Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8105): Process ended prematurely: osmo-stp_10.42.42.5(pid=8105) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8105)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:22:29.358337 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.369117 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:22:29.524470 tst cs_paging_gprs_active.py: using LAC 25005 01:22:29.645189 tst cs_paging_gprs_active.py: using RAC 15 01:22:29.761715 tst cs_paging_gprs_active.py: using CellId 25005 01:22:29.877478 tst cs_paging_gprs_active.py: using BVCI 25006 01:22:29.899859 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.910637 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.921472 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.932833 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.944923 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.955630 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.967075 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.978449 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:22:29.989905 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:22:30.110904 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:22:30.403069 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:22:30.535549 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:22:30.864589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8095): Launched 01:22:31.169408 run iperf3-srv_10.42.42.10(pid=8096): Launched 01:22:31.357106 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:22:31.486906 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:22:31.884376 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8097): Launched 01:22:32.209008 run iperf3-srv_10.42.42.10(pid=8098): Launched 01:22:32.395273 tst cs_paging_gprs_active.py:38: start network... 01:22:32.518812 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:22:32.986256 run create_hlr_db(pid=8099): Launched 01:22:33.155972 bus /gobi_6: Setting Powered False 01:22:34.178293 run create_hlr_db(pid=8099): Terminated: ok {rc=0} 01:22:34.598811 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8101): Launched 01:22:34.915446 run osmo-hlr_10.42.42.2(pid=8102): Launched 01:22:35.035812 run osmo-stp_10.42.42.5: Starting osmo-stp 01:22:35.586337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8104): Launched 01:22:35.903534 run osmo-stp_10.42.42.5(pid=8105): Launched 01:22:36.028692 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:22:36.580427 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8107): Launched 01:22:36.693520 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:22:36.970632 run patchelf(pid=8108): Launched 01:22:37.154849 run osmo-stp_10.42.42.5(pid=8105): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8105)] 01:22:37.289525 run osmo-stp_10.42.42.5(pid=8105): stdout: | (launched: 2022-12-10_01:22:35.747676) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:37.424680 run osmo-stp_10.42.42.5(pid=8105): stderr: | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012235959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:37.555055 run osmo-stp_10.42.42.5(pid=8105): stdout: | (launched: 2022-12-10_01:22:35.747676) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:37.684229 run osmo-stp_10.42.42.5(pid=8105): stderr: | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012235958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012235959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012235959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:37.835039 run patchelf(pid=8108): Terminating (SIGINT) 01:22:38.011505 run patchelf(pid=8108): Terminated: ok {rc=0} 01:22:38.044300 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8105): Process ended prematurely: osmo-stp_10.42.42.5(pid=8105) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8105)] [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:22:38.054063 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:22:38.116118 run osmo-hlr_10.42.42.2(pid=8102): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8102)] 01:22:38.167167 run osmo-hlr_10.42.42.2(pid=8102): stdout: | (launched: 2022-12-10_01:22:34.760245) 01:22:38.218393 run osmo-hlr_10.42.42.2(pid=8102): stderr: | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210012234958 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210012234971 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210012234981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210012234981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210012234981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:22:38.262233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8095): Terminating (SIGTERM) 01:22:38.303437 run iperf3-srv_10.42.42.10(pid=8096): Terminating (SIGTERM) 01:22:38.344710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8097): Terminating (SIGTERM) 01:22:38.385771 run iperf3-srv_10.42.42.10(pid=8098): Terminating (SIGTERM) 01:22:38.426864 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8101): Terminating (SIGTERM) 01:22:38.468405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8104): Terminating (SIGTERM) 01:22:38.509774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8107): Terminating (SIGTERM) 01:22:38.519349 --- ParallelTerminationStrategy: PID 8095 died... 01:22:38.574840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8095): Terminated: ok {rc=0} 01:22:38.584777 --- ParallelTerminationStrategy: PID 8096 died... 01:22:38.639490 run iperf3-srv_10.42.42.10(pid=8096): Terminated {rc=256} 01:22:38.649548 --- ParallelTerminationStrategy: PID 8097 died... 01:22:38.704512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8097): Terminated: ok {rc=0} 01:22:38.714822 --- ParallelTerminationStrategy: PID 8098 died... 01:22:38.769325 run iperf3-srv_10.42.42.10(pid=8098): Terminated {rc=256} 01:22:38.779206 --- ParallelTerminationStrategy: PID 8101 died... 01:22:38.834143 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8101): Terminated: ok {rc=0} 01:22:38.844112 --- ParallelTerminationStrategy: PID 8104 died... 01:22:38.898972 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8104): Terminated: ok {rc=0} 01:22:38.909013 --- ParallelTerminationStrategy: PID 8107 died... 01:22:38.963862 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8107): Terminated: ok {rc=0} 01:22:39.048780 bus /gobi_0: Setting Powered False 01:22:40.155352 bus /gobi_0: Setting Powered False 01:22:41.264369 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8105): Process ended prematurely: osmo-stp_10.42.42.5(pid=8105) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8105)]