Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5964): Process ended prematurely: osmo-stp_10.42.42.5(pid=5964) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5964)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:03:22.789424 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:22.800113 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:03:22.938019 tst cs_paging_gprs_active.py: using LAC 24904 01:03:23.058903 tst cs_paging_gprs_active.py: using RAC 169 01:03:23.175596 tst cs_paging_gprs_active.py: using CellId 24904 01:03:23.294262 tst cs_paging_gprs_active.py: using BVCI 24905 01:03:23.316734 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.327459 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.337972 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.348927 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.359518 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.370150 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.380855 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.391422 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:03:23.402219 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:23.520003 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:03:23.795824 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:03:23.920056 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:24.229274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5954): Launched 01:03:24.484934 run iperf3-srv_10.42.42.10(pid=5955): Launched 01:03:24.665501 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:03:24.788781 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:03:25.096085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5956): Launched 01:03:25.352059 run iperf3-srv_10.42.42.10(pid=5957): Launched 01:03:25.533167 tst cs_paging_gprs_active.py:38: start network... 01:03:25.657283 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:03:26.125528 run create_hlr_db(pid=5958): Launched 01:03:26.295801 bus /gobi_6: Setting Powered False 01:03:27.316786 run create_hlr_db(pid=5958): Terminated: ok {rc=0} 01:03:27.738578 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5960): Launched 01:03:28.057230 run osmo-hlr_10.42.42.2(pid=5961): Launched 01:03:28.177339 run osmo-stp_10.42.42.5: Starting osmo-stp 01:03:28.732818 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5963): Launched 01:03:29.053156 run osmo-stp_10.42.42.5(pid=5964): Launched 01:03:29.169886 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:03:29.725993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5966): Launched 01:03:29.839703 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:03:30.117144 run patchelf(pid=5967): Launched 01:03:30.303701 run osmo-stp_10.42.42.5(pid=5964): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5964)] 01:03:30.439659 run osmo-stp_10.42.42.5(pid=5964): stdout: | (launched: 2022-12-10_01:03:28.895244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:30.575820 run osmo-stp_10.42.42.5(pid=5964): stderr: | �[0;m�[38;5;43m20221210010329086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010329087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010329087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010329087 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:30.707550 run osmo-stp_10.42.42.5(pid=5964): stdout: | (launched: 2022-12-10_01:03:28.895244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:30.838173 run osmo-stp_10.42.42.5(pid=5964): stderr: | �[0;m�[38;5;43m20221210010329086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010329087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010329087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010329087 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010329091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:30.993906 run patchelf(pid=5967): Terminating (SIGINT) 01:03:31.175700 run patchelf(pid=5967): Terminated: ok {rc=0} 01:03:31.210048 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5964): Process ended prematurely: osmo-stp_10.42.42.5(pid=5964) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5964)] [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:03:31.220606 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 01:03:31.284500 run osmo-hlr_10.42.42.2(pid=5961): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5961)] 01:03:31.336701 run osmo-hlr_10.42.42.2(pid=5961): stdout: | (launched: 2022-12-10_01:03:27.900480) 01:03:31.390623 run osmo-hlr_10.42.42.2(pid=5961): stderr: | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210010328099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210010328112 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210010328120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210010328120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210010328120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:03:31.435328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5954): Terminating (SIGTERM) 01:03:31.479644 run iperf3-srv_10.42.42.10(pid=5955): Terminating (SIGTERM) 01:03:31.523339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5956): Terminating (SIGTERM) 01:03:31.567092 run iperf3-srv_10.42.42.10(pid=5957): Terminating (SIGTERM) 01:03:31.611233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5960): Terminating (SIGTERM) 01:03:31.655777 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5963): Terminating (SIGTERM) 01:03:31.699679 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5966): Terminating (SIGTERM) 01:03:31.709421 --- ParallelTerminationStrategy: PID 5954 died... 01:03:31.765377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5954): Terminated: ok {rc=0} 01:03:31.775771 --- ParallelTerminationStrategy: PID 5955 died... 01:03:31.831358 run iperf3-srv_10.42.42.10(pid=5955): Terminated {rc=256} 01:03:31.841695 --- ParallelTerminationStrategy: PID 5956 died... 01:03:31.897367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5956): Terminated: ok {rc=0} 01:03:31.907680 --- ParallelTerminationStrategy: PID 5957 died... 01:03:31.963362 run iperf3-srv_10.42.42.10(pid=5957): Terminated {rc=256} 01:03:31.973689 --- ParallelTerminationStrategy: PID 5960 died... 01:03:32.029640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5960): Terminated: ok {rc=0} 01:03:32.040011 --- ParallelTerminationStrategy: PID 5963 died... 01:03:32.095562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5963): Terminated: ok {rc=0} 01:03:32.106006 --- ParallelTerminationStrategy: PID 5966 died... 01:03:32.163573 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5966): Terminated: ok {rc=0} 01:03:32.251162 bus /gobi_0: Setting Powered False 01:03:33.354743 bus /gobi_0: Setting Powered False 01:03:34.463970 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5964): Process ended prematurely: osmo-stp_10.42.42.5(pid=5964) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5964)]