Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3842): Process ended prematurely: osmo-stp_10.42.42.5(pid=3842) [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3842)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:01:28.884628 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:28.895830 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:01:29.062103 tst cs_paging_gprs_active.py: using LAC 23065 19:01:29.191581 tst cs_paging_gprs_active.py: using RAC 115 19:01:29.321776 tst cs_paging_gprs_active.py: using CellId 23065 19:01:29.451432 tst cs_paging_gprs_active.py: using BVCI 23066 19:01:29.476570 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.487773 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.499817 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.511001 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.522877 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.533968 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.545568 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.557297 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:01:29.568424 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:01:29.687785 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:01:29.983302 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:01:30.121583 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:01:30.463049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3832): Launched 19:01:30.746616 run iperf3-srv_10.42.42.10(pid=3833): Launched 19:01:30.987165 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:01:31.137459 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:01:31.484787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3834): Launched 19:01:31.782143 run iperf3-srv_10.42.42.10(pid=3835): Launched 19:01:31.976280 tst cs_paging_gprs_active.py:38: start network... 19:01:32.109952 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:01:32.605806 run create_hlr_db(pid=3836): Launched 19:01:32.796776 bus /gobi_6: Setting Powered False 19:01:33.818110 run create_hlr_db(pid=3836): Terminated: ok {rc=0} 19:01:34.229959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3838): Launched 19:01:34.538587 run osmo-hlr_10.42.42.2(pid=3839): Launched 19:01:34.652231 run osmo-stp_10.42.42.5: Starting osmo-stp 19:01:35.187770 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3841): Launched 19:01:35.495882 run osmo-stp_10.42.42.5(pid=3842): Launched 19:01:35.612425 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:01:36.147835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3844): Launched 19:01:36.257453 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:01:36.525441 run patchelf(pid=3845): Launched 19:01:36.706237 run osmo-stp_10.42.42.5(pid=3842): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3842)] 19:01:36.838071 run osmo-stp_10.42.42.5(pid=3842): stdout: | (launched: 2022-12-09_19:01:35.344794) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:01:36.969984 run osmo-stp_10.42.42.5(pid=3842): stderr: | �[0;m�[38;5;43m20221209190135516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190135517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190135517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190135517 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:01:37.097430 run osmo-stp_10.42.42.5(pid=3842): stdout: | (launched: 2022-12-09_19:01:35.344794) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:01:37.223754 run osmo-stp_10.42.42.5(pid=3842): stderr: | �[0;m�[38;5;43m20221209190135516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190135517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190135517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190135517 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190135518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:01:37.370940 run patchelf(pid=3845): Terminating (SIGINT) 19:01:37.543525 run patchelf(pid=3845): Terminated: ok {rc=0} 19:01:37.575087 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3842): Process ended prematurely: osmo-stp_10.42.42.5(pid=3842) [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3842)] [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:01:37.584406 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:01:37.643934 run osmo-hlr_10.42.42.2(pid=3839): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3839)] 19:01:37.692631 run osmo-hlr_10.42.42.2(pid=3839): stdout: | (launched: 2022-12-09_19:01:34.386827) 19:01:37.741742 run osmo-hlr_10.42.42.2(pid=3839): stderr: | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209190134562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209190134574 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209190134582 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209190134582 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209190134582 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:01:37.783377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3832): Terminating (SIGTERM) 19:01:37.822659 run iperf3-srv_10.42.42.10(pid=3833): Terminating (SIGTERM) 19:01:37.861923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3834): Terminating (SIGTERM) 19:01:37.901097 run iperf3-srv_10.42.42.10(pid=3835): Terminating (SIGTERM) 19:01:37.940227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3838): Terminating (SIGTERM) 19:01:37.979306 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3841): Terminating (SIGTERM) 19:01:38.018587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3844): Terminating (SIGTERM) 19:01:38.027673 --- ParallelTerminationStrategy: PID 3832 died... 19:01:38.080348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3832): Terminated: ok {rc=0} 19:01:38.089936 --- ParallelTerminationStrategy: PID 3833 died... 19:01:38.142344 run iperf3-srv_10.42.42.10(pid=3833): Terminated {rc=256} 19:01:38.151715 --- ParallelTerminationStrategy: PID 3834 died... 19:01:38.204075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3834): Terminated: ok {rc=0} 19:01:38.213840 --- ParallelTerminationStrategy: PID 3835 died... 19:01:38.266024 run iperf3-srv_10.42.42.10(pid=3835): Terminated {rc=256} 19:01:38.275355 --- ParallelTerminationStrategy: PID 3838 died... 19:01:38.328041 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3838): Terminated: ok {rc=0} 19:01:38.337669 --- ParallelTerminationStrategy: PID 3841 died... 19:01:38.389956 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3841): Terminated: ok {rc=0} 19:01:38.399417 --- ParallelTerminationStrategy: PID 3844 died... 19:01:38.452170 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3844): Terminated: ok {rc=0} 19:01:38.541144 bus /gobi_0: Setting Powered False 19:01:39.645036 bus /gobi_0: Setting Powered False 19:01:40.752733 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3842): Process ended prematurely: osmo-stp_10.42.42.5(pid=3842) [trial-2363↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3842)]