Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=2835): Process ended prematurely: osmo-stp_10.42.42.5(pid=2835) [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2835)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 18:50:55.218593 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.229755 tst gprs:oc2g: Using 1 x bts (candidates: 1) 18:50:55.354905 tst cs_paging_gprs_active.py: using LAC 23009 18:50:55.477909 tst cs_paging_gprs_active.py: using RAC 59 18:50:55.603293 tst cs_paging_gprs_active.py: using CellId 23009 18:50:55.730016 tst cs_paging_gprs_active.py: using BVCI 23010 18:50:55.754735 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.765493 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.776079 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.787098 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.797832 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.808529 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.819463 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.830326 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 18:50:55.841321 tst gprs:oc2g: Using 1 x modem (candidates: 4) 18:50:55.958414 tst gprs:oc2g: Using 1 x modem (candidates: 4) 18:50:56.252615 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:50:56.389007 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:50:56.724306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2825): Launched 18:50:57.002792 run iperf3-srv_10.42.42.10(pid=2826): Launched 18:50:57.202641 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:50:57.338442 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:50:57.673764 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2827): Launched 18:50:57.951418 run iperf3-srv_10.42.42.10(pid=2828): Launched 18:50:58.151057 tst cs_paging_gprs_active.py:38: start network... 18:50:58.286804 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:50:58.795276 run create_hlr_db(pid=2829): Launched 18:50:58.983037 bus /sierra_2: Setting Powered False 18:51:00.003670 run create_hlr_db(pid=2829): Terminated: ok {rc=0} 18:51:00.410797 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2831): Launched 18:51:00.713496 run osmo-hlr_10.42.42.2(pid=2832): Launched 18:51:00.846961 run osmo-stp_10.42.42.5: Starting osmo-stp 18:51:01.440872 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2834): Launched 18:51:01.833780 run osmo-stp_10.42.42.5(pid=2835): Launched 18:51:02.127783 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:51:02.727841 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2837): Launched 18:51:02.844317 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:51:03.127413 run patchelf(pid=2838): Launched 18:51:03.316778 run osmo-stp_10.42.42.5(pid=2835): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2835)] 18:51:03.455425 run osmo-stp_10.42.42.5(pid=2835): stdout: | (launched: 2022-12-09_18:51:01.596438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:51:03.594809 run osmo-stp_10.42.42.5(pid=2835): stderr: | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185101853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185101855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185101855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185101856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:51:03.729080 run osmo-stp_10.42.42.5(pid=2835): stdout: | (launched: 2022-12-09_18:51:01.596438) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:51:03.861648 run osmo-stp_10.42.42.5(pid=2835): stderr: | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185101852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185101853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185101855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185101855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185101856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:51:04.016311 run patchelf(pid=2838): Terminating (SIGINT) 18:51:04.198327 run patchelf(pid=2838): Terminated: ok {rc=0} 18:51:04.231343 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2835): Process ended prematurely: osmo-stp_10.42.42.5(pid=2835) [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2835)] [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py:38] 18:51:04.241080 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 18:51:04.304206 run osmo-hlr_10.42.42.2(pid=2832): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2832)] 18:51:04.355754 run osmo-hlr_10.42.42.2(pid=2832): stdout: | (launched: 2022-12-09_18:51:00.564564) 18:51:04.407589 run osmo-hlr_10.42.42.2(pid=2832): stderr: | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185100741 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185100754 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185100764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185100764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185100764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:51:04.451347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2825): Terminating (SIGTERM) 18:51:04.492665 run iperf3-srv_10.42.42.10(pid=2826): Terminating (SIGTERM) 18:51:04.534153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2827): Terminating (SIGTERM) 18:51:04.575289 run iperf3-srv_10.42.42.10(pid=2828): Terminating (SIGTERM) 18:51:04.616442 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2831): Terminating (SIGTERM) 18:51:04.657384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2834): Terminating (SIGTERM) 18:51:04.698342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2837): Terminating (SIGTERM) 18:51:04.708174 --- ParallelTerminationStrategy: PID 2825 died... 18:51:04.763718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2825): Terminated: ok {rc=0} 18:51:04.773806 --- ParallelTerminationStrategy: PID 2826 died... 18:51:04.828529 run iperf3-srv_10.42.42.10(pid=2826): Terminated {rc=256} 18:51:04.838312 --- ParallelTerminationStrategy: PID 2827 died... 18:51:04.893217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2827): Terminated: ok {rc=0} 18:51:04.903379 --- ParallelTerminationStrategy: PID 2828 died... 18:51:04.958013 run iperf3-srv_10.42.42.10(pid=2828): Terminated {rc=256} 18:51:04.968012 --- ParallelTerminationStrategy: PID 2831 died... 18:51:05.022630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2831): Terminated: ok {rc=0} 18:51:05.032706 --- ParallelTerminationStrategy: PID 2834 died... 18:51:05.087344 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2834): Terminated: ok {rc=0} 18:51:05.097704 --- ParallelTerminationStrategy: PID 2837 died... 18:51:05.152650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2837): Terminated: ok {rc=0} 18:51:05.237488 bus /gobi_0: Setting Powered False 18:51:06.342408 bus /gobi_0: Setting Powered False 18:51:07.447662 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2835): Process ended prematurely: osmo-stp_10.42.42.5(pid=2835) [trial-2363↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2835)]