Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13288): Process ended prematurely: osmo-stp_10.42.42.5(pid=13288) [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13288)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:45:16.686335 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:16.698279 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:45:16.857775 tst cs_paging_gprs_active.py: using LAC 23612 20:45:17.009839 tst cs_paging_gprs_active.py: using RAC 152 20:45:17.160808 tst cs_paging_gprs_active.py: using CellId 23612 20:45:17.297981 tst cs_paging_gprs_active.py: using BVCI 23613 20:45:17.324868 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.336701 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.348188 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.359315 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.370481 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.381853 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.393106 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.404090 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:45:17.415563 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:45:17.533316 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:45:17.829057 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:45:17.965667 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:45:18.302554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13278): Launched 20:45:18.582752 run iperf3-srv_10.42.42.10(pid=13279): Launched 20:45:18.782689 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:45:18.918873 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:45:19.254776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13280): Launched 20:45:19.534900 run iperf3-srv_10.42.42.10(pid=13281): Launched 20:45:19.735078 tst cs_paging_gprs_active.py:38: start network... 20:45:19.871425 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:45:20.392668 run create_hlr_db(pid=13282): Launched 20:45:20.581732 bus /gobi_6: Setting Powered False 20:45:21.600410 run create_hlr_db(pid=13282): Terminated: ok {rc=0} 20:45:22.006888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13284): Launched 20:45:22.311867 run osmo-hlr_10.42.42.2(pid=13285): Launched 20:45:22.424421 run osmo-stp_10.42.42.5: Starting osmo-stp 20:45:22.952843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13287): Launched 20:45:23.256897 run osmo-stp_10.42.42.5(pid=13288): Launched 20:45:23.367984 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:45:23.896754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13290): Launched 20:45:24.005541 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:45:24.270817 run patchelf(pid=13291): Launched 20:45:24.448941 run osmo-stp_10.42.42.5(pid=13288): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13288)] 20:45:24.579054 run osmo-stp_10.42.42.5(pid=13288): stdout: | (launched: 2022-12-09_20:45:23.107139) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:45:24.709318 run osmo-stp_10.42.42.5(pid=13288): stderr: | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204523276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:45:24.835020 run osmo-stp_10.42.42.5(pid=13288): stdout: | (launched: 2022-12-09_20:45:23.107139) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:45:24.959521 run osmo-stp_10.42.42.5(pid=13288): stderr: | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204523276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204523276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204523277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:45:25.105229 run patchelf(pid=13291): Terminating (SIGINT) 20:45:25.276292 run patchelf(pid=13291): Terminated: ok {rc=0} 20:45:25.307697 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13288): Process ended prematurely: osmo-stp_10.42.42.5(pid=13288) [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13288)] [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:45:25.316998 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:45:25.376882 run osmo-hlr_10.42.42.2(pid=13285): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13285)] 20:45:25.425322 run osmo-hlr_10.42.42.2(pid=13285): stdout: | (launched: 2022-12-09_20:45:22.162088) 20:45:25.474657 run osmo-hlr_10.42.42.2(pid=13285): stderr: | �[0;m�[1;31m20221209204522338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209204522339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209204522339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209204522339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209204522339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209204522339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209204522351 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209204522361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209204522362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209204522362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:45:25.516149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13278): Terminating (SIGTERM) 20:45:25.555543 run iperf3-srv_10.42.42.10(pid=13279): Terminating (SIGTERM) 20:45:25.594882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13280): Terminating (SIGTERM) 20:45:25.633970 run iperf3-srv_10.42.42.10(pid=13281): Terminating (SIGTERM) 20:45:25.673320 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13284): Terminating (SIGTERM) 20:45:25.712728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13287): Terminating (SIGTERM) 20:45:25.751738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13290): Terminating (SIGTERM) 20:45:25.761109 --- ParallelTerminationStrategy: PID 13278 died... 20:45:25.814155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13278): Terminated: ok {rc=0} 20:45:25.824007 --- ParallelTerminationStrategy: PID 13279 died... 20:45:25.876107 run iperf3-srv_10.42.42.10(pid=13279): Terminated {rc=256} 20:45:25.885902 --- ParallelTerminationStrategy: PID 13280 died... 20:45:25.938326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13280): Terminated: ok {rc=0} 20:45:25.948034 --- ParallelTerminationStrategy: PID 13281 died... 20:45:26.000036 run iperf3-srv_10.42.42.10(pid=13281): Terminated {rc=256} 20:45:26.009831 --- ParallelTerminationStrategy: PID 13284 died... 20:45:26.062178 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13284): Terminated: ok {rc=0} 20:45:26.071797 --- ParallelTerminationStrategy: PID 13287 died... 20:45:26.125023 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13287): Terminated: ok {rc=0} 20:45:26.134621 --- ParallelTerminationStrategy: PID 13290 died... 20:45:26.187119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13290): Terminated: ok {rc=0} 20:45:26.274463 bus /gobi_0: Setting Powered False 20:45:27.380106 bus /gobi_0: Setting Powered False 20:45:28.487187 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13288): Process ended prematurely: osmo-stp_10.42.42.5(pid=13288) [trial-2364↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13288)]