Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18758): Process ended prematurely: osmo-stp_10.42.42.5(pid=18758) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18758)]
Standard Output
---------------------------------------------- trial-2361 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 15:45:40.748016 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:40.758767 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:45:40.901500 tst cs_paging_gprs_active.py: using LAC 22060 15:45:41.017948 tst cs_paging_gprs_active.py: using RAC 130 15:45:41.141837 tst cs_paging_gprs_active.py: using CellId 22060 15:45:41.266398 tst cs_paging_gprs_active.py: using BVCI 22061 15:45:41.291006 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.302309 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.313306 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.324681 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.335913 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.347637 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.359284 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.370270 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:45:41.381391 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:45:41.496782 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:45:41.787351 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:45:41.922319 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:45:42.256213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18748): Launched 15:45:42.532386 run iperf3-srv_10.42.42.10(pid=18749): Launched 15:45:42.729062 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:45:42.862850 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:45:43.195864 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18750): Launched 15:45:43.472863 run iperf3-srv_10.42.42.10(pid=18751): Launched 15:45:43.669011 tst cs_paging_gprs_active.py:38: start network... 15:45:43.802686 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:45:44.307621 run create_hlr_db(pid=18752): Launched 15:45:44.494050 bus /gobi_6: Setting Powered False 15:45:45.515025 run create_hlr_db(pid=18752): Terminated: ok {rc=0} 15:45:45.943418 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18754): Launched 15:45:46.358479 run osmo-hlr_10.42.42.2(pid=18755): Launched 15:45:46.583172 run osmo-stp_10.42.42.5: Starting osmo-stp 15:45:47.193949 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18757): Launched 15:45:47.519304 run osmo-stp_10.42.42.5(pid=18758): Launched 15:45:47.637054 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:45:48.196620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18760): Launched 15:45:48.310636 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:45:48.591247 run patchelf(pid=18761): Launched 15:45:48.779287 run osmo-stp_10.42.42.5(pid=18758): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18758)] 15:45:48.916570 run osmo-stp_10.42.42.5(pid=18758): stdout: | (launched: 2022-12-09_15:45:47.359534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:45:49.054032 run osmo-stp_10.42.42.5(pid=18758): stderr: | �[0;m�[38;5;43m20221209154547550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154547551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154547551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154547551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:45:49.186641 run osmo-stp_10.42.42.5(pid=18758): stdout: | (launched: 2022-12-09_15:45:47.359534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:45:49.318136 run osmo-stp_10.42.42.5(pid=18758): stderr: | �[0;m�[38;5;43m20221209154547550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154547551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154547551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154547551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154547552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:45:49.472306 run patchelf(pid=18761): Terminating (SIGINT) 15:45:49.652696 run patchelf(pid=18761): Terminated: ok {rc=0} 15:45:49.685665 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18758): Process ended prematurely: osmo-stp_10.42.42.5(pid=18758) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18758)] [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 15:45:49.695376 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 15:45:49.757673 run osmo-hlr_10.42.42.2(pid=18755): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18755)] 15:45:49.808738 run osmo-hlr_10.42.42.2(pid=18755): stdout: | (launched: 2022-12-09_15:45:46.110971) 15:45:49.859996 run osmo-hlr_10.42.42.2(pid=18755): stderr: | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209154546437 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209154546453 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209154546462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209154546462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209154546462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:45:49.903561 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18748): Terminating (SIGTERM) 15:45:49.944635 run iperf3-srv_10.42.42.10(pid=18749): Terminating (SIGTERM) 15:45:49.986026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18750): Terminating (SIGTERM) 15:45:50.027472 run iperf3-srv_10.42.42.10(pid=18751): Terminating (SIGTERM) 15:45:50.068406 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18754): Terminating (SIGTERM) 15:45:50.110000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18757): Terminating (SIGTERM) 15:45:50.150917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18760): Terminating (SIGTERM) 15:45:50.160646 --- ParallelTerminationStrategy: PID 18748 died... 15:45:50.216034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18748): Terminated: ok {rc=0} 15:45:50.225949 --- ParallelTerminationStrategy: PID 18749 died... 15:45:50.280998 run iperf3-srv_10.42.42.10(pid=18749): Terminated {rc=256} 15:45:50.290879 --- ParallelTerminationStrategy: PID 18750 died... 15:45:50.345853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18750): Terminated: ok {rc=0} 15:45:50.355935 --- ParallelTerminationStrategy: PID 18751 died... 15:45:50.410866 run iperf3-srv_10.42.42.10(pid=18751): Terminated {rc=256} 15:45:50.420844 --- ParallelTerminationStrategy: PID 18754 died... 15:45:50.476133 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18754): Terminated: ok {rc=0} 15:45:50.486288 --- ParallelTerminationStrategy: PID 18757 died... 15:45:50.541096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18757): Terminated: ok {rc=0} 15:45:50.551238 --- ParallelTerminationStrategy: PID 18760 died... 15:45:50.606815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18760): Terminated: ok {rc=0} 15:45:50.692931 bus /gobi_0: Setting Powered False 15:45:51.798622 bus /gobi_0: Setting Powered False 15:45:52.903978 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18758): Process ended prematurely: osmo-stp_10.42.42.5(pid=18758) [trial-2361↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18758)]