Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6222): Process ended prematurely: osmo-stp_10.42.42.5(pid=6222) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py ---------------------------------------------- 01:07:10.400390 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:10.413229 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:07:10.561543 tst ping_idle_ping.py: using LAC 24923 01:07:10.686856 tst ping_idle_ping.py: using RAC 188 01:07:10.813020 tst ping_idle_ping.py: using CellId 24923 01:07:10.935827 tst ping_idle_ping.py: using BVCI 24924 01:07:10.960670 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:10.972562 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:10.984120 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:10.996091 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:11.007686 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:11.019535 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:11.031356 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:07:11.042994 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:07:11.330338 tst ping_idle_ping.py:24: start network... 01:07:11.461834 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:07:11.968676 run create_hlr_db(pid=6216): Launched 01:07:12.151263 bus /gobi_6: Setting Powered False 01:07:13.171088 run create_hlr_db(pid=6216): Terminated: ok {rc=0} 01:07:13.590325 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Launched 01:07:13.904741 run osmo-hlr_10.42.42.2(pid=6219): Launched 01:07:14.022515 run osmo-stp_10.42.42.5: Starting osmo-stp 01:07:14.570287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Launched 01:07:14.886056 run osmo-stp_10.42.42.5(pid=6222): Launched 01:07:14.999399 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:07:15.550461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Launched 01:07:15.662304 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:07:15.970297 run patchelf(pid=6225): Launched 01:07:16.158821 run osmo-stp_10.42.42.5(pid=6222): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)] 01:07:16.295766 run osmo-stp_10.42.42.5(pid=6222): stdout: | (launched: 2022-12-10_01:07:14.730362) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:07:16.433368 run osmo-stp_10.42.42.5(pid=6222): stderr: | �[0;m�[38;5;43m20221210010714922 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010714922 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010714923 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010714923 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010714923 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010714923 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010714924 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:07:16.566664 run osmo-stp_10.42.42.5(pid=6222): stdout: | (launched: 2022-12-10_01:07:14.730362) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:07:16.699917 run osmo-stp_10.42.42.5(pid=6222): stderr: | �[0;m�[38;5;43m20221210010714922 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010714922 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010714923 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010714923 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010714923 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010714923 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010714924 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:07:16.853973 run patchelf(pid=6225): Terminating (SIGINT) 01:07:17.032869 run patchelf(pid=6225): Terminated: ok {rc=0} 01:07:17.066161 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6222): Process ended prematurely: osmo-stp_10.42.42.5(pid=6222) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)] [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27] 01:07:17.075912 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 01:07:17.139889 run osmo-hlr_10.42.42.2(pid=6219): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6219)] 01:07:17.191241 run osmo-hlr_10.42.42.2(pid=6219): stdout: | (launched: 2022-12-10_01:07:13.750111) 01:07:17.243030 run osmo-hlr_10.42.42.2(pid=6219): stderr: | �[0;m�[1;31m20221210010713945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210010713945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210010713945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210010713945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210010713945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210010713946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210010713958 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210010713966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210010713966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210010713966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:07:17.287468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Terminating (SIGTERM) 01:07:17.329339 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Terminating (SIGTERM) 01:07:17.370895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Terminating (SIGTERM) 01:07:17.380604 --- ParallelTerminationStrategy: PID 6218 died... 01:07:17.436126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Terminated: ok {rc=0} 01:07:17.446267 --- ParallelTerminationStrategy: PID 6221 died... 01:07:17.501449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Terminated: ok {rc=0} 01:07:17.511727 --- ParallelTerminationStrategy: PID 6224 died... 01:07:17.567132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Terminated: ok {rc=0} 01:07:17.653601 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6222): Process ended prematurely: osmo-stp_10.42.42.5(pid=6222) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)]