Failed
dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=1679): Process ended prematurely: osmo-stp_10.42.42.5(pid=1679) [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1679)]
Standard Output
---------------------------------------------- trial-2366 dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 00:17:30.824841 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:30.837314 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 00:17:30.999662 tst switch_tch_pdch.py: using LAC 24671 00:17:31.123698 tst switch_tch_pdch.py: using RAC 191 00:17:31.247129 tst switch_tch_pdch.py: using CellId 24671 00:17:31.365630 tst switch_tch_pdch.py: using BVCI 24672 00:17:31.389088 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.401913 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.415330 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.428696 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.441308 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.455255 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.468846 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:17:31.483061 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 00:17:31.629987 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 00:17:31.978767 tst switch_tch_pdch.py:51: start network... 00:17:32.109725 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:17:32.587594 run create_hlr_db(pid=1673): Launched 00:17:32.757471 bus /gobi_6: Setting Powered False 00:17:33.779620 run create_hlr_db(pid=1673): Terminated: ok {rc=0} 00:17:34.170109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1675): Launched 00:17:34.463738 run osmo-hlr_10.42.42.2(pid=1676): Launched 00:17:34.578990 run osmo-stp_10.42.42.5: Starting osmo-stp 00:17:35.094695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1678): Launched 00:17:35.388815 run osmo-stp_10.42.42.5(pid=1679): Launched 00:17:35.495446 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:17:36.013815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1682): Launched 00:17:36.118124 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:17:36.381956 run patchelf(pid=1683): Launched 00:17:36.566219 run osmo-stp_10.42.42.5(pid=1679): ERR: Terminated: ERROR {rc=1} [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1679)] 00:17:36.701057 run osmo-stp_10.42.42.5(pid=1679): stdout: | (launched: 2022-12-10_00:17:35.244133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:17:36.836312 run osmo-stp_10.42.42.5(pid=1679): stderr: | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001735414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001735414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001735414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001735415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:17:36.966491 run osmo-stp_10.42.42.5(pid=1679): stdout: | (launched: 2022-12-10_00:17:35.244133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:17:37.095757 run osmo-stp_10.42.42.5(pid=1679): stderr: | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001735413 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001735414 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001735414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001735414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001735415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:17:37.246927 run patchelf(pid=1683): Terminating (SIGINT) 00:17:37.423330 run patchelf(pid=1683): Terminated: ok {rc=0} 00:17:37.455268 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=1679): Process ended prematurely: osmo-stp_10.42.42.5(pid=1679) [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1679)] [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 00:17:37.464591 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 00:17:37.528869 run osmo-hlr_10.42.42.2(pid=1676): ERR: Terminated: ERROR {rc=237} [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1676)] 00:17:37.580343 run osmo-hlr_10.42.42.2(pid=1676): stdout: | (launched: 2022-12-10_00:17:34.318933) 00:17:37.632443 run osmo-hlr_10.42.42.2(pid=1676): stderr: | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210001734496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210001734508 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210001734517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210001734517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210001734517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:17:37.676301 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1675): Terminating (SIGTERM) 00:17:37.718051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1678): Terminating (SIGTERM) 00:17:37.759735 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1682): Terminating (SIGTERM) 00:17:37.769727 --- ParallelTerminationStrategy: PID 1675 died... 00:17:37.826355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1675): Terminated: ok {rc=0} 00:17:37.836501 --- ParallelTerminationStrategy: PID 1678 died... 00:17:37.892100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1678): Terminated: ok {rc=0} 00:17:37.902213 --- ParallelTerminationStrategy: PID 1682 died... 00:17:37.957383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1682): Terminated: ok {rc=0} 00:17:38.044637 bus /gobi_0: Setting Powered False 00:17:39.147981 bus /gobi_0: Setting Powered False 00:17:40.257678 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1679): Process ended prematurely: osmo-stp_10.42.42.5(pid=1679) [trial-2366↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1679)]