Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=30102): Process ended prematurely: osmo-stp_10.42.42.5(pid=30102) [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30102)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 23:33:46.377639 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:46.390370 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 23:33:46.547288 tst cs_paging_gprs_active.py: using LAC 24438 23:33:46.673845 tst cs_paging_gprs_active.py: using RAC 213 23:33:46.831417 tst cs_paging_gprs_active.py: using CellId 24438 23:33:46.966135 tst cs_paging_gprs_active.py: using BVCI 24439 23:33:46.992262 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.004684 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.017319 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.029895 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.042775 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.055553 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.067605 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.081792 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:33:47.094373 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:33:47.217792 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:33:47.495510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:33:47.619462 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:33:47.927500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30092): Launched 23:33:48.184283 run iperf3-srv_10.42.42.10(pid=30093): Launched 23:33:48.368091 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:33:48.493410 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:33:48.802527 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30094): Launched 23:33:49.059086 run iperf3-srv_10.42.42.10(pid=30095): Launched 23:33:49.241040 tst cs_paging_gprs_active.py:38: start network... 23:33:49.365157 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:33:49.842550 run create_hlr_db(pid=30096): Launched 23:33:50.013952 bus /sierra_2: Setting Powered False 23:33:51.036247 run create_hlr_db(pid=30096): Terminated: ok {rc=0} 23:33:51.460810 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30098): Launched 23:33:51.780150 run osmo-hlr_10.42.42.2(pid=30099): Launched 23:33:51.898955 run osmo-stp_10.42.42.5: Starting osmo-stp 23:33:52.453697 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30101): Launched 23:33:52.772276 run osmo-stp_10.42.42.5(pid=30102): Launched 23:33:52.889089 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:33:53.446948 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30104): Launched 23:33:53.562313 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:33:53.840317 run patchelf(pid=30105): Launched 23:33:54.027929 run osmo-stp_10.42.42.5(pid=30102): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30102)] 23:33:54.165978 run osmo-stp_10.42.42.5(pid=30102): stdout: | (launched: 2022-12-09_23:33:52.616696) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:33:54.303941 run osmo-stp_10.42.42.5(pid=30102): stderr: | �[0;m�[38;5;43m20221209233352806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209233352806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209233352807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209233352807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:33:54.437320 run osmo-stp_10.42.42.5(pid=30102): stdout: | (launched: 2022-12-09_23:33:52.616696) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:33:54.569333 run osmo-stp_10.42.42.5(pid=30102): stderr: | �[0;m�[38;5;43m20221209233352806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209233352806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209233352807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209233352807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209233352810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:33:54.722437 run patchelf(pid=30105): Terminating (SIGINT) 23:33:54.902002 run patchelf(pid=30105): Terminated: ok {rc=0} 23:33:54.934995 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30102): Process ended prematurely: osmo-stp_10.42.42.5(pid=30102) [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30102)] [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 23:33:54.944887 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 23:33:55.007722 run osmo-hlr_10.42.42.2(pid=30099): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30099)] 23:33:55.058876 run osmo-hlr_10.42.42.2(pid=30099): stdout: | (launched: 2022-12-09_23:33:51.624616) 23:33:55.110875 run osmo-hlr_10.42.42.2(pid=30099): stderr: | �[0;m�[1;31m20221209233351819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209233351819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209233351819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209233351820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209233351820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209233351820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209233351832 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209233351840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209233351840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209233351840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:33:55.155013 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30092): Terminating (SIGTERM) 23:33:55.197239 run iperf3-srv_10.42.42.10(pid=30093): Terminating (SIGTERM) 23:33:55.238989 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30094): Terminating (SIGTERM) 23:33:55.280686 run iperf3-srv_10.42.42.10(pid=30095): Terminating (SIGTERM) 23:33:55.322543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30098): Terminating (SIGTERM) 23:33:55.364297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30101): Terminating (SIGTERM) 23:33:55.406120 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30104): Terminating (SIGTERM) 23:33:55.415962 --- ParallelTerminationStrategy: PID 30092 died... 23:33:55.472038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30092): Terminated: ok {rc=0} 23:33:55.482146 --- ParallelTerminationStrategy: PID 30093 died... 23:33:55.537510 run iperf3-srv_10.42.42.10(pid=30093): Terminated {rc=256} 23:33:55.547582 --- ParallelTerminationStrategy: PID 30094 died... 23:33:55.603285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30094): Terminated: ok {rc=0} 23:33:55.613224 --- ParallelTerminationStrategy: PID 30095 died... 23:33:55.668570 run iperf3-srv_10.42.42.10(pid=30095): Terminated {rc=256} 23:33:55.678603 --- ParallelTerminationStrategy: PID 30098 died... 23:33:55.734169 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30098): Terminated: ok {rc=0} 23:33:55.744150 --- ParallelTerminationStrategy: PID 30101 died... 23:33:55.799771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30101): Terminated: ok {rc=0} 23:33:55.809814 --- ParallelTerminationStrategy: PID 30104 died... 23:33:55.865710 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30104): Terminated: ok {rc=0} 23:33:55.952432 bus /gobi_0: Setting Powered False 23:33:57.059043 bus /gobi_0: Setting Powered False 23:33:58.166775 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30102): Process ended prematurely: osmo-stp_10.42.42.5(pid=30102) [trial-2366↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30102)]