Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=8356): Process ended prematurely: osmo-stp_10.42.42.5(pid=8356) [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8356)]
Standard Output
---------------------------------------------- trial-2363 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 19:46:57.422700 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:57.433963 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 19:46:57.575407 tst cs_paging_gprs_active.py: using LAC 23306 19:46:57.702906 tst cs_paging_gprs_active.py: using RAC 101 19:46:57.830277 tst cs_paging_gprs_active.py: using CellId 23306 19:46:57.959176 tst cs_paging_gprs_active.py: using BVCI 23307 19:46:57.984429 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:57.995627 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.006637 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.018134 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.029483 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.040627 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.052241 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.063550 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:46:58.075535 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 19:46:58.194855 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 19:46:58.478976 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:46:58.607874 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:46:58.926860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8346): Launched 19:46:59.191166 run iperf3-srv_10.42.42.10(pid=8347): Launched 19:46:59.379188 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:46:59.507908 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:46:59.826538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8348): Launched 19:47:00.090628 run iperf3-srv_10.42.42.10(pid=8349): Launched 19:47:00.278156 tst cs_paging_gprs_active.py:38: start network... 19:47:00.406713 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:47:00.932575 run create_hlr_db(pid=8350): Launched 19:47:01.118366 bus /sierra_2: Setting Powered False 19:47:02.155327 run create_hlr_db(pid=8350): Terminated: ok {rc=0} 19:47:02.596917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8352): Launched 19:47:02.930263 run osmo-hlr_10.42.42.2(pid=8353): Launched 19:47:03.049395 run osmo-stp_10.42.42.5: Starting osmo-stp 19:47:03.623658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8355): Launched 19:47:03.954861 run osmo-stp_10.42.42.5(pid=8356): Launched 19:47:04.075226 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:47:04.650584 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8358): Launched 19:47:04.769311 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:47:05.058219 run patchelf(pid=8359): Launched 19:47:05.251064 run osmo-stp_10.42.42.5(pid=8356): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8356)] 19:47:05.391686 run osmo-stp_10.42.42.5(pid=8356): stdout: | (launched: 2022-12-09_19:47:03.791667) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:47:05.532057 run osmo-stp_10.42.42.5(pid=8356): stderr: | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209194703988 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:47:05.667921 run osmo-stp_10.42.42.5(pid=8356): stdout: | (launched: 2022-12-09_19:47:03.791667) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:47:05.803304 run osmo-stp_10.42.42.5(pid=8356): stderr: | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209194703987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209194703988 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209194703988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:47:05.960608 run patchelf(pid=8359): Terminating (SIGINT) 19:47:06.145566 run patchelf(pid=8359): Terminated: ok {rc=0} 19:47:06.179673 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8356): Process ended prematurely: osmo-stp_10.42.42.5(pid=8356) [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8356)] [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 19:47:06.189994 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:47:06.253316 run osmo-hlr_10.42.42.2(pid=8353): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8353)] 19:47:06.304376 run osmo-hlr_10.42.42.2(pid=8353): stdout: | (launched: 2022-12-09_19:47:02.765630) 19:47:06.356335 run osmo-hlr_10.42.42.2(pid=8353): stderr: | �[0;m�[1;31m20221209194702965 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209194702965 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209194702965 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209194702965 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209194702965 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209194702966 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209194702978 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209194702986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209194702987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209194702987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:47:06.400503 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8346): Terminating (SIGTERM) 19:47:06.445198 run iperf3-srv_10.42.42.10(pid=8347): Terminating (SIGTERM) 19:47:06.485221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8348): Terminating (SIGTERM) 19:47:06.524806 run iperf3-srv_10.42.42.10(pid=8349): Terminating (SIGTERM) 19:47:06.564439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8352): Terminating (SIGTERM) 19:47:06.604093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8355): Terminating (SIGTERM) 19:47:06.644067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8358): Terminating (SIGTERM) 19:47:06.653771 --- ParallelTerminationStrategy: PID 8346 died... 19:47:06.707648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8346): Terminated: ok {rc=0} 19:47:06.717440 --- ParallelTerminationStrategy: PID 8347 died... 19:47:06.770100 run iperf3-srv_10.42.42.10(pid=8347): Terminated {rc=256} 19:47:06.780150 --- ParallelTerminationStrategy: PID 8348 died... 19:47:06.833002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8348): Terminated: ok {rc=0} 19:47:06.843305 --- ParallelTerminationStrategy: PID 8349 died... 19:47:06.896198 run iperf3-srv_10.42.42.10(pid=8349): Terminated {rc=256} 19:47:06.906123 --- ParallelTerminationStrategy: PID 8352 died... 19:47:06.959302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8352): Terminated: ok {rc=0} 19:47:06.969526 --- ParallelTerminationStrategy: PID 8355 died... 19:47:07.023010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8355): Terminated: ok {rc=0} 19:47:07.032783 --- ParallelTerminationStrategy: PID 8358 died... 19:47:07.085881 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8358): Terminated: ok {rc=0} 19:47:07.174147 bus /gobi_0: Setting Powered False 19:47:08.277552 bus /gobi_0: Setting Powered False 19:47:09.388239 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8356): Process ended prematurely: osmo-stp_10.42.42.5(pid=8356) [trial-2363↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8356)]