Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6664): Process ended prematurely: osmo-stp_10.42.42.5(pid=6664) [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6664)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:26:40.691050 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:40.702441 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:26:40.848920 tst cs_paging_gprs_active.py: using LAC 23198 19:26:40.975566 tst cs_paging_gprs_active.py: using RAC 248 19:26:41.102756 tst cs_paging_gprs_active.py: using CellId 23198 19:26:41.229442 tst cs_paging_gprs_active.py: using BVCI 23199 19:26:41.254298 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.265509 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.276392 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.287939 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.300191 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.311355 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.323043 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.334580 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:26:41.346218 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:26:41.464754 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:26:41.743124 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:26:41.869805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:26:42.184120 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6654): Launched 19:26:42.444097 run iperf3-srv_10.42.42.10(pid=6655): Launched 19:26:42.629153 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:26:42.756482 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:26:43.071340 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6656): Launched 19:26:43.331997 run iperf3-srv_10.42.42.10(pid=6657): Launched 19:26:43.516188 tst cs_paging_gprs_active.py:38: start network... 19:26:43.641941 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:26:44.128071 run create_hlr_db(pid=6658): Launched 19:26:44.302923 bus /gobi_6: Setting Powered False 19:26:45.323423 run create_hlr_db(pid=6658): Terminated: ok {rc=0} 19:26:45.751692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6660): Launched 19:26:46.195129 run osmo-hlr_10.42.42.2(pid=6661): Launched 19:26:46.423555 run osmo-stp_10.42.42.5: Starting osmo-stp 19:26:47.088773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6663): Launched 19:26:47.417089 run osmo-stp_10.42.42.5(pid=6664): Launched 19:26:47.535914 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:26:48.102673 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6666): Launched 19:26:48.218718 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:26:48.500715 run patchelf(pid=6667): Launched 19:26:48.692140 run osmo-stp_10.42.42.5(pid=6664): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6664)] 19:26:48.831074 run osmo-stp_10.42.42.5(pid=6664): stdout: | (launched: 2022-12-09_19:26:47.255756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:26:48.970167 run osmo-stp_10.42.42.5(pid=6664): stderr: | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192647445 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:26:49.105236 run osmo-stp_10.42.42.5(pid=6664): stdout: | (launched: 2022-12-09_19:26:47.255756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:26:49.238446 run osmo-stp_10.42.42.5(pid=6664): stderr: | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192647444 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192647445 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192647445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:26:49.393688 run patchelf(pid=6667): Terminating (SIGINT) 19:26:49.575236 run patchelf(pid=6667): Terminated: ok {rc=0} 19:26:49.608780 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6664): Process ended prematurely: osmo-stp_10.42.42.5(pid=6664) [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6664)] [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:26:49.619033 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 19:26:49.682184 run osmo-hlr_10.42.42.2(pid=6661): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6661)] 19:26:49.732938 run osmo-hlr_10.42.42.2(pid=6661): stdout: | (launched: 2022-12-09_19:26:45.943175) 19:26:49.784326 run osmo-hlr_10.42.42.2(pid=6661): stderr: | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209192646288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209192646313 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209192646325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209192646325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209192646326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:26:49.828650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6654): Terminating (SIGTERM) 19:26:49.869777 run iperf3-srv_10.42.42.10(pid=6655): Terminating (SIGTERM) 19:26:49.911396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6656): Terminating (SIGTERM) 19:26:49.953203 run iperf3-srv_10.42.42.10(pid=6657): Terminating (SIGTERM) 19:26:49.994458 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6660): Terminating (SIGTERM) 19:26:50.035990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6663): Terminating (SIGTERM) 19:26:50.077535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6666): Terminating (SIGTERM) 19:26:50.087490 --- ParallelTerminationStrategy: PID 6654 died... 19:26:50.143164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6654): Terminated: ok {rc=0} 19:26:50.153256 --- ParallelTerminationStrategy: PID 6655 died... 19:26:50.208305 run iperf3-srv_10.42.42.10(pid=6655): Terminated {rc=256} 19:26:50.218730 --- ParallelTerminationStrategy: PID 6656 died... 19:26:50.273675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6656): Terminated: ok {rc=0} 19:26:50.284127 --- ParallelTerminationStrategy: PID 6657 died... 19:26:50.339276 run iperf3-srv_10.42.42.10(pid=6657): Terminated {rc=256} 19:26:50.349376 --- ParallelTerminationStrategy: PID 6660 died... 19:26:50.404619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6660): Terminated: ok {rc=0} 19:26:50.414936 --- ParallelTerminationStrategy: PID 6663 died... 19:26:50.470025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6663): Terminated: ok {rc=0} 19:26:50.480566 --- ParallelTerminationStrategy: PID 6666 died... 19:26:50.535241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6666): Terminated: ok {rc=0} 19:26:50.621000 bus /gobi_0: Setting Powered False 19:26:51.726767 bus /gobi_0: Setting Powered False 19:26:52.832691 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6664): Process ended prematurely: osmo-stp_10.42.42.5(pid=6664) [trial-2363↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6664)]