Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6014): Process ended prematurely: osmo-stp_10.42.42.5(pid=6014) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6014)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 01:04:12.011029 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.022800 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:04:12.159617 tst ping_idle_ping.py: using LAC 24908 01:04:12.279898 tst ping_idle_ping.py: using RAC 173 01:04:12.410862 tst ping_idle_ping.py: using CellId 24908 01:04:12.540490 tst ping_idle_ping.py: using BVCI 24909 01:04:12.564090 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.575344 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.586432 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.597501 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.608378 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.619348 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.630604 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:12.641654 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:04:12.908879 tst ping_idle_ping.py:24: start network... 01:04:13.029058 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:04:13.487937 run create_hlr_db(pid=6008): Launched 01:04:13.655589 bus /gobi_6: Setting Powered False 01:04:14.676614 run create_hlr_db(pid=6008): Terminated: ok {rc=0} 01:04:15.091925 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6010): Launched 01:04:15.405994 run osmo-hlr_10.42.42.2(pid=6011): Launched 01:04:15.520893 run osmo-stp_10.42.42.5: Starting osmo-stp 01:04:16.104019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6013): Launched 01:04:16.520006 run osmo-stp_10.42.42.5(pid=6014): Launched 01:04:16.792462 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:04:17.392604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6016): Launched 01:04:17.504400 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:04:17.774815 run patchelf(pid=6017): Launched 01:04:17.956609 run osmo-stp_10.42.42.5(pid=6014): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6014)] 01:04:18.089649 run osmo-stp_10.42.42.5(pid=6014): stdout: | (launched: 2022-12-10_01:04:16.256034) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:18.223330 run osmo-stp_10.42.42.5(pid=6014): stderr: | �[0;m�[38;5;43m20221210010416672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010416672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010416674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010416677 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010416679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010416680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010416680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:18.352298 run osmo-stp_10.42.42.5(pid=6014): stdout: | (launched: 2022-12-10_01:04:16.256034) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:18.480233 run osmo-stp_10.42.42.5(pid=6014): stderr: | �[0;m�[38;5;43m20221210010416672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010416672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010416674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010416677 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010416679 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010416680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010416680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:18.628309 run patchelf(pid=6017): Terminating (SIGINT) 01:04:18.802001 run patchelf(pid=6017): Terminated: ok {rc=0} 01:04:18.833462 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6014): Process ended prematurely: osmo-stp_10.42.42.5(pid=6014) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6014)] [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 01:04:18.842409 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 01:04:18.903737 run osmo-hlr_10.42.42.2(pid=6011): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6011)] 01:04:18.954021 run osmo-hlr_10.42.42.2(pid=6011): stdout: | (launched: 2022-12-10_01:04:15.251447) 01:04:19.004840 run osmo-hlr_10.42.42.2(pid=6011): stderr: | �[0;m�[1;31m20221210010415447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210010415447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210010415447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210010415448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210010415448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210010415448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210010415460 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210010415468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210010415468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210010415468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:04:19.048160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6010): Terminating (SIGTERM) 01:04:19.088929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6013): Terminating (SIGTERM) 01:04:19.129922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6016): Terminating (SIGTERM) 01:04:19.139393 --- ParallelTerminationStrategy: PID 6010 died... 01:04:19.194260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6010): Terminated: ok {rc=0} 01:04:19.204091 --- ParallelTerminationStrategy: PID 6013 died... 01:04:19.258753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6013): Terminated: ok {rc=0} 01:04:19.268602 --- ParallelTerminationStrategy: PID 6016 died... 01:04:19.322936 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6016): Terminated: ok {rc=0} 01:04:19.408608 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6014): Process ended prematurely: osmo-stp_10.42.42.5(pid=6014) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6014)]