Failed
dynts:trx-lms+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9076): Process ended prematurely: osmo-stp_10.42.42.5(pid=9076) [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9076)]
Standard Output
---------------------------------------------- trial-2367 dynts:trx-lms+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 01:32:32.978910 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:32.989907 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 01:32:33.147572 tst switch_tch_pdch.py: using LAC 25058 01:32:33.266156 tst switch_tch_pdch.py: using RAC 68 01:32:33.382731 tst switch_tch_pdch.py: using CellId 25058 01:32:33.500505 tst switch_tch_pdch.py: using BVCI 25059 01:32:33.523275 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.534169 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.544824 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.556301 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.567960 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.579596 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.591300 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 01:32:33.602737 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 01:32:33.723083 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 01:32:33.999054 tst switch_tch_pdch.py:51: start network... 01:32:34.122872 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:32:34.568256 run create_hlr_db(pid=9066): Launched 01:32:34.689589 bus /gobi_6: Setting Powered False 01:32:35.760809 run create_hlr_db(pid=9066): Terminated: ok {rc=0} 01:32:36.134337 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9072): Launched 01:32:36.431672 run osmo-hlr_10.42.42.2(pid=9073): Launched 01:32:36.539581 run osmo-stp_10.42.42.5: Starting osmo-stp 01:32:37.030301 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9075): Launched 01:32:37.328231 run osmo-stp_10.42.42.5(pid=9076): Launched 01:32:37.435757 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:32:37.930024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9078): Launched 01:32:38.036186 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:32:38.296763 run patchelf(pid=9079): Launched 01:32:38.470739 run osmo-stp_10.42.42.5(pid=9076): ERR: Terminated: ERROR {rc=1} [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9076)] 01:32:38.597825 run osmo-stp_10.42.42.5(pid=9076): stdout: | (launched: 2022-12-10_01:32:37.180765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:38.724718 run osmo-stp_10.42.42.5(pid=9076): stderr: | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013237354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:38.847997 run osmo-stp_10.42.42.5(pid=9076): stdout: | (launched: 2022-12-10_01:32:37.180765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:32:38.970583 run osmo-stp_10.42.42.5(pid=9076): stderr: | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013237353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013237354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013237354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:32:39.112907 run patchelf(pid=9079): Terminating (SIGINT) 01:32:39.279452 run patchelf(pid=9079): Terminated: ok {rc=0} 01:32:39.309919 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9076): Process ended prematurely: osmo-stp_10.42.42.5(pid=9076) [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9076)] [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 01:32:39.318433 tst switch_tch_pdch.py:54: Test FAILED (6.3 sec) 01:32:39.378221 run osmo-hlr_10.42.42.2(pid=9073): ERR: Terminated: ERROR {rc=237} [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9073)] 01:32:39.427023 run osmo-hlr_10.42.42.2(pid=9073): stdout: | (launched: 2022-12-10_01:32:36.285113) 01:32:39.476137 run osmo-hlr_10.42.42.2(pid=9073): stderr: | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210013236459 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210013236471 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/dynts:trx-lms+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210013236480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210013236480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210013236481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:32:39.518163 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9072): Terminating (SIGTERM) 01:32:39.557449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9075): Terminating (SIGTERM) 01:32:39.596638 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9078): Terminating (SIGTERM) 01:32:39.606841 --- ParallelTerminationStrategy: PID 9072 died... 01:32:39.659597 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9072): Terminated: ok {rc=0} 01:32:39.669457 --- ParallelTerminationStrategy: PID 9075 died... 01:32:39.722037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9075): Terminated: ok {rc=0} 01:32:39.731805 --- ParallelTerminationStrategy: PID 9078 died... 01:32:39.784796 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9078): Terminated: ok {rc=0} 01:32:39.872008 bus /gobi_0: Setting Powered False 01:32:40.977709 bus /gobi_0: Setting Powered False 01:32:42.083371 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9076): Process ended prematurely: osmo-stp_10.42.42.5(pid=9076) [trial-2367↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9076)]