Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=21730): Process ended prematurely: osmo-stp_10.42.42.5(pid=21730) [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21730)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:20:28.147014 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.158447 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:20:28.297591 tst cs_paging_gprs_active.py: using LAC 22244 16:20:28.416712 tst cs_paging_gprs_active.py: using RAC 59 16:20:28.544823 tst cs_paging_gprs_active.py: using CellId 22244 16:20:28.672895 tst cs_paging_gprs_active.py: using BVCI 22245 16:20:28.698205 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.710484 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.722305 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.734620 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.746632 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.758225 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.770238 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.781975 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.794931 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:20:28.915514 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:20:29.200208 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:20:29.328627 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:20:29.649674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21720): Launched 16:20:29.916696 run iperf3-srv_10.42.42.10(pid=21721): Launched 16:20:30.104380 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:20:30.231826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:20:30.551240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21722): Launched 16:20:30.816305 run iperf3-srv_10.42.42.10(pid=21723): Launched 16:20:31.007182 tst cs_paging_gprs_active.py:38: start network... 16:20:31.137945 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:20:31.674898 run create_hlr_db(pid=21724): Launched 16:20:31.856177 bus /gobi_6: Setting Powered False 16:20:32.885032 run create_hlr_db(pid=21724): Terminated: ok {rc=0} 16:20:33.327862 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21726): Launched 16:20:33.661844 run osmo-hlr_10.42.42.2(pid=21727): Launched 16:20:33.783776 run osmo-stp_10.42.42.5: Starting osmo-stp 16:20:34.355274 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21729): Launched 16:20:34.685562 run osmo-stp_10.42.42.5(pid=21730): Launched 16:20:34.805369 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:20:35.378465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21732): Launched 16:20:35.496646 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:20:35.786291 run patchelf(pid=21733): Launched 16:20:35.979213 run osmo-stp_10.42.42.5(pid=21730): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21730)] 16:20:36.120286 run osmo-stp_10.42.42.5(pid=21730): stdout: | (launched: 2022-12-09_16:20:34.523359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:36.261174 run osmo-stp_10.42.42.5(pid=21730): stderr: | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209162034719 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:36.397125 run osmo-stp_10.42.42.5(pid=21730): stdout: | (launched: 2022-12-09_16:20:34.523359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:36.532203 run osmo-stp_10.42.42.5(pid=21730): stderr: | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209162034718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209162034719 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209162034719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:36.689363 run patchelf(pid=21733): Terminating (SIGINT) 16:20:36.873776 run patchelf(pid=21733): Terminated: ok {rc=0} 16:20:36.907532 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21730): Process ended prematurely: osmo-stp_10.42.42.5(pid=21730) [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21730)] [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:20:36.917617 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 16:20:36.981929 run osmo-hlr_10.42.42.2(pid=21727): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21727)] 16:20:37.033295 run osmo-hlr_10.42.42.2(pid=21727): stdout: | (launched: 2022-12-09_16:20:33.496561) 16:20:37.086241 run osmo-hlr_10.42.42.2(pid=21727): stderr: | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209162033697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209162033722 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209162033731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209162033731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209162033731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:20:37.130883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21720): Terminating (SIGTERM) 16:20:37.173053 run iperf3-srv_10.42.42.10(pid=21721): Terminating (SIGTERM) 16:20:37.214931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21722): Terminating (SIGTERM) 16:20:37.256928 run iperf3-srv_10.42.42.10(pid=21723): Terminating (SIGTERM) 16:20:37.299148 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21726): Terminating (SIGTERM) 16:20:37.341670 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21729): Terminating (SIGTERM) 16:20:37.383773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21732): Terminating (SIGTERM) 16:20:37.393473 --- ParallelTerminationStrategy: PID 21720 died... 16:20:37.449556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21720): Terminated: ok {rc=0} 16:20:37.459943 --- ParallelTerminationStrategy: PID 21721 died... 16:20:37.516110 run iperf3-srv_10.42.42.10(pid=21721): Terminated {rc=256} 16:20:37.526487 --- ParallelTerminationStrategy: PID 21722 died... 16:20:37.582726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21722): Terminated: ok {rc=0} 16:20:37.592734 --- ParallelTerminationStrategy: PID 21723 died... 16:20:37.648253 run iperf3-srv_10.42.42.10(pid=21723): Terminated {rc=256} 16:20:37.658471 --- ParallelTerminationStrategy: PID 21726 died... 16:20:37.714344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21726): Terminated: ok {rc=0} 16:20:37.724426 --- ParallelTerminationStrategy: PID 21729 died... 16:20:37.780091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21729): Terminated: ok {rc=0} 16:20:37.790526 --- ParallelTerminationStrategy: PID 21732 died... 16:20:37.846063 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21732): Terminated: ok {rc=0} 16:20:37.933268 bus /gobi_0: Setting Powered False 16:20:39.038488 bus /gobi_0: Setting Powered False 16:20:40.145994 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21730): Process ended prematurely: osmo-stp_10.42.42.5(pid=21730) [trial-2361↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21730)]