Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=15518): Process ended prematurely: osmo-stp_10.42.42.5(pid=15518) [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15518)]
Standard Output
---------------------------------------------- trial-2364 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 21:09:01.288193 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.300791 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 21:09:01.461505 tst ping_idle_ping.py: using LAC 23738 21:09:01.593626 tst ping_idle_ping.py: using RAC 23 21:09:01.745574 tst ping_idle_ping.py: using CellId 23738 21:09:01.882257 tst ping_idle_ping.py: using BVCI 23739 21:09:01.908022 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.919867 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.931821 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.944862 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.956436 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.968575 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.981671 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:09:01.994017 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:09:02.276073 tst ping_idle_ping.py:24: start network... 21:09:02.400836 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:09:02.876316 run create_hlr_db(pid=15512): Launched 21:09:03.048241 bus /gobi_6: Setting Powered False 21:09:04.070689 run create_hlr_db(pid=15512): Terminated: ok {rc=0} 21:09:04.498298 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15514): Launched 21:09:04.820457 run osmo-hlr_10.42.42.2(pid=15515): Launched 21:09:04.938236 run osmo-stp_10.42.42.5: Starting osmo-stp 21:09:05.497308 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15517): Launched 21:09:05.818777 run osmo-stp_10.42.42.5(pid=15518): Launched 21:09:05.935520 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:09:06.496391 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15520): Launched 21:09:06.611101 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:09:06.892558 run patchelf(pid=15521): Launched 21:09:07.080781 run osmo-stp_10.42.42.5(pid=15518): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15518)] 21:09:07.219096 run osmo-stp_10.42.42.5(pid=15518): stdout: | (launched: 2022-12-09_21:09:05.660735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:07.357254 run osmo-stp_10.42.42.5(pid=15518): stderr: | �[0;m�[38;5;43m20221209210905851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210905851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210905852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210905852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210905854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210905855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210905855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:07.490787 run osmo-stp_10.42.42.5(pid=15518): stdout: | (launched: 2022-12-09_21:09:05.660735) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:07.622937 run osmo-stp_10.42.42.5(pid=15518): stderr: | �[0;m�[38;5;43m20221209210905851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210905851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210905852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210905852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210905854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210905855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210905855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:07.777395 run patchelf(pid=15521): Terminating (SIGINT) 21:09:07.957215 run patchelf(pid=15521): Terminated: ok {rc=0} 21:09:07.989901 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15518): Process ended prematurely: osmo-stp_10.42.42.5(pid=15518) [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15518)] [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 21:09:07.999352 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 21:09:08.062046 run osmo-hlr_10.42.42.2(pid=15515): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15515)] 21:09:08.113107 run osmo-hlr_10.42.42.2(pid=15515): stdout: | (launched: 2022-12-09_21:09:04.661901) 21:09:08.164897 run osmo-hlr_10.42.42.2(pid=15515): stderr: | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209210904863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209210904877 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209210904887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209210904887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209210904887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:09:08.208819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15514): Terminating (SIGTERM) 21:09:08.250407 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15517): Terminating (SIGTERM) 21:09:08.292121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15520): Terminating (SIGTERM) 21:09:08.301916 --- ParallelTerminationStrategy: PID 15514 died... 21:09:08.357791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15514): Terminated: ok {rc=0} 21:09:08.368005 --- ParallelTerminationStrategy: PID 15517 died... 21:09:08.423433 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15517): Terminated: ok {rc=0} 21:09:08.433932 --- ParallelTerminationStrategy: PID 15520 died... 21:09:08.489476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15520): Terminated: ok {rc=0} 21:09:08.576109 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15518): Process ended prematurely: osmo-stp_10.42.42.5(pid=15518) [trial-2364↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15518)]