Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21515): Process ended prematurely: osmo-stp_10.42.42.5(pid=21515) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21515)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:17:25.916092 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:25.927663 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:17:26.074190 tst cs_paging_gprs_active.py: using LAC 22229 16:17:26.200160 tst cs_paging_gprs_active.py: using RAC 44 16:17:26.323748 tst cs_paging_gprs_active.py: using CellId 22229 16:17:26.454122 tst cs_paging_gprs_active.py: using BVCI 22230 16:17:26.479665 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.491346 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.502806 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.514517 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.526067 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.537614 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.550236 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.561620 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:26.574295 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:17:26.697083 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:17:26.986265 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:17:27.117093 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:17:27.443187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21505): Launched 16:17:27.715401 run iperf3-srv_10.42.42.10(pid=21506): Launched 16:17:27.906597 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:17:28.037105 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:17:28.361975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21507): Launched 16:17:28.632203 run iperf3-srv_10.42.42.10(pid=21508): Launched 16:17:28.822261 tst cs_paging_gprs_active.py:38: start network... 16:17:28.951816 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:17:29.453447 run create_hlr_db(pid=21509): Launched 16:17:29.632738 bus /gobi_6: Setting Powered False 16:17:30.653414 run create_hlr_db(pid=21509): Terminated: ok {rc=0} 16:17:31.144472 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21511): Launched 16:17:31.587348 run osmo-hlr_10.42.42.2(pid=21512): Launched 16:17:31.828755 run osmo-stp_10.42.42.5: Starting osmo-stp 16:17:32.499430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21514): Launched 16:17:32.812182 run osmo-stp_10.42.42.5(pid=21515): Launched 16:17:32.924492 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:17:33.468896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21517): Launched 16:17:33.579967 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:17:33.851979 run patchelf(pid=21518): Launched 16:17:34.036276 run osmo-stp_10.42.42.5(pid=21515): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21515)] 16:17:34.169648 run osmo-stp_10.42.42.5(pid=21515): stdout: | (launched: 2022-12-09_16:17:32.658989) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:17:34.302991 run osmo-stp_10.42.42.5(pid=21515): stderr: | �[0;m�[38;5;43m20221209161732832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161732833 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161732833 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161732833 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:17:34.431568 run osmo-stp_10.42.42.5(pid=21515): stdout: | (launched: 2022-12-09_16:17:32.658989) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:17:34.558555 run osmo-stp_10.42.42.5(pid=21515): stderr: | �[0;m�[38;5;43m20221209161732832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209161732833 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209161732833 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209161732833 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209161732834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:17:34.708203 run patchelf(pid=21518): Terminating (SIGINT) 16:17:34.883302 run patchelf(pid=21518): Terminated: ok {rc=0} 16:17:34.915243 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21515): Process ended prematurely: osmo-stp_10.42.42.5(pid=21515) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21515)] [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:17:34.924339 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:17:34.985092 run osmo-hlr_10.42.42.2(pid=21512): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21512)] 16:17:35.034848 run osmo-hlr_10.42.42.2(pid=21512): stdout: | (launched: 2022-12-09_16:17:31.329145) 16:17:35.084728 run osmo-hlr_10.42.42.2(pid=21512): stderr: | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209161731634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209161731647 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209161731659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209161731660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209161731660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:17:35.127131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21505): Terminating (SIGTERM) 16:17:35.167102 run iperf3-srv_10.42.42.10(pid=21506): Terminating (SIGTERM) 16:17:35.207046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21507): Terminating (SIGTERM) 16:17:35.247015 run iperf3-srv_10.42.42.10(pid=21508): Terminating (SIGTERM) 16:17:35.287077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21511): Terminating (SIGTERM) 16:17:35.327081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21514): Terminating (SIGTERM) 16:17:35.366988 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21517): Terminating (SIGTERM) 16:17:35.376311 --- ParallelTerminationStrategy: PID 21505 died... 16:17:35.429660 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21505): Terminated: ok {rc=0} 16:17:35.439267 --- ParallelTerminationStrategy: PID 21506 died... 16:17:35.492220 run iperf3-srv_10.42.42.10(pid=21506): Terminated {rc=256} 16:17:35.501851 --- ParallelTerminationStrategy: PID 21507 died... 16:17:35.554806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21507): Terminated: ok {rc=0} 16:17:35.564401 --- ParallelTerminationStrategy: PID 21508 died... 16:17:35.617327 run iperf3-srv_10.42.42.10(pid=21508): Terminated {rc=256} 16:17:35.626890 --- ParallelTerminationStrategy: PID 21511 died... 16:17:35.680011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21511): Terminated: ok {rc=0} 16:17:35.689700 --- ParallelTerminationStrategy: PID 21514 died... 16:17:35.742618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21514): Terminated: ok {rc=0} 16:17:35.752187 --- ParallelTerminationStrategy: PID 21517 died... 16:17:35.805048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21517): Terminated: ok {rc=0} 16:17:35.896444 bus /gobi_0: Setting Powered False 16:17:37.000049 bus /gobi_0: Setting Powered False 16:17:38.112552 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21515): Process ended prematurely: osmo-stp_10.42.42.5(pid=21515) [trial-2361↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21515)]