708 --- ParallelTerminationStrategy: PID 19577 died... 15:53:41.501553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19577): Terminated: ok {rc=0} 15:53:41.588891 bus /gobi_0: Setting Powered False 15:53:42.697172 bus /gobi_0: Setting Powered False 15:53:43.805617 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19575): Process ended prematurely: osmo-stp_10.42.42.5(pid=19575) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19575)]