Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9818): Process ended prematurely: osmo-stp_10.42.42.5(pid=9818) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9818)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:39:09.256904 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.268110 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:39:09.430091 tst cs_paging_gprs_active.py: using LAC 25094 01:39:09.559309 tst cs_paging_gprs_active.py: using RAC 104 01:39:09.686420 tst cs_paging_gprs_active.py: using CellId 25094 01:39:09.812826 tst cs_paging_gprs_active.py: using BVCI 25095 01:39:09.837594 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.849316 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.860496 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.872493 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.884304 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.896024 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.907931 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.919709 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:09.932263 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:10.051303 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:10.328485 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:39:10.454306 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:10.767309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9808): Launched 01:39:11.027801 run iperf3-srv_10.42.42.10(pid=9809): Launched 01:39:11.211703 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:39:11.337423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:11.650986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9810): Launched 01:39:11.912770 run iperf3-srv_10.42.42.10(pid=9811): Launched 01:39:12.097385 tst cs_paging_gprs_active.py:38: start network... 01:39:12.223168 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:39:12.702235 run create_hlr_db(pid=9812): Launched 01:39:12.875817 bus /gobi_6: Setting Powered False 01:39:13.898066 run create_hlr_db(pid=9812): Terminated: ok {rc=0} 01:39:14.328067 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9814): Launched 01:39:14.654203 run osmo-hlr_10.42.42.2(pid=9815): Launched 01:39:14.776454 run osmo-stp_10.42.42.5: Starting osmo-stp 01:39:15.342793 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9817): Launched 01:39:15.669266 run osmo-stp_10.42.42.5(pid=9818): Launched 01:39:15.788108 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:39:16.354454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9820): Launched 01:39:16.466133 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:39:16.762860 run patchelf(pid=9821): Launched 01:39:16.946215 run osmo-stp_10.42.42.5(pid=9818): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9818)] 01:39:17.079439 run osmo-stp_10.42.42.5(pid=9818): stdout: | (launched: 2022-12-10_01:39:15.507050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:39:17.214470 run osmo-stp_10.42.42.5(pid=9818): stderr: | �[0;m�[38;5;43m20221210013915700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013915700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013915701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013915701 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013915701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013915701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013915702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:39:17.339823 run osmo-stp_10.42.42.5(pid=9818): stdout: | (launched: 2022-12-10_01:39:15.507050) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:39:17.463932 run osmo-stp_10.42.42.5(pid=9818): stderr: | �[0;m�[38;5;43m20221210013915700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210013915700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210013915701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210013915701 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210013915701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210013915701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210013915702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:39:17.608859 run patchelf(pid=9821): Terminating (SIGINT) 01:39:17.779340 run patchelf(pid=9821): Terminated: ok {rc=0} 01:39:17.810874 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9818): Process ended prematurely: osmo-stp_10.42.42.5(pid=9818) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9818)] [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:39:17.820325 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 01:39:17.881251 run osmo-hlr_10.42.42.2(pid=9815): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9815)] 01:39:17.930587 run osmo-hlr_10.42.42.2(pid=9815): stdout: | (launched: 2022-12-10_01:39:14.492273) 01:39:17.980224 run osmo-hlr_10.42.42.2(pid=9815): stderr: | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210013914690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210013914703 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210013914713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210013914713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210013914714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:39:18.022633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9808): Terminating (SIGTERM) 01:39:18.062665 run iperf3-srv_10.42.42.10(pid=9809): Terminating (SIGTERM) 01:39:18.103101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9810): Terminating (SIGTERM) 01:39:18.142742 run iperf3-srv_10.42.42.10(pid=9811): Terminating (SIGTERM) 01:39:18.182681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9814): Terminating (SIGTERM) 01:39:18.222425 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9817): Terminating (SIGTERM) 01:39:18.262706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9820): Terminating (SIGTERM) 01:39:18.272414 --- ParallelTerminationStrategy: PID 9808 died... 01:39:18.325921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9808): Terminated: ok {rc=0} 01:39:18.335597 --- ParallelTerminationStrategy: PID 9809 died... 01:39:18.388830 run iperf3-srv_10.42.42.10(pid=9809): Terminated {rc=256} 01:39:18.398725 --- ParallelTerminationStrategy: PID 9810 died... 01:39:18.451818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9810): Terminated: ok {rc=0} 01:39:18.461871 --- ParallelTerminationStrategy: PID 9811 died... 01:39:18.515186 run iperf3-srv_10.42.42.10(pid=9811): Terminated {rc=256} 01:39:18.524795 --- ParallelTerminationStrategy: PID 9814 died... 01:39:18.577928 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9814): Terminated: ok {rc=0} 01:39:18.587859 --- ParallelTerminationStrategy: PID 9817 died... 01:39:18.641159 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9817): Terminated: ok {rc=0} 01:39:18.650983 --- ParallelTerminationStrategy: PID 9820 died... 01:39:18.704254 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9820): Terminated: ok {rc=0} 01:39:18.792401 bus /gobi_0: Setting Powered False 01:39:19.896211 bus /gobi_0: Setting Powered False 01:39:21.007624 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9818): Process ended prematurely: osmo-stp_10.42.42.5(pid=9818) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9818)]