Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4113): Process ended prematurely: osmo-stp_10.42.42.5(pid=4113) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4113)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 00:48:42.369246 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.381165 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:48:42.529436 tst ping_idle_ping.py: using LAC 24825 00:48:42.651200 tst ping_idle_ping.py: using RAC 90 00:48:42.775040 tst ping_idle_ping.py: using CellId 24825 00:48:42.898596 tst ping_idle_ping.py: using BVCI 24826 00:48:42.922366 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.933586 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.944398 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.955815 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.967207 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.978532 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:42.990048 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:43.001579 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:48:43.270754 tst ping_idle_ping.py:24: start network... 00:48:43.390672 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:48:43.852738 run create_hlr_db(pid=4107): Launched 00:48:44.019186 bus /gobi_6: Setting Powered False 00:48:45.040168 run create_hlr_db(pid=4107): Terminated: ok {rc=0} 00:48:45.456510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4109): Launched 00:48:45.772806 run osmo-hlr_10.42.42.2(pid=4110): Launched 00:48:45.952253 run osmo-stp_10.42.42.5: Starting osmo-stp 00:48:46.676260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4112): Launched 00:48:47.057540 run osmo-stp_10.42.42.5(pid=4113): Launched 00:48:47.235193 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:48:47.767096 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4115): Launched 00:48:47.870056 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:48:48.125694 run patchelf(pid=4116): Launched 00:48:48.295376 run osmo-stp_10.42.42.5(pid=4113): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4113)] 00:48:48.419301 run osmo-stp_10.42.42.5(pid=4113): stdout: | (launched: 2022-12-10_00:48:46.827687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:48.543710 run osmo-stp_10.42.42.5(pid=4113): stderr: | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004847173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:48.663937 run osmo-stp_10.42.42.5(pid=4113): stdout: | (launched: 2022-12-10_00:48:46.827687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:48.783413 run osmo-stp_10.42.42.5(pid=4113): stderr: | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004847160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004847173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004847176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:48.921512 run patchelf(pid=4116): Terminating (SIGINT) 00:48:49.083405 run patchelf(pid=4116): Terminated: ok {rc=0} 00:48:49.113011 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=4113): Process ended prematurely: osmo-stp_10.42.42.5(pid=4113) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4113)] [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 00:48:49.121514 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 00:48:49.181148 run osmo-hlr_10.42.42.2(pid=4110): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4110)] 00:48:49.229434 run osmo-hlr_10.42.42.2(pid=4110): stdout: | (launched: 2022-12-10_00:48:45.614747) 00:48:49.279065 run osmo-hlr_10.42.42.2(pid=4110): stderr: | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004845814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004845837 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004845856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004845856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004845857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:48:49.320610 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4109): Terminating (SIGTERM) 00:48:49.360123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4112): Terminating (SIGTERM) 00:48:49.399812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4115): Terminating (SIGTERM) 00:48:49.409307 --- ParallelTerminationStrategy: PID 4109 died... 00:48:49.462566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4109): Terminated: ok {rc=0} 00:48:49.472107 --- ParallelTerminationStrategy: PID 4112 died... 00:48:49.524606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4112): Terminated: ok {rc=0} 00:48:49.534411 --- ParallelTerminationStrategy: PID 4115 died... 00:48:49.587504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4115): Terminated: ok {rc=0} 00:48:49.674227 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4113): Process ended prematurely: osmo-stp_10.42.42.5(pid=4113) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4113)]