Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=1524): Process ended prematurely: osmo-stp_10.42.42.5(pid=1524) [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1524)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 00:15:21.943613 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:21.955012 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 00:15:22.080399 tst ping_idle_ping.py: using LAC 24660 00:15:22.205678 tst ping_idle_ping.py: using RAC 180 00:15:22.324011 tst ping_idle_ping.py: using CellId 24660 00:15:22.443165 tst ping_idle_ping.py: using BVCI 24661 00:15:22.465670 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.476173 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.486833 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.497530 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.508155 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.518725 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.529393 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:22.539868 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:15:22.827100 tst ping_idle_ping.py:24: start network... 00:15:22.959267 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:15:23.458633 run create_hlr_db(pid=1518): Launched 00:15:23.642277 bus /gobi_6: Setting Powered False 00:15:24.663708 run create_hlr_db(pid=1518): Terminated: ok {rc=0} 00:15:25.059808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1520): Launched 00:15:25.355054 run osmo-hlr_10.42.42.2(pid=1521): Launched 00:15:25.468744 run osmo-stp_10.42.42.5: Starting osmo-stp 00:15:25.988922 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1523): Launched 00:15:26.284530 run osmo-stp_10.42.42.5(pid=1524): Launched 00:15:26.393181 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:15:26.908000 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1526): Launched 00:15:27.012816 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:15:27.270065 run patchelf(pid=1527): Launched 00:15:27.443200 run osmo-stp_10.42.42.5(pid=1524): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1524)] 00:15:27.570892 run osmo-stp_10.42.42.5(pid=1524): stdout: | (launched: 2022-12-10_00:15:26.139068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:27.698082 run osmo-stp_10.42.42.5(pid=1524): stderr: | �[0;m�[38;5;43m20221210001526307 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001526308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001526308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001526309 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:27.820463 run osmo-stp_10.42.42.5(pid=1524): stdout: | (launched: 2022-12-10_00:15:26.139068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:27.941296 run osmo-stp_10.42.42.5(pid=1524): stderr: | �[0;m�[38;5;43m20221210001526307 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001526308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001526308 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001526309 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001526311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:28.082206 run patchelf(pid=1527): Terminating (SIGINT) 00:15:28.248750 run patchelf(pid=1527): Terminated: ok {rc=0} 00:15:28.278961 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1524): Process ended prematurely: osmo-stp_10.42.42.5(pid=1524) [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1524)] [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 00:15:28.287578 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 00:15:28.347399 run osmo-hlr_10.42.42.2(pid=1521): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1521)] 00:15:28.396093 run osmo-hlr_10.42.42.2(pid=1521): stdout: | (launched: 2022-12-10_00:15:25.209374) 00:15:28.445821 run osmo-hlr_10.42.42.2(pid=1521): stderr: | �[0;m�[1;31m20221210001525384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210001525384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210001525384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210001525384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210001525385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210001525385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210001525396 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210001525406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210001525406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210001525406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:15:28.488061 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1520): Terminating (SIGTERM) 00:15:28.527798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1523): Terminating (SIGTERM) 00:15:28.567226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1526): Terminating (SIGTERM) 00:15:28.576464 --- ParallelTerminationStrategy: PID 1520 died... 00:15:28.629522 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1520): Terminated: ok {rc=0} 00:15:28.639215 --- ParallelTerminationStrategy: PID 1523 died... 00:15:28.692215 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1523): Terminated: ok {rc=0} 00:15:28.702100 --- ParallelTerminationStrategy: PID 1526 died... 00:15:28.755182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1526): Terminated: ok {rc=0} 00:15:28.838379 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1524): Process ended prematurely: osmo-stp_10.42.42.5(pid=1524) [trial-2366↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1524)]