Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11889): Process ended prematurely: osmo-stp_10.42.42.5(pid=11889) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11889)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:29:09.659915 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:09.670784 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:29:09.825606 tst cs_paging_gprs_active.py: using LAC 23526 20:29:09.944193 tst cs_paging_gprs_active.py: using RAC 66 20:29:10.064424 tst cs_paging_gprs_active.py: using CellId 23526 20:29:10.184445 tst cs_paging_gprs_active.py: using BVCI 23527 20:29:10.207730 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.218527 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.229216 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.240165 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.251101 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.262063 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.273250 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.284221 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:29:10.295397 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:29:10.412292 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:29:10.712050 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:29:10.850296 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:11.192316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11879): Launched 20:29:11.475035 run iperf3-srv_10.42.42.10(pid=11880): Launched 20:29:11.678180 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:29:11.816308 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:12.156538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11881): Launched 20:29:12.438390 run iperf3-srv_10.42.42.10(pid=11882): Launched 20:29:12.639486 tst cs_paging_gprs_active.py:38: start network... 20:29:12.777010 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:29:13.302029 run create_hlr_db(pid=11883): Launched 20:29:13.491762 bus /gobi_6: Setting Powered False 20:29:14.512733 run create_hlr_db(pid=11883): Terminated: ok {rc=0} 20:29:14.922808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11885): Launched 20:29:15.230760 run osmo-hlr_10.42.42.2(pid=11886): Launched 20:29:15.348483 run osmo-stp_10.42.42.5: Starting osmo-stp 20:29:15.884291 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11888): Launched 20:29:16.230431 run osmo-stp_10.42.42.5(pid=11889): Launched 20:29:16.504396 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:29:17.100485 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11891): Launched 20:29:17.213163 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:29:17.482864 run patchelf(pid=11892): Launched 20:29:17.662794 run osmo-stp_10.42.42.5(pid=11889): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11889)] 20:29:17.794260 run osmo-stp_10.42.42.5(pid=11889): stdout: | (launched: 2022-12-09_20:29:16.046576) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:17.925836 run osmo-stp_10.42.42.5(pid=11889): stderr: | �[0;m�[38;5;43m20221209202916374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202916375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202916377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202916379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202916381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202916383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202916383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:18.053455 run osmo-stp_10.42.42.5(pid=11889): stdout: | (launched: 2022-12-09_20:29:16.046576) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:18.179427 run osmo-stp_10.42.42.5(pid=11889): stderr: | �[0;m�[38;5;43m20221209202916374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202916375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202916377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202916379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202916381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202916383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202916383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:18.326270 run patchelf(pid=11892): Terminating (SIGINT) 20:29:18.499043 run patchelf(pid=11892): Terminated: ok {rc=0} 20:29:18.530715 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11889): Process ended prematurely: osmo-stp_10.42.42.5(pid=11889) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11889)] [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:29:18.540092 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 20:29:18.600824 run osmo-hlr_10.42.42.2(pid=11886): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11886)] 20:29:18.649744 run osmo-hlr_10.42.42.2(pid=11886): stdout: | (launched: 2022-12-09_20:29:15.079202) 20:29:18.699833 run osmo-hlr_10.42.42.2(pid=11886): stderr: | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202915255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202915268 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202915278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202915278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202915278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:29:18.741766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11879): Terminating (SIGTERM) 20:29:18.781694 run iperf3-srv_10.42.42.10(pid=11880): Terminating (SIGTERM) 20:29:18.821552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11881): Terminating (SIGTERM) 20:29:18.861369 run iperf3-srv_10.42.42.10(pid=11882): Terminating (SIGTERM) 20:29:18.901194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11885): Terminating (SIGTERM) 20:29:18.941149 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11888): Terminating (SIGTERM) 20:29:18.980863 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11891): Terminating (SIGTERM) 20:29:18.990427 --- ParallelTerminationStrategy: PID 11879 died... 20:29:19.043782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11879): Terminated: ok {rc=0} 20:29:19.053381 --- ParallelTerminationStrategy: PID 11880 died... 20:29:19.106075 run iperf3-srv_10.42.42.10(pid=11880): Terminated {rc=256} 20:29:19.115895 --- ParallelTerminationStrategy: PID 11881 died... 20:29:19.168429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11881): Terminated: ok {rc=0} 20:29:19.178193 --- ParallelTerminationStrategy: PID 11882 died... 20:29:19.230651 run iperf3-srv_10.42.42.10(pid=11882): Terminated {rc=256} 20:29:19.240204 --- ParallelTerminationStrategy: PID 11885 died... 20:29:19.293411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11885): Terminated: ok {rc=0} 20:29:19.303062 --- ParallelTerminationStrategy: PID 11888 died... 20:29:19.355863 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11888): Terminated: ok {rc=0} 20:29:19.365475 --- ParallelTerminationStrategy: PID 11891 died... 20:29:19.418951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11891): Terminated: ok {rc=0} 20:29:19.501894 bus /gobi_0: Setting Powered False 20:29:20.609675 bus /gobi_0: Setting Powered False 20:29:21.717091 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11889): Process ended prematurely: osmo-stp_10.42.42.5(pid=11889) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11889)]