Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5268): Process ended prematurely: osmo-stp_10.42.42.5(pid=5268) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5268)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:10:29.834818 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:29.846427 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:10:30.014866 tst cs_paging_gprs_active.py: using LAC 23112 19:10:30.144484 tst cs_paging_gprs_active.py: using RAC 162 19:10:30.268616 tst cs_paging_gprs_active.py: using CellId 23112 19:10:30.389649 tst cs_paging_gprs_active.py: using BVCI 23113 19:10:30.413135 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.423909 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.434699 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.445421 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.455998 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.466690 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.477528 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.488129 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:10:30.498952 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:10:30.620093 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:10:30.927643 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:10:31.071351 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:10:31.409474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5258): Launched 19:10:31.704891 run iperf3-srv_10.42.42.10(pid=5259): Launched 19:10:31.897256 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:10:32.029826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:10:32.367430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5260): Launched 19:10:32.646608 run iperf3-srv_10.42.42.10(pid=5261): Launched 19:10:32.834211 tst cs_paging_gprs_active.py:38: start network... 19:10:32.962614 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:10:33.455412 run create_hlr_db(pid=5262): Launched 19:10:33.632827 bus /gobi_6: Setting Powered False 19:10:34.654797 run create_hlr_db(pid=5262): Terminated: ok {rc=0} 19:10:35.062642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5264): Launched 19:10:35.368615 run osmo-hlr_10.42.42.2(pid=5265): Launched 19:10:35.487370 run osmo-stp_10.42.42.5: Starting osmo-stp 19:10:36.025726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5267): Launched 19:10:36.333543 run osmo-stp_10.42.42.5(pid=5268): Launched 19:10:36.443848 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:10:36.977946 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5270): Launched 19:10:37.087046 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:10:37.354046 run patchelf(pid=5271): Launched 19:10:37.532516 run osmo-stp_10.42.42.5(pid=5268): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5268)] 19:10:37.662931 run osmo-stp_10.42.42.5(pid=5268): stdout: | (launched: 2022-12-09_19:10:36.181389) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:10:37.794018 run osmo-stp_10.42.42.5(pid=5268): stderr: | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191036355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:10:37.920436 run osmo-stp_10.42.42.5(pid=5268): stdout: | (launched: 2022-12-09_19:10:36.181389) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:10:38.045816 run osmo-stp_10.42.42.5(pid=5268): stderr: | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191036354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191036355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:10:38.191629 run patchelf(pid=5271): Terminating (SIGINT) 19:10:38.363462 run patchelf(pid=5271): Terminated: ok {rc=0} 19:10:38.394956 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5268): Process ended prematurely: osmo-stp_10.42.42.5(pid=5268) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5268)] [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:10:38.404222 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:10:38.462956 run osmo-hlr_10.42.42.2(pid=5265): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5265)] 19:10:38.510926 run osmo-hlr_10.42.42.2(pid=5265): stdout: | (launched: 2022-12-09_19:10:35.218591) 19:10:38.559554 run osmo-hlr_10.42.42.2(pid=5265): stderr: | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209191035396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209191035409 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209191035418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209191035418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209191035418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:10:38.600823 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5258): Terminating (SIGTERM) 19:10:38.639564 run iperf3-srv_10.42.42.10(pid=5259): Terminating (SIGTERM) 19:10:38.678353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5260): Terminating (SIGTERM) 19:10:38.717083 run iperf3-srv_10.42.42.10(pid=5261): Terminating (SIGTERM) 19:10:38.755814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5264): Terminating (SIGTERM) 19:10:38.794533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5267): Terminating (SIGTERM) 19:10:38.833414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5270): Terminating (SIGTERM) 19:10:38.842394 --- ParallelTerminationStrategy: PID 5258 died... 19:10:38.894493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5258): Terminated: ok {rc=0} 19:10:38.903738 --- ParallelTerminationStrategy: PID 5259 died... 19:10:38.955260 run iperf3-srv_10.42.42.10(pid=5259): Terminated {rc=256} 19:10:38.964590 --- ParallelTerminationStrategy: PID 5260 died... 19:10:39.016752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5260): Terminated: ok {rc=0} 19:10:39.026113 --- ParallelTerminationStrategy: PID 5261 died... 19:10:39.077692 run iperf3-srv_10.42.42.10(pid=5261): Terminated {rc=256} 19:10:39.086922 --- ParallelTerminationStrategy: PID 5264 died... 19:10:39.138648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5264): Terminated: ok {rc=0} 19:10:39.147947 --- ParallelTerminationStrategy: PID 5267 died... 19:10:39.199521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5267): Terminated: ok {rc=0} 19:10:39.208810 --- ParallelTerminationStrategy: PID 5270 died... 19:10:39.260423 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5270): Terminated: ok {rc=0} 19:10:39.342343 bus /gobi_0: Setting Powered False 19:10:40.448658 bus /gobi_0: Setting Powered False 19:10:41.555331 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5268): Process ended prematurely: osmo-stp_10.42.42.5(pid=5268) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5268)]