Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=18858): Process ended prematurely: osmo-stp_10.42.42.5(pid=18858) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18858)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 03:19:53.002976 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.014954 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:19:53.159373 tst cs_paging_gprs_active.py: using LAC 25626 03:19:53.285393 tst cs_paging_gprs_active.py: using RAC 126 03:19:53.410852 tst cs_paging_gprs_active.py: using CellId 25626 03:19:53.532543 tst cs_paging_gprs_active.py: using BVCI 25627 03:19:53.555563 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.566995 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.578281 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.589842 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.602170 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.613266 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.624553 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.635737 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:19:53.648148 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:19:53.768548 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:19:54.060802 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:19:54.194686 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:19:54.525702 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18848): Launched 03:19:54.801209 run iperf3-srv_10.42.42.10(pid=18849): Launched 03:19:54.997059 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:19:55.130461 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:19:55.462903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18850): Launched 03:19:55.738375 run iperf3-srv_10.42.42.10(pid=18851): Launched 03:19:55.933690 tst cs_paging_gprs_active.py:38: start network... 03:19:56.067478 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:19:56.584719 run create_hlr_db(pid=18852): Launched 03:19:56.769885 bus /gobi_6: Setting Powered False 03:19:57.791675 run create_hlr_db(pid=18852): Terminated: ok {rc=0} 03:19:58.196766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18854): Launched 03:19:58.499491 run osmo-hlr_10.42.42.2(pid=18855): Launched 03:19:58.615473 run osmo-stp_10.42.42.5: Starting osmo-stp 03:19:59.136642 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18857): Launched 03:19:59.438802 run osmo-stp_10.42.42.5(pid=18858): Launched 03:19:59.551374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:00.076440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18860): Launched 03:20:00.184256 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:00.447616 run patchelf(pid=18861): Launched 03:20:00.624150 run osmo-stp_10.42.42.5(pid=18858): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18858)] 03:20:00.752870 run osmo-stp_10.42.42.5(pid=18858): stdout: | (launched: 2022-12-10_03:19:59.289756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:00.893772 run osmo-stp_10.42.42.5(pid=18858): stderr: | �[0;m�[38;5;43m20221210031959459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031959460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031959460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031959460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:01.027005 run osmo-stp_10.42.42.5(pid=18858): stdout: | (launched: 2022-12-10_03:19:59.289756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:01.154429 run osmo-stp_10.42.42.5(pid=18858): stderr: | �[0;m�[38;5;43m20221210031959459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031959460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031959460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031959460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031959461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:01.312829 run patchelf(pid=18861): Terminating (SIGINT) 03:20:01.517122 run patchelf(pid=18861): Terminated: ok {rc=0} 03:20:01.560935 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18858): Process ended prematurely: osmo-stp_10.42.42.5(pid=18858) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18858)] [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 03:20:01.573348 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 03:20:01.649139 run osmo-hlr_10.42.42.2(pid=18855): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18855)] 03:20:01.710052 run osmo-hlr_10.42.42.2(pid=18855): stdout: | (launched: 2022-12-10_03:19:58.349873) 03:20:01.770666 run osmo-hlr_10.42.42.2(pid=18855): stderr: | �[0;m�[1;31m20221210031958524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031958524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031958524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031958524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031958525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031958525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031958536 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031958544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031958545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031958545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:01.828740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18848): Terminating (SIGTERM) 03:20:01.884773 run iperf3-srv_10.42.42.10(pid=18849): Terminating (SIGTERM) 03:20:01.937762 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18850): Terminating (SIGTERM) 03:20:01.987985 run iperf3-srv_10.42.42.10(pid=18851): Terminating (SIGTERM) 03:20:02.053945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18854): Terminating (SIGTERM) 03:20:02.122536 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18857): Terminating (SIGTERM) 03:20:02.187929 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18860): Terminating (SIGTERM) 03:20:02.202599 --- ParallelTerminationStrategy: PID 18848 died... 03:20:02.275203 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18848): Terminated: ok {rc=0} 03:20:02.285939 --- ParallelTerminationStrategy: PID 18849 died... 03:20:02.345330 run iperf3-srv_10.42.42.10(pid=18849): Terminated {rc=256} 03:20:02.355937 --- ParallelTerminationStrategy: PID 18850 died... 03:20:02.414816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18850): Terminated: ok {rc=0} 03:20:02.426217 --- ParallelTerminationStrategy: PID 18851 died... 03:20:02.484025 run iperf3-srv_10.42.42.10(pid=18851): Terminated {rc=256} 03:20:02.494792 --- ParallelTerminationStrategy: PID 18854 died... 03:20:02.552508 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18854): Terminated: ok {rc=0} 03:20:02.563630 --- ParallelTerminationStrategy: PID 18857 died... 03:20:02.622548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18857): Terminated: ok {rc=0} 03:20:02.632651 --- ParallelTerminationStrategy: PID 18860 died... 03:20:02.688241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18860): Terminated: ok {rc=0} 03:20:02.774732 bus /gobi_0: Setting Powered False 03:20:03.881781 bus /gobi_0: Setting Powered False 03:20:04.989374 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18858): Process ended prematurely: osmo-stp_10.42.42.5(pid=18858) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18858)]