Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16375): Process ended prematurely: osmo-stp_10.42.42.5(pid=16375) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16375)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:56:41.684874 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:41.696047 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:56:41.842288 tst cs_paging_gprs_active.py: using LAC 25503 02:56:41.971736 tst cs_paging_gprs_active.py: using RAC 3 02:56:42.099331 tst cs_paging_gprs_active.py: using CellId 25503 02:56:42.226570 tst cs_paging_gprs_active.py: using BVCI 25504 02:56:42.251473 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.262743 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.273781 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.284857 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.295838 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.306847 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.318148 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.329088 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:42.340300 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:56:42.457306 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:56:42.750872 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:56:42.886615 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:56:43.223444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16365): Launched 02:56:43.503390 run iperf3-srv_10.42.42.10(pid=16366): Launched 02:56:43.701413 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:56:43.836132 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:56:44.171458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16367): Launched 02:56:44.451067 run iperf3-srv_10.42.42.10(pid=16368): Launched 02:56:44.650269 tst cs_paging_gprs_active.py:38: start network... 02:56:44.785847 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:56:45.305733 run create_hlr_db(pid=16369): Launched 02:56:45.493245 bus /gobi_6: Setting Powered False 02:56:46.510011 run create_hlr_db(pid=16369): Terminated: ok {rc=0} 02:56:46.943707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16371): Launched 02:56:47.270376 run osmo-hlr_10.42.42.2(pid=16372): Launched 02:56:47.388697 run osmo-stp_10.42.42.5: Starting osmo-stp 02:56:47.916302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16374): Launched 02:56:48.220730 run osmo-stp_10.42.42.5(pid=16375): Launched 02:56:48.331627 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:56:48.860216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16377): Launched 02:56:48.968282 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:56:49.233206 run patchelf(pid=16378): Launched 02:56:49.412806 run osmo-stp_10.42.42.5(pid=16375): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16375)] 02:56:49.542443 run osmo-stp_10.42.42.5(pid=16375): stdout: | (launched: 2022-12-10_02:56:48.070757) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:56:49.672478 run osmo-stp_10.42.42.5(pid=16375): stderr: | �[0;m�[38;5;43m20221210025648241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025648242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025648242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025648242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:56:49.799865 run osmo-stp_10.42.42.5(pid=16375): stdout: | (launched: 2022-12-10_02:56:48.070757) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:56:49.925222 run osmo-stp_10.42.42.5(pid=16375): stderr: | �[0;m�[38;5;43m20221210025648241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025648242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025648242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025648242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025648243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:56:50.071150 run patchelf(pid=16378): Terminating (SIGINT) 02:56:50.241895 run patchelf(pid=16378): Terminated: ok {rc=0} 02:56:50.273142 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16375): Process ended prematurely: osmo-stp_10.42.42.5(pid=16375) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16375)] [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:56:50.282271 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 02:56:50.342741 run osmo-hlr_10.42.42.2(pid=16372): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16372)] 02:56:50.391711 run osmo-hlr_10.42.42.2(pid=16372): stdout: | (launched: 2022-12-10_02:56:47.102826) 02:56:50.441318 run osmo-hlr_10.42.42.2(pid=16372): stderr: | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025647295 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025647307 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025647316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025647316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025647316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:56:50.483431 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16365): Terminating (SIGTERM) 02:56:50.523374 run iperf3-srv_10.42.42.10(pid=16366): Terminating (SIGTERM) 02:56:50.562971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16367): Terminating (SIGTERM) 02:56:50.602633 run iperf3-srv_10.42.42.10(pid=16368): Terminating (SIGTERM) 02:56:50.642349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16371): Terminating (SIGTERM) 02:56:50.681932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16374): Terminating (SIGTERM) 02:56:50.721626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16377): Terminating (SIGTERM) 02:56:50.731061 --- ParallelTerminationStrategy: PID 16365 died... 02:56:50.784415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16365): Terminated: ok {rc=0} 02:56:50.794003 --- ParallelTerminationStrategy: PID 16366 died... 02:56:50.846643 run iperf3-srv_10.42.42.10(pid=16366): Terminated {rc=256} 02:56:50.856319 --- ParallelTerminationStrategy: PID 16367 died... 02:56:50.909255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16367): Terminated: ok {rc=0} 02:56:50.918967 --- ParallelTerminationStrategy: PID 16368 died... 02:56:50.971860 run iperf3-srv_10.42.42.10(pid=16368): Terminated {rc=256} 02:56:50.981455 --- ParallelTerminationStrategy: PID 16371 died... 02:56:51.034478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16371): Terminated: ok {rc=0} 02:56:51.044277 --- ParallelTerminationStrategy: PID 16374 died... 02:56:51.097508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16374): Terminated: ok {rc=0} 02:56:51.107085 --- ParallelTerminationStrategy: PID 16377 died... 02:56:51.159945 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16377): Terminated: ok {rc=0} 02:56:51.244135 bus /gobi_0: Setting Powered False 02:56:52.346729 bus /gobi_0: Setting Powered False 02:56:53.458718 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16375): Process ended prematurely: osmo-stp_10.42.42.5(pid=16375) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16375)]