Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21652): Process ended prematurely: osmo-stp_10.42.42.5(pid=21652) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21652)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:19:27.571662 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:27.583385 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:19:27.751348 tst cs_paging_gprs_active.py: using LAC 22239 16:19:27.879058 tst cs_paging_gprs_active.py: using RAC 54 16:19:28.006610 tst cs_paging_gprs_active.py: using CellId 22239 16:19:28.139459 tst cs_paging_gprs_active.py: using BVCI 22240 16:19:28.164373 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.175817 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.187129 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.199198 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.211002 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.223283 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.235381 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.247338 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:19:28.258880 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:19:28.378233 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:19:28.666390 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:19:28.795810 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:19:29.117627 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21642): Launched 16:19:29.386495 run iperf3-srv_10.42.42.10(pid=21643): Launched 16:19:29.576587 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:19:29.705829 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:19:30.027927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21644): Launched 16:19:30.293807 run iperf3-srv_10.42.42.10(pid=21645): Launched 16:19:30.481911 tst cs_paging_gprs_active.py:38: start network... 16:19:30.610349 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:19:31.151723 run create_hlr_db(pid=21646): Launched 16:19:31.333443 bus /gobi_6: Setting Powered False 16:19:32.353293 run create_hlr_db(pid=21646): Terminated: ok {rc=0} 16:19:32.793121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21648): Launched 16:19:33.121701 run osmo-hlr_10.42.42.2(pid=21649): Launched 16:19:33.243539 run osmo-stp_10.42.42.5: Starting osmo-stp 16:19:33.816143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21651): Launched 16:19:34.145143 run osmo-stp_10.42.42.5(pid=21652): Launched 16:19:34.264523 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:19:34.839606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21654): Launched 16:19:34.957052 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:19:35.246803 run patchelf(pid=21655): Launched 16:19:35.439447 run osmo-stp_10.42.42.5(pid=21652): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21652)] 16:19:35.580240 run osmo-stp_10.42.42.5(pid=21652): stdout: | (launched: 2022-12-09_16:19:33.982484) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:35.721089 run osmo-stp_10.42.42.5(pid=21652): stderr: | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161934176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:35.856868 run osmo-stp_10.42.42.5(pid=21652): stdout: | (launched: 2022-12-09_16:19:33.982484) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:35.991232 run osmo-stp_10.42.42.5(pid=21652): stderr: | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161934175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161934176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161934176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:36.148278 run patchelf(pid=21655): Terminating (SIGINT) 16:19:36.332833 run patchelf(pid=21655): Terminated: ok {rc=0} 16:19:36.367069 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21652): Process ended prematurely: osmo-stp_10.42.42.5(pid=21652) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21652)] [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:19:36.376900 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 16:19:36.440673 run osmo-hlr_10.42.42.2(pid=21649): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21649)] 16:19:36.492609 run osmo-hlr_10.42.42.2(pid=21649): stdout: | (launched: 2022-12-09_16:19:32.959855) 16:19:36.544990 run osmo-hlr_10.42.42.2(pid=21649): stderr: | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209161933162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209161933178 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209161933187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209161933188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209161933188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:19:36.589768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21642): Terminating (SIGTERM) 16:19:36.631558 run iperf3-srv_10.42.42.10(pid=21643): Terminating (SIGTERM) 16:19:36.673995 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21644): Terminating (SIGTERM) 16:19:36.716018 run iperf3-srv_10.42.42.10(pid=21645): Terminating (SIGTERM) 16:19:36.758743 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21648): Terminating (SIGTERM) 16:19:36.801043 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21651): Terminating (SIGTERM) 16:19:36.842752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21654): Terminating (SIGTERM) 16:19:36.852869 --- ParallelTerminationStrategy: PID 21642 died... 16:19:36.909605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21642): Terminated: ok {rc=0} 16:19:36.919740 --- ParallelTerminationStrategy: PID 21643 died... 16:19:36.975593 run iperf3-srv_10.42.42.10(pid=21643): Terminated {rc=256} 16:19:36.986148 --- ParallelTerminationStrategy: PID 21644 died... 16:19:37.042308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21644): Terminated: ok {rc=0} 16:19:37.052269 --- ParallelTerminationStrategy: PID 21645 died... 16:19:37.108259 run iperf3-srv_10.42.42.10(pid=21645): Terminated {rc=256} 16:19:37.118193 --- ParallelTerminationStrategy: PID 21648 died... 16:19:37.174322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21648): Terminated: ok {rc=0} 16:19:37.184345 --- ParallelTerminationStrategy: PID 21651 died... 16:19:37.240198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21651): Terminated: ok {rc=0} 16:19:37.250320 --- ParallelTerminationStrategy: PID 21654 died... 16:19:37.305900 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21654): Terminated: ok {rc=0} 16:19:37.393054 bus /gobi_0: Setting Powered False 16:19:38.500922 bus /gobi_0: Setting Powered False 16:19:39.608821 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21652): Process ended prematurely: osmo-stp_10.42.42.5(pid=21652) [trial-2361↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21652)]