Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19165): Process ended prematurely: osmo-stp_10.42.42.5(pid=19165) [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19165)]
Standard Output
---------------------------------------------- trial-2361 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:51:30.884063 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:30.895496 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:51:31.042343 tst cs_paging_gprs_active.py: using LAC 22092 15:51:31.169238 tst cs_paging_gprs_active.py: using RAC 162 15:51:31.291330 tst cs_paging_gprs_active.py: using CellId 22092 15:51:31.414698 tst cs_paging_gprs_active.py: using BVCI 22093 15:51:31.439211 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.450454 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.461796 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.473035 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.484272 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.495274 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.507067 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.518023 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:51:31.529500 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:51:31.647498 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:51:31.942478 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:51:32.077675 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:51:32.399125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19155): Launched 15:51:32.653530 run iperf3-srv_10.42.42.10(pid=19156): Launched 15:51:32.832642 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:51:32.954520 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:51:33.261962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19157): Launched 15:51:33.516089 run iperf3-srv_10.42.42.10(pid=19158): Launched 15:51:33.694635 tst cs_paging_gprs_active.py:38: start network... 15:51:33.816872 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:51:34.292466 run create_hlr_db(pid=19159): Launched 15:51:34.461656 bus /gobi_6: Setting Powered False 15:51:35.482947 run create_hlr_db(pid=19159): Terminated: ok {rc=0} 15:51:35.905183 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19161): Launched 15:51:36.222074 run osmo-hlr_10.42.42.2(pid=19162): Launched 15:51:36.338449 run osmo-stp_10.42.42.5: Starting osmo-stp 15:51:36.886667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19164): Launched 15:51:37.202494 run osmo-stp_10.42.42.5(pid=19165): Launched 15:51:37.317248 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:51:37.870755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19167): Launched 15:51:37.984074 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:51:38.261478 run patchelf(pid=19168): Launched 15:51:38.447401 run osmo-stp_10.42.42.5(pid=19165): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19165)] 15:51:38.583332 run osmo-stp_10.42.42.5(pid=19165): stdout: | (launched: 2022-12-09_15:51:37.047257) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:51:38.720377 run osmo-stp_10.42.42.5(pid=19165): stderr: | �[0;m�[38;5;43m20221209155137239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155137240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155137240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155137240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:51:38.851724 run osmo-stp_10.42.42.5(pid=19165): stdout: | (launched: 2022-12-09_15:51:37.047257) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:51:38.981806 run osmo-stp_10.42.42.5(pid=19165): stderr: | �[0;m�[38;5;43m20221209155137239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155137240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155137240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155137240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155137241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:51:39.134059 run patchelf(pid=19168): Terminating (SIGINT) 15:51:39.312040 run patchelf(pid=19168): Terminated: ok {rc=0} 15:51:39.345078 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19165): Process ended prematurely: osmo-stp_10.42.42.5(pid=19165) [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19165)] [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:51:39.354909 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 15:51:39.417628 run osmo-hlr_10.42.42.2(pid=19162): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19162)] 15:51:39.468693 run osmo-hlr_10.42.42.2(pid=19162): stdout: | (launched: 2022-12-09_15:51:36.066095) 15:51:39.520517 run osmo-hlr_10.42.42.2(pid=19162): stderr: | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209155136265 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209155136278 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209155136286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209155136286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209155136286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:51:39.564517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19155): Terminating (SIGTERM) 15:51:39.606824 run iperf3-srv_10.42.42.10(pid=19156): Terminating (SIGTERM) 15:51:39.648552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19157): Terminating (SIGTERM) 15:51:39.690144 run iperf3-srv_10.42.42.10(pid=19158): Terminating (SIGTERM) 15:51:39.731921 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19161): Terminating (SIGTERM) 15:51:39.774055 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19164): Terminating (SIGTERM) 15:51:39.815885 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19167): Terminating (SIGTERM) 15:51:39.825508 --- ParallelTerminationStrategy: PID 19155 died... 15:51:39.881826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19155): Terminated: ok {rc=0} 15:51:39.891669 --- ParallelTerminationStrategy: PID 19156 died... 15:51:39.946821 run iperf3-srv_10.42.42.10(pid=19156): Terminated {rc=256} 15:51:39.957247 --- ParallelTerminationStrategy: PID 19157 died... 15:51:40.012286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19157): Terminated: ok {rc=0} 15:51:40.022459 --- ParallelTerminationStrategy: PID 19158 died... 15:51:40.077709 run iperf3-srv_10.42.42.10(pid=19158): Terminated {rc=256} 15:51:40.087587 --- ParallelTerminationStrategy: PID 19161 died... 15:51:40.142893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19161): Terminated: ok {rc=0} 15:51:40.152664 --- ParallelTerminationStrategy: PID 19164 died... 15:51:40.208100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19164): Terminated: ok {rc=0} 15:51:40.218108 --- ParallelTerminationStrategy: PID 19167 died... 15:51:40.273752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19167): Terminated: ok {rc=0} 15:51:40.360819 bus /gobi_0: Setting Powered False 15:51:41.466834 bus /gobi_0: Setting Powered False 15:51:42.576648 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19165): Process ended prematurely: osmo-stp_10.42.42.5(pid=19165) [trial-2361↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19165)]