Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18618): Process ended prematurely: osmo-stp_10.42.42.5(pid=18618) [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18618)]
Standard Output
---------------------------------------------- trial-2361 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:43:41.970551 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:41.981949 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:43:42.112327 tst cs_paging_gprs_active.py: using LAC 22050 15:43:42.238298 tst cs_paging_gprs_active.py: using RAC 120 15:43:42.365484 tst cs_paging_gprs_active.py: using CellId 22050 15:43:42.491093 tst cs_paging_gprs_active.py: using BVCI 22051 15:43:42.515645 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.526914 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.537833 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.549321 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.560600 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.571694 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.583095 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.594205 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:42.605720 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:43:42.722300 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:43:43.015609 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:43:43.150686 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:43:43.485147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18608): Launched 15:43:43.762768 run iperf3-srv_10.42.42.10(pid=18609): Launched 15:43:43.960673 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:43:44.095437 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:43:44.431430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18610): Launched 15:43:44.709457 run iperf3-srv_10.42.42.10(pid=18611): Launched 15:43:44.907610 tst cs_paging_gprs_active.py:38: start network... 15:43:45.042690 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:43:45.548859 run create_hlr_db(pid=18612): Launched 15:43:45.735864 bus /gobi_6: Setting Powered False 15:43:46.756608 run create_hlr_db(pid=18612): Terminated: ok {rc=0} 15:43:47.207039 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18614): Launched 15:43:47.531652 run osmo-hlr_10.42.42.2(pid=18615): Launched 15:43:47.652754 run osmo-stp_10.42.42.5: Starting osmo-stp 15:43:48.214015 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18617): Launched 15:43:48.537624 run osmo-stp_10.42.42.5(pid=18618): Launched 15:43:48.654360 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:43:49.218764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18620): Launched 15:43:49.333603 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:43:49.615513 run patchelf(pid=18621): Launched 15:43:49.804069 run osmo-stp_10.42.42.5(pid=18618): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18618)] 15:43:49.942109 run osmo-stp_10.42.42.5(pid=18618): stdout: | (launched: 2022-12-09_15:43:48.378502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:43:50.079752 run osmo-stp_10.42.42.5(pid=18618): stderr: | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154348571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:43:50.213006 run osmo-stp_10.42.42.5(pid=18618): stdout: | (launched: 2022-12-09_15:43:48.378502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:43:50.344797 run osmo-stp_10.42.42.5(pid=18618): stderr: | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209154348570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209154348571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209154348571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:43:50.499024 run patchelf(pid=18621): Terminating (SIGINT) 15:43:50.680149 run patchelf(pid=18621): Terminated: ok {rc=0} 15:43:50.713460 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18618): Process ended prematurely: osmo-stp_10.42.42.5(pid=18618) [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18618)] [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:43:50.723395 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 15:43:50.786800 run osmo-hlr_10.42.42.2(pid=18615): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18615)] 15:43:50.838290 run osmo-hlr_10.42.42.2(pid=18615): stdout: | (launched: 2022-12-09_15:43:47.371102) 15:43:50.890589 run osmo-hlr_10.42.42.2(pid=18615): stderr: | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209154347570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209154347583 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209154347592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209154347593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209154347593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:43:50.935203 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18608): Terminating (SIGTERM) 15:43:50.976910 run iperf3-srv_10.42.42.10(pid=18609): Terminating (SIGTERM) 15:43:51.019419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18610): Terminating (SIGTERM) 15:43:51.061143 run iperf3-srv_10.42.42.10(pid=18611): Terminating (SIGTERM) 15:43:51.103309 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18614): Terminating (SIGTERM) 15:43:51.145586 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18617): Terminating (SIGTERM) 15:43:51.187737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18620): Terminating (SIGTERM) 15:43:51.197478 --- ParallelTerminationStrategy: PID 18608 died... 15:43:51.253827 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18608): Terminated: ok {rc=0} 15:43:51.263890 --- ParallelTerminationStrategy: PID 18609 died... 15:43:51.319406 run iperf3-srv_10.42.42.10(pid=18609): Terminated {rc=256} 15:43:51.330070 --- ParallelTerminationStrategy: PID 18610 died... 15:43:51.386197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18610): Terminated: ok {rc=0} 15:43:51.396519 --- ParallelTerminationStrategy: PID 18611 died... 15:43:51.451961 run iperf3-srv_10.42.42.10(pid=18611): Terminated {rc=256} 15:43:51.462253 --- ParallelTerminationStrategy: PID 18614 died... 15:43:51.518009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18614): Terminated: ok {rc=0} 15:43:51.528031 --- ParallelTerminationStrategy: PID 18617 died... 15:43:51.583802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18617): Terminated: ok {rc=0} 15:43:51.594225 --- ParallelTerminationStrategy: PID 18620 died... 15:43:51.649597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18620): Terminated: ok {rc=0} 15:43:51.734777 bus /gobi_0: Setting Powered False 15:43:52.840171 bus /gobi_0: Setting Powered False 15:43:53.951520 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18618): Process ended prematurely: osmo-stp_10.42.42.5(pid=18618) [trial-2361↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18618)]