Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21076): Process ended prematurely: osmo-stp_10.42.42.5(pid=21076) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21076)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:11:07.792337 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:07.803645 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:11:07.965295 tst cs_paging_gprs_active.py: using LAC 22195 16:11:08.085688 tst cs_paging_gprs_active.py: using RAC 10 16:11:08.206710 tst cs_paging_gprs_active.py: using CellId 22195 16:11:08.329136 tst cs_paging_gprs_active.py: using BVCI 22196 16:11:08.352622 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.363649 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.374645 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.385615 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.396531 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.407313 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.418429 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.429297 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.440514 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:11:08.561531 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:11:08.846100 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:11:08.975011 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:09.296133 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21066): Launched 16:11:09.563278 run iperf3-srv_10.42.42.10(pid=21067): Launched 16:11:09.751521 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:11:09.880193 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:10.204550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21068): Launched 16:11:10.470657 run iperf3-srv_10.42.42.10(pid=21069): Launched 16:11:10.659081 tst cs_paging_gprs_active.py:38: start network... 16:11:10.787806 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:11:11.283883 run create_hlr_db(pid=21070): Launched 16:11:11.461609 bus /gobi_6: Setting Powered False 16:11:12.482212 run create_hlr_db(pid=21070): Terminated: ok {rc=0} 16:11:12.923352 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21072): Launched 16:11:13.255362 run osmo-hlr_10.42.42.2(pid=21073): Launched 16:11:13.376362 run osmo-stp_10.42.42.5: Starting osmo-stp 16:11:13.950793 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21075): Launched 16:11:14.281335 run osmo-stp_10.42.42.5(pid=21076): Launched 16:11:14.402113 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:11:14.977373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21078): Launched 16:11:15.095191 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:11:15.384496 run patchelf(pid=21079): Launched 16:11:15.577753 run osmo-stp_10.42.42.5(pid=21076): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21076)] 16:11:15.718954 run osmo-stp_10.42.42.5(pid=21076): stdout: | (launched: 2022-12-09_16:11:14.118473) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:15.863554 run osmo-stp_10.42.42.5(pid=21076): stderr: | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161114310 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:16.011254 run osmo-stp_10.42.42.5(pid=21076): stdout: | (launched: 2022-12-09_16:11:14.118473) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:16.149221 run osmo-stp_10.42.42.5(pid=21076): stderr: | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161114309 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161114310 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161114310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:16.311013 run patchelf(pid=21079): Terminating (SIGINT) 16:11:16.500389 run patchelf(pid=21079): Terminated: ok {rc=0} 16:11:16.535702 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21076): Process ended prematurely: osmo-stp_10.42.42.5(pid=21076) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21076)] [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:11:16.546788 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 16:11:16.615025 run osmo-hlr_10.42.42.2(pid=21073): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21073)] 16:11:16.668690 run osmo-hlr_10.42.42.2(pid=21073): stdout: | (launched: 2022-12-09_16:11:13.091331) 16:11:16.723392 run osmo-hlr_10.42.42.2(pid=21073): stderr: | �[0;m�[1;31m20221209161113290 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209161113290 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209161113290 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209161113290 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209161113291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209161113291 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209161113302 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209161113311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209161113311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209161113311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:11:16.769124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21066): Terminating (SIGTERM) 16:11:16.815754 run iperf3-srv_10.42.42.10(pid=21067): Terminating (SIGTERM) 16:11:16.861405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21068): Terminating (SIGTERM) 16:11:16.906366 run iperf3-srv_10.42.42.10(pid=21069): Terminating (SIGTERM) 16:11:16.952050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21072): Terminating (SIGTERM) 16:11:16.994888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21075): Terminating (SIGTERM) 16:11:17.039996 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21078): Terminating (SIGTERM) 16:11:17.050452 --- ParallelTerminationStrategy: PID 21066 died... 16:11:17.109958 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21066): Terminated: ok {rc=0} 16:11:17.120815 --- ParallelTerminationStrategy: PID 21067 died... 16:11:17.180285 run iperf3-srv_10.42.42.10(pid=21067): Terminated {rc=256} 16:11:17.191298 --- ParallelTerminationStrategy: PID 21068 died... 16:11:17.247841 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21068): Terminated: ok {rc=0} 16:11:17.258047 --- ParallelTerminationStrategy: PID 21069 died... 16:11:17.314144 run iperf3-srv_10.42.42.10(pid=21069): Terminated {rc=256} 16:11:17.324225 --- ParallelTerminationStrategy: PID 21072 died... 16:11:17.380824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21072): Terminated: ok {rc=0} 16:11:17.390897 --- ParallelTerminationStrategy: PID 21075 died... 16:11:17.447276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21075): Terminated: ok {rc=0} 16:11:17.457455 --- ParallelTerminationStrategy: PID 21078 died... 16:11:17.513977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21078): Terminated: ok {rc=0} 16:11:17.602098 bus /gobi_0: Setting Powered False 16:11:18.707660 bus /gobi_0: Setting Powered False 16:11:19.815869 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21076): Process ended prematurely: osmo-stp_10.42.42.5(pid=21076) [trial-2361↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21076)]