Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3360): Process ended prematurely: osmo-stp_10.42.42.5(pid=3360) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3360)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 18:54:44.204935 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.216725 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:54:44.360929 tst ping_idle_ping.py: using LAC 23028 18:54:44.477813 tst ping_idle_ping.py: using RAC 78 18:54:44.599424 tst ping_idle_ping.py: using CellId 23028 18:54:44.716129 tst ping_idle_ping.py: using BVCI 23029 18:54:44.738923 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.749726 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.760212 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.770827 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.781267 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.791700 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.802350 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:54:44.812848 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:54:45.102668 tst ping_idle_ping.py:24: start network... 18:54:45.237608 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:45.748455 run create_hlr_db(pid=3354): Launched 18:54:45.962429 bus /gobi_6: Setting Powered False 18:54:46.946588 run create_hlr_db(pid=3354): Terminated: ok {rc=0} 18:54:47.392122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3356): Launched 18:54:47.692176 run osmo-hlr_10.42.42.2(pid=3357): Launched 18:54:47.801510 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:48.316704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3359): Launched 18:54:48.615182 run osmo-stp_10.42.42.5(pid=3360): Launched 18:54:48.723334 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:49.241455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3362): Launched 18:54:49.347108 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:49.607041 run patchelf(pid=3363): Launched 18:54:49.780384 run osmo-stp_10.42.42.5(pid=3360): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3360)] 18:54:49.907379 run osmo-stp_10.42.42.5(pid=3360): stdout: | (launched: 2022-12-09_18:54:48.468320) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:50.034392 run osmo-stp_10.42.42.5(pid=3360): stderr: | �[0;m�[38;5;43m20221209185448638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185448638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185448639 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185448639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:50.157178 run osmo-stp_10.42.42.5(pid=3360): stdout: | (launched: 2022-12-09_18:54:48.468320) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:50.278994 run osmo-stp_10.42.42.5(pid=3360): stderr: | �[0;m�[38;5;43m20221209185448638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185448638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185448639 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185448639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185448640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:50.420848 run patchelf(pid=3363): Terminating (SIGINT) 18:54:50.586855 run patchelf(pid=3363): Terminated: ok {rc=0} 18:54:50.617097 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3360): Process ended prematurely: osmo-stp_10.42.42.5(pid=3360) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3360)] [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 18:54:50.625736 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 18:54:50.683920 run osmo-hlr_10.42.42.2(pid=3357): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3357)] 18:54:50.731834 run osmo-hlr_10.42.42.2(pid=3357): stdout: | (launched: 2022-12-09_18:54:47.544658) 18:54:50.780173 run osmo-hlr_10.42.42.2(pid=3357): stderr: | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185447719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185447733 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185447742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185447742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185447742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:50.821606 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3356): Terminating (SIGTERM) 18:54:50.860342 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3359): Terminating (SIGTERM) 18:54:50.899061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3362): Terminating (SIGTERM) 18:54:50.907887 --- ParallelTerminationStrategy: PID 3356 died... 18:54:50.959731 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3356): Terminated: ok {rc=0} 18:54:50.969042 --- ParallelTerminationStrategy: PID 3359 died... 18:54:51.020390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3359): Terminated: ok {rc=0} 18:54:51.029731 --- ParallelTerminationStrategy: PID 3362 died... 18:54:51.081478 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3362): Terminated: ok {rc=0} 18:54:51.169558 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3360): Process ended prematurely: osmo-stp_10.42.42.5(pid=3360) [trial-2363↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3360)]