Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:19:46.679637 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:46.691685 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:19:46.881183 tst cs_paging_gprs_active.py: using LAC 23161 19:19:47.034325 tst cs_paging_gprs_active.py: using RAC 211 19:19:47.174499 tst cs_paging_gprs_active.py: using CellId 23161 19:19:47.305432 tst cs_paging_gprs_active.py: using BVCI 23162 19:19:47.330383 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.341688 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.352854 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.364850 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.376283 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.387930 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.399209 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.410376 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:19:47.421901 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:19:47.540362 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:19:47.839487 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:19:47.975804 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:19:48.310773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5898): Launched 19:19:48.589602 run iperf3-srv_10.42.42.10(pid=5899): Launched 19:19:48.788686 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:19:48.924930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:19:49.261906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Launched 19:19:49.542362 run iperf3-srv_10.42.42.10(pid=5901): Launched 19:19:49.741333 tst cs_paging_gprs_active.py:38: start network... 19:19:49.877502 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:19:50.392356 run create_hlr_db(pid=5902): Launched 19:19:50.567645 bus /gobi_6: Setting Powered False 19:19:51.588569 run create_hlr_db(pid=5902): Terminated: ok {rc=0} 19:19:52.020458 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Launched 19:19:52.348120 run osmo-hlr_10.42.42.2(pid=5905): Launched 19:19:52.466315 run osmo-stp_10.42.42.5: Starting osmo-stp 19:19:53.029627 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Launched 19:19:53.355780 run osmo-stp_10.42.42.5(pid=5908): Launched 19:19:53.473556 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:19:54.039991 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Launched 19:19:54.156046 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:19:54.441329 run patchelf(pid=5911): Launched 19:19:54.631042 run osmo-stp_10.42.42.5(pid=5908): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)] 19:19:54.769714 run osmo-stp_10.42.42.5(pid=5908): stdout: | (launched: 2022-12-09_19:19:53.195001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:19:54.909120 run osmo-stp_10.42.42.5(pid=5908): stderr: | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191953391 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:19:55.043900 run osmo-stp_10.42.42.5(pid=5908): stdout: | (launched: 2022-12-09_19:19:53.195001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:19:55.176880 run osmo-stp_10.42.42.5(pid=5908): stderr: | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191953390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191953391 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191953391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:19:55.331742 run patchelf(pid=5911): Terminating (SIGINT) 19:19:55.513991 run patchelf(pid=5911): Terminated: ok {rc=0} 19:19:55.547498 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)] [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:19:55.557608 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:19:55.620373 run osmo-hlr_10.42.42.2(pid=5905): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5905)] 19:19:55.671131 run osmo-hlr_10.42.42.2(pid=5905): stdout: | (launched: 2022-12-09_19:19:52.186136) 19:19:55.722638 run osmo-hlr_10.42.42.2(pid=5905): stderr: | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209191952383 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209191952396 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209191952404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209191952404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209191952404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:19:55.766650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5898): Terminating (SIGTERM) 19:19:55.807968 run iperf3-srv_10.42.42.10(pid=5899): Terminating (SIGTERM) 19:19:55.849130 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Terminating (SIGTERM) 19:19:55.890711 run iperf3-srv_10.42.42.10(pid=5901): Terminating (SIGTERM) 19:19:55.932330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Terminating (SIGTERM) 19:19:55.973606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Terminating (SIGTERM) 19:19:56.014780 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Terminating (SIGTERM) 19:19:56.024424 --- ParallelTerminationStrategy: PID 5898 died... 19:19:56.080116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5898): Terminated: ok {rc=0} 19:19:56.089990 --- ParallelTerminationStrategy: PID 5899 died... 19:19:56.145154 run iperf3-srv_10.42.42.10(pid=5899): Terminated {rc=256} 19:19:56.154986 --- ParallelTerminationStrategy: PID 5900 died... 19:19:56.210106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5900): Terminated: ok {rc=0} 19:19:56.219937 --- ParallelTerminationStrategy: PID 5901 died... 19:19:56.274812 run iperf3-srv_10.42.42.10(pid=5901): Terminated {rc=256} 19:19:56.284814 --- ParallelTerminationStrategy: PID 5904 died... 19:19:56.339648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5904): Terminated: ok {rc=0} 19:19:56.349763 --- ParallelTerminationStrategy: PID 5907 died... 19:19:56.404908 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5907): Terminated: ok {rc=0} 19:19:56.414741 --- ParallelTerminationStrategy: PID 5910 died... 19:19:56.469843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5910): Terminated: ok {rc=0} 19:19:56.556572 bus /gobi_0: Setting Powered False 19:19:57.662992 bus /gobi_0: Setting Powered False 19:19:58.773885 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5908): Process ended prematurely: osmo-stp_10.42.42.5(pid=5908) [trial-2363↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5908)]