Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20183): Process ended prematurely: osmo-stp_10.42.42.5(pid=20183) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20183)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:02:09.992017 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.003075 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:02:10.161429 tst cs_paging_gprs_active.py: using LAC 22148 16:02:10.289126 tst cs_paging_gprs_active.py: using RAC 218 16:02:10.419038 tst cs_paging_gprs_active.py: using CellId 22148 16:02:10.548208 tst cs_paging_gprs_active.py: using BVCI 22149 16:02:10.573378 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.584813 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.596282 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.607789 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.619142 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.630630 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.642231 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.654355 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:10.665885 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:02:10.785578 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:02:11.086383 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:02:11.224558 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:11.568697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20173): Launched 16:02:11.853289 run iperf3-srv_10.42.42.10(pid=20174): Launched 16:02:12.056030 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:02:12.193842 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:12.536409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20175): Launched 16:02:12.820924 run iperf3-srv_10.42.42.10(pid=20176): Launched 16:02:13.024818 tst cs_paging_gprs_active.py:38: start network... 16:02:13.163119 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:02:13.684182 run create_hlr_db(pid=20177): Launched 16:02:13.875355 bus /gobi_6: Setting Powered False 16:02:14.896069 run create_hlr_db(pid=20177): Terminated: ok {rc=0} 16:02:15.337969 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20179): Launched 16:02:15.670409 run osmo-hlr_10.42.42.2(pid=20180): Launched 16:02:15.790557 run osmo-stp_10.42.42.5: Starting osmo-stp 16:02:16.428815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20182): Launched 16:02:16.877220 run osmo-stp_10.42.42.5(pid=20183): Launched 16:02:16.995033 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:02:17.652764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20185): Launched 16:02:17.762763 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:02:18.034832 run patchelf(pid=20186): Launched 16:02:18.215593 run osmo-stp_10.42.42.5(pid=20183): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20183)] 16:02:18.347486 run osmo-stp_10.42.42.5(pid=20183): stdout: | (launched: 2022-12-09_16:02:16.598970) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:18.479885 run osmo-stp_10.42.42.5(pid=20183): stderr: | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160216846 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:18.607711 run osmo-stp_10.42.42.5(pid=20183): stdout: | (launched: 2022-12-09_16:02:16.598970) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:18.733855 run osmo-stp_10.42.42.5(pid=20183): stderr: | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160216845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160216846 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160216846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:18.881400 run patchelf(pid=20186): Terminating (SIGINT) 16:02:19.055085 run patchelf(pid=20186): Terminated: ok {rc=0} 16:02:19.086902 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20183): Process ended prematurely: osmo-stp_10.42.42.5(pid=20183) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20183)] [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:02:19.096073 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 16:02:19.156405 run osmo-hlr_10.42.42.2(pid=20180): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20180)] 16:02:19.205259 run osmo-hlr_10.42.42.2(pid=20180): stdout: | (launched: 2022-12-09_16:02:15.506014) 16:02:19.254801 run osmo-hlr_10.42.42.2(pid=20180): stderr: | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160215703 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160215716 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160215724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160215725 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160215725 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:02:19.297222 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20173): Terminating (SIGTERM) 16:02:19.343059 run iperf3-srv_10.42.42.10(pid=20174): Terminating (SIGTERM) 16:02:19.385134 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20175): Terminating (SIGTERM) 16:02:19.427423 run iperf3-srv_10.42.42.10(pid=20176): Terminating (SIGTERM) 16:02:19.470867 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20179): Terminating (SIGTERM) 16:02:19.513415 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20182): Terminating (SIGTERM) 16:02:19.556178 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20185): Terminating (SIGTERM) 16:02:19.566472 --- ParallelTerminationStrategy: PID 20173 died... 16:02:19.624106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20173): Terminated: ok {rc=0} 16:02:19.634299 --- ParallelTerminationStrategy: PID 20174 died... 16:02:19.690799 run iperf3-srv_10.42.42.10(pid=20174): Terminated {rc=256} 16:02:19.700804 --- ParallelTerminationStrategy: PID 20175 died... 16:02:19.756517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20175): Terminated: ok {rc=0} 16:02:19.766886 --- ParallelTerminationStrategy: PID 20176 died... 16:02:19.822573 run iperf3-srv_10.42.42.10(pid=20176): Terminated {rc=256} 16:02:19.832655 --- ParallelTerminationStrategy: PID 20179 died... 16:02:19.888812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20179): Terminated: ok {rc=0} 16:02:19.898894 --- ParallelTerminationStrategy: PID 20182 died... 16:02:19.955117 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20182): Terminated: ok {rc=0} 16:02:19.965467 --- ParallelTerminationStrategy: PID 20185 died... 16:02:20.021104 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20185): Terminated: ok {rc=0} 16:02:20.107628 bus /gobi_0: Setting Powered False 16:02:21.214422 bus /gobi_0: Setting Powered False 16:02:22.323003 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20183): Process ended prematurely: osmo-stp_10.42.42.5(pid=20183) [trial-2361↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20183)]