Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7387): Process ended prematurely: osmo-stp_10.42.42.5(pid=7387) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7387)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:12:15.280000 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.291297 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:12:15.437497 tst cs_paging_gprs_active.py: using LAC 24951 01:12:15.567366 tst cs_paging_gprs_active.py: using RAC 216 01:12:15.694985 tst cs_paging_gprs_active.py: using CellId 24951 01:12:15.824407 tst cs_paging_gprs_active.py: using BVCI 24952 01:12:15.850263 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.862288 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.876726 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.889746 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.901471 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.915587 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.927478 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.939138 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:12:15.951137 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:12:16.080041 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:12:16.393544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:12:16.525651 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:12:16.864236 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7377): Launched 01:12:17.150750 run iperf3-srv_10.42.42.10(pid=7378): Launched 01:12:17.343806 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:12:17.474044 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:12:17.791661 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7379): Launched 01:12:18.057518 run iperf3-srv_10.42.42.10(pid=7380): Launched 01:12:18.242978 tst cs_paging_gprs_active.py:38: start network... 01:12:18.370169 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:12:18.867400 run create_hlr_db(pid=7381): Launched 01:12:19.058197 bus /gobi_6: Setting Powered False 01:12:20.076564 run create_hlr_db(pid=7381): Terminated: ok {rc=0} 01:12:20.487542 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7383): Launched 01:12:20.795558 run osmo-hlr_10.42.42.2(pid=7384): Launched 01:12:20.915853 run osmo-stp_10.42.42.5: Starting osmo-stp 01:12:21.454996 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7386): Launched 01:12:21.762183 run osmo-stp_10.42.42.5(pid=7387): Launched 01:12:21.873734 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:12:22.407233 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7389): Launched 01:12:22.516405 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:12:22.783467 run patchelf(pid=7390): Launched 01:12:22.962351 run osmo-stp_10.42.42.5(pid=7387): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7387)] 01:12:23.092472 run osmo-stp_10.42.42.5(pid=7387): stdout: | (launched: 2022-12-10_01:12:21.611047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:12:23.223259 run osmo-stp_10.42.42.5(pid=7387): stderr: | �[0;m�[38;5;43m20221210011221782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210011221782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210011221783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210011221783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210011221783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210011221784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210011221784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:12:23.350033 run osmo-stp_10.42.42.5(pid=7387): stdout: | (launched: 2022-12-10_01:12:21.611047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:12:23.475219 run osmo-stp_10.42.42.5(pid=7387): stderr: | �[0;m�[38;5;43m20221210011221782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210011221782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210011221783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210011221783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210011221783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210011221784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210011221784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:12:23.620795 run patchelf(pid=7390): Terminating (SIGINT) 01:12:23.791466 run patchelf(pid=7390): Terminated: ok {rc=0} 01:12:23.822816 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7387): Process ended prematurely: osmo-stp_10.42.42.5(pid=7387) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7387)] [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:12:23.832067 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 01:12:23.892476 run osmo-hlr_10.42.42.2(pid=7384): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7384)] 01:12:23.941426 run osmo-hlr_10.42.42.2(pid=7384): stdout: | (launched: 2022-12-10_01:12:20.643527) 01:12:23.991323 run osmo-hlr_10.42.42.2(pid=7384): stderr: | �[0;m�[1;31m20221210011220823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210011220823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210011220823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210011220824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210011220824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210011220824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210011220836 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210011220845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210011220845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210011220845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:12:24.033727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7377): Terminating (SIGTERM) 01:12:24.073529 run iperf3-srv_10.42.42.10(pid=7378): Terminating (SIGTERM) 01:12:24.113218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7379): Terminating (SIGTERM) 01:12:24.152767 run iperf3-srv_10.42.42.10(pid=7380): Terminating (SIGTERM) 01:12:24.192766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7383): Terminating (SIGTERM) 01:12:24.232477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7386): Terminating (SIGTERM) 01:12:24.272358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7389): Terminating (SIGTERM) 01:12:24.281818 --- ParallelTerminationStrategy: PID 7377 died... 01:12:24.334767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7377): Terminated: ok {rc=0} 01:12:24.344566 --- ParallelTerminationStrategy: PID 7378 died... 01:12:24.397556 run iperf3-srv_10.42.42.10(pid=7378): Terminated {rc=256} 01:12:24.407021 --- ParallelTerminationStrategy: PID 7379 died... 01:12:24.459635 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7379): Terminated: ok {rc=0} 01:12:24.469349 --- ParallelTerminationStrategy: PID 7380 died... 01:12:24.521876 run iperf3-srv_10.42.42.10(pid=7380): Terminated {rc=256} 01:12:24.531534 --- ParallelTerminationStrategy: PID 7383 died... 01:12:24.584266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7383): Terminated: ok {rc=0} 01:12:24.593783 --- ParallelTerminationStrategy: PID 7386 died... 01:12:24.646523 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7386): Terminated: ok {rc=0} 01:12:24.656226 --- ParallelTerminationStrategy: PID 7389 died... 01:12:24.709651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7389): Terminated: ok {rc=0} 01:12:24.798455 bus /gobi_0: Setting Powered False 01:12:25.901721 bus /gobi_0: Setting Powered False 01:12:27.011630 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7387): Process ended prematurely: osmo-stp_10.42.42.5(pid=7387) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7387)]