Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=12917): Process ended prematurely: osmo-stp_10.42.42.5(pid=12917) [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12917)]
Standard Output
---------------------------------------------- trial-2364 dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 20:40:05.763660 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:05.775403 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 20:40:05.940768 tst switch_tch_pdch.py: using LAC 23583 20:40:06.066397 tst switch_tch_pdch.py: using RAC 123 20:40:06.188440 tst switch_tch_pdch.py: using CellId 23583 20:40:06.308252 tst switch_tch_pdch.py: using BVCI 23584 20:40:06.331261 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.342677 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.354141 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.365722 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.377489 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.389880 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.403099 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:40:06.414737 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:40:06.532068 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:40:06.823049 tst switch_tch_pdch.py:51: start network... 20:40:06.958352 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:40:07.475431 run create_hlr_db(pid=12911): Launched 20:40:07.663535 bus /gobi_6: Setting Powered False 20:40:08.683472 run create_hlr_db(pid=12911): Terminated: ok {rc=0} 20:40:09.111741 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12913): Launched 20:40:09.435559 run osmo-hlr_10.42.42.2(pid=12914): Launched 20:40:09.556479 run osmo-stp_10.42.42.5: Starting osmo-stp 20:40:10.115435 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12916): Launched 20:40:10.438682 run osmo-stp_10.42.42.5(pid=12917): Launched 20:40:10.556045 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:40:11.088396 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12919): Launched 20:40:11.195606 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:40:11.457645 run patchelf(pid=12920): Launched 20:40:11.633561 run osmo-stp_10.42.42.5(pid=12917): ERR: Terminated: ERROR {rc=1} [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12917)] 20:40:11.762403 run osmo-stp_10.42.42.5(pid=12917): stdout: | (launched: 2022-12-09_20:40:10.279208) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:11.891787 run osmo-stp_10.42.42.5(pid=12917): stderr: | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204010473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:12.016208 run osmo-stp_10.42.42.5(pid=12917): stdout: | (launched: 2022-12-09_20:40:10.279208) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:12.139563 run osmo-stp_10.42.42.5(pid=12917): stderr: | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204010473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204010473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204010474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:12.283259 run patchelf(pid=12920): Terminating (SIGINT) 20:40:12.451545 run patchelf(pid=12920): Terminated: ok {rc=0} 20:40:12.482416 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=12917): Process ended prematurely: osmo-stp_10.42.42.5(pid=12917) [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12917)] [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 20:40:12.491388 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 20:40:12.551743 run osmo-hlr_10.42.42.2(pid=12914): ERR: Terminated: ERROR {rc=237} [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12914)] 20:40:12.600852 run osmo-hlr_10.42.42.2(pid=12914): stdout: | (launched: 2022-12-09_20:40:09.276392) 20:40:12.650609 run osmo-hlr_10.42.42.2(pid=12914): stderr: | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209204009478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209204009491 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209204009499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209204009499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209204009499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:40:12.692505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12913): Terminating (SIGTERM) 20:40:12.732147 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12916): Terminating (SIGTERM) 20:40:12.771801 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12919): Terminating (SIGTERM) 20:40:12.782004 --- ParallelTerminationStrategy: PID 12913 died... 20:40:12.835225 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12913): Terminated: ok {rc=0} 20:40:12.844649 --- ParallelTerminationStrategy: PID 12916 died... 20:40:12.897185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12916): Terminated: ok {rc=0} 20:40:12.906971 --- ParallelTerminationStrategy: PID 12919 died... 20:40:12.959868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12919): Terminated: ok {rc=0} 20:40:13.043206 bus /gobi_0: Setting Powered False 20:40:14.150662 bus /gobi_0: Setting Powered False 20:40:15.257472 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12917): Process ended prematurely: osmo-stp_10.42.42.5(pid=12917) [trial-2364↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12917)]