Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=5980): Process ended prematurely: osmo-stp_10.42.42.5(pid=5980) [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5980)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:20:46.151236 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.166575 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:20:46.328463 tst cs_paging_gprs_active.py: using LAC 23166 19:20:46.463279 tst cs_paging_gprs_active.py: using RAC 216 19:20:46.587828 tst cs_paging_gprs_active.py: using CellId 23166 19:20:46.709611 tst cs_paging_gprs_active.py: using BVCI 23167 19:20:46.733786 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.745898 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.758129 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.770149 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.783173 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.795638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.807798 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.819772 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:20:46.832707 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:20:46.950496 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:20:47.266630 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:20:47.394856 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:20:47.711345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5970): Launched 19:20:47.973561 run iperf3-srv_10.42.42.10(pid=5971): Launched 19:20:48.159894 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:20:48.286291 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:20:48.602870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5972): Launched 19:20:48.863417 run iperf3-srv_10.42.42.10(pid=5973): Launched 19:20:49.048856 tst cs_paging_gprs_active.py:38: start network... 19:20:49.175688 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:20:49.663263 run create_hlr_db(pid=5974): Launched 19:20:49.839468 bus /gobi_6: Setting Powered False 19:20:50.860068 run create_hlr_db(pid=5974): Terminated: ok {rc=0} 19:20:51.292082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5976): Launched 19:20:51.618789 run osmo-hlr_10.42.42.2(pid=5977): Launched 19:20:51.742725 run osmo-stp_10.42.42.5: Starting osmo-stp 19:20:52.307993 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5979): Launched 19:20:52.634521 run osmo-stp_10.42.42.5(pid=5980): Launched 19:20:52.754966 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:20:53.323918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5982): Launched 19:20:53.440696 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:20:53.725718 run patchelf(pid=5983): Launched 19:20:53.916157 run osmo-stp_10.42.42.5(pid=5980): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5980)] 19:20:54.055263 run osmo-stp_10.42.42.5(pid=5980): stdout: | (launched: 2022-12-09_19:20:52.473522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:54.194913 run osmo-stp_10.42.42.5(pid=5980): stderr: | �[0;m�[38;5;43m20221209192052666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192052666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192052667 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192052667 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:54.329355 run osmo-stp_10.42.42.5(pid=5980): stdout: | (launched: 2022-12-09_19:20:52.473522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:54.462791 run osmo-stp_10.42.42.5(pid=5980): stderr: | �[0;m�[38;5;43m20221209192052666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209192052666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209192052667 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209192052667 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209192052668 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:54.618238 run patchelf(pid=5983): Terminating (SIGINT) 19:20:54.800207 run patchelf(pid=5983): Terminated: ok {rc=0} 19:20:54.833811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5980): Process ended prematurely: osmo-stp_10.42.42.5(pid=5980) [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5980)] [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:20:54.843805 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:20:54.907720 run osmo-hlr_10.42.42.2(pid=5977): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5977)] 19:20:54.959513 run osmo-hlr_10.42.42.2(pid=5977): stdout: | (launched: 2022-12-09_19:20:51.457619) 19:20:55.011703 run osmo-hlr_10.42.42.2(pid=5977): stderr: | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209192051659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209192051671 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209192051679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209192051679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209192051679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:20:55.055999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5970): Terminating (SIGTERM) 19:20:55.097632 run iperf3-srv_10.42.42.10(pid=5971): Terminating (SIGTERM) 19:20:55.139573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5972): Terminating (SIGTERM) 19:20:55.181433 run iperf3-srv_10.42.42.10(pid=5973): Terminating (SIGTERM) 19:20:55.223765 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5976): Terminating (SIGTERM) 19:20:55.265193 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5979): Terminating (SIGTERM) 19:20:55.307154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5982): Terminating (SIGTERM) 19:20:55.317093 --- ParallelTerminationStrategy: PID 5970 died... 19:20:55.372818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5970): Terminated: ok {rc=0} 19:20:55.383281 --- ParallelTerminationStrategy: PID 5971 died... 19:20:55.438900 run iperf3-srv_10.42.42.10(pid=5971): Terminated {rc=256} 19:20:55.448835 --- ParallelTerminationStrategy: PID 5972 died... 19:20:55.503853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5972): Terminated: ok {rc=0} 19:20:55.514287 --- ParallelTerminationStrategy: PID 5973 died... 19:20:55.569615 run iperf3-srv_10.42.42.10(pid=5973): Terminated {rc=256} 19:20:55.579908 --- ParallelTerminationStrategy: PID 5976 died... 19:20:55.635321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5976): Terminated: ok {rc=0} 19:20:55.645863 --- ParallelTerminationStrategy: PID 5979 died... 19:20:55.701034 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5979): Terminated: ok {rc=0} 19:20:55.711294 --- ParallelTerminationStrategy: PID 5982 died... 19:20:55.766373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5982): Terminated: ok {rc=0} 19:20:55.852538 bus /gobi_0: Setting Powered False 19:20:56.959550 bus /gobi_0: Setting Powered False 19:20:58.069635 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5980): Process ended prematurely: osmo-stp_10.42.42.5(pid=5980) [trial-2363↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5980)]