Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6171): Process ended prematurely: osmo-stp_10.42.42.5(pid=6171) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6171)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:06:20.747399 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:20.758916 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:06:20.909085 tst cs_paging_gprs_active.py: using LAC 24919 01:06:21.037780 tst cs_paging_gprs_active.py: using RAC 184 01:06:21.153857 tst cs_paging_gprs_active.py: using CellId 24919 01:06:21.268732 tst cs_paging_gprs_active.py: using BVCI 24920 01:06:21.291346 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.302604 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.313537 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.324833 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.336196 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.347484 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.358892 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.370220 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:21.381631 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:06:21.500554 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:06:21.775920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:06:21.900889 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:22.210524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6161): Launched 01:06:22.467621 run iperf3-srv_10.42.42.10(pid=6162): Launched 01:06:22.649305 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:06:22.773351 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:23.082782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6163): Launched 01:06:23.340195 run iperf3-srv_10.42.42.10(pid=6164): Launched 01:06:23.521193 tst cs_paging_gprs_active.py:38: start network... 01:06:23.645299 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:06:24.114155 run create_hlr_db(pid=6165): Launched 01:06:24.285446 bus /gobi_6: Setting Powered False 01:06:25.308130 run create_hlr_db(pid=6165): Terminated: ok {rc=0} 01:06:25.732875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6167): Launched 01:06:26.053670 run osmo-hlr_10.42.42.2(pid=6168): Launched 01:06:26.173504 run osmo-stp_10.42.42.5: Starting osmo-stp 01:06:26.730837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6170): Launched 01:06:27.050513 run osmo-stp_10.42.42.5(pid=6171): Launched 01:06:27.166972 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:06:27.725868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6173): Launched 01:06:27.840189 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:06:28.119535 run patchelf(pid=6174): Launched 01:06:28.307220 run osmo-stp_10.42.42.5(pid=6171): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6171)] 01:06:28.444116 run osmo-stp_10.42.42.5(pid=6171): stdout: | (launched: 2022-12-10_01:06:26.893396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:28.581283 run osmo-stp_10.42.42.5(pid=6171): stderr: | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010627086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:28.713435 run osmo-stp_10.42.42.5(pid=6171): stdout: | (launched: 2022-12-10_01:06:26.893396) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:28.844632 run osmo-stp_10.42.42.5(pid=6171): stderr: | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010627085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010627086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010627086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:28.997009 run patchelf(pid=6174): Terminating (SIGINT) 01:06:29.175450 run patchelf(pid=6174): Terminated: ok {rc=0} 01:06:29.208264 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6171): Process ended prematurely: osmo-stp_10.42.42.5(pid=6171) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6171)] [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:06:29.218114 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 01:06:29.281836 run osmo-hlr_10.42.42.2(pid=6168): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6168)] 01:06:29.333344 run osmo-hlr_10.42.42.2(pid=6168): stdout: | (launched: 2022-12-10_01:06:25.895878) 01:06:29.385536 run osmo-hlr_10.42.42.2(pid=6168): stderr: | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210010626094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210010626106 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210010626116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210010626116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210010626116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:06:29.430039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6161): Terminating (SIGTERM) 01:06:29.471816 run iperf3-srv_10.42.42.10(pid=6162): Terminating (SIGTERM) 01:06:29.513608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6163): Terminating (SIGTERM) 01:06:29.555917 run iperf3-srv_10.42.42.10(pid=6164): Terminating (SIGTERM) 01:06:29.597652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6167): Terminating (SIGTERM) 01:06:29.639346 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6170): Terminating (SIGTERM) 01:06:29.681032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6173): Terminating (SIGTERM) 01:06:29.690729 --- ParallelTerminationStrategy: PID 6161 died... 01:06:29.746721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6161): Terminated: ok {rc=0} 01:06:29.756777 --- ParallelTerminationStrategy: PID 6162 died... 01:06:29.812066 run iperf3-srv_10.42.42.10(pid=6162): Terminated {rc=256} 01:06:29.822083 --- ParallelTerminationStrategy: PID 6163 died... 01:06:29.877629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6163): Terminated: ok {rc=0} 01:06:29.887729 --- ParallelTerminationStrategy: PID 6164 died... 01:06:29.943422 run iperf3-srv_10.42.42.10(pid=6164): Terminated {rc=256} 01:06:29.953868 --- ParallelTerminationStrategy: PID 6167 died... 01:06:30.009556 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6167): Terminated: ok {rc=0} 01:06:30.019662 --- ParallelTerminationStrategy: PID 6170 died... 01:06:30.075237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6170): Terminated: ok {rc=0} 01:06:30.085395 --- ParallelTerminationStrategy: PID 6173 died... 01:06:30.140899 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6173): Terminated: ok {rc=0} 01:06:30.228530 bus /gobi_0: Setting Powered False 01:06:31.350339 bus /gobi_0: Setting Powered False 01:06:32.460467 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6171): Process ended prematurely: osmo-stp_10.42.42.5(pid=6171) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6171)]