Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22872): Process ended prematurely: osmo-stp_10.42.42.5(pid=22872) [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22872)]
Standard Output
---------------------------------------------- trial-2369 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:50:06.845425 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:06.856723 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:50:07.002528 tst cs_paging_gprs_active.py: using LAC 25785 03:50:07.124561 tst cs_paging_gprs_active.py: using RAC 30 03:50:07.245840 tst cs_paging_gprs_active.py: using CellId 25785 03:50:07.366750 tst cs_paging_gprs_active.py: using BVCI 25786 03:50:07.390841 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.402054 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.412894 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.424079 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.435155 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.446378 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.457627 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.468836 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:07.480336 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:07.594971 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:07.869705 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:50:07.991916 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:08.296483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22861): Launched 03:50:08.549492 run iperf3-srv_10.42.42.10(pid=22863): Launched 03:50:08.729313 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:50:08.851806 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:09.157433 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22864): Launched 03:50:09.409947 run iperf3-srv_10.42.42.10(pid=22865): Launched 03:50:09.588900 tst cs_paging_gprs_active.py:38: start network... 03:50:09.711316 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:50:10.172795 run create_hlr_db(pid=22866): Launched 03:50:10.341851 bus /gobi_6: Setting Powered False 03:50:11.362963 run create_hlr_db(pid=22866): Terminated: ok {rc=0} 03:50:11.779177 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22868): Launched 03:50:12.092645 run osmo-hlr_10.42.42.2(pid=22869): Launched 03:50:12.207566 run osmo-stp_10.42.42.5: Starting osmo-stp 03:50:12.750044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22871): Launched 03:50:13.063050 run osmo-stp_10.42.42.5(pid=22872): Launched 03:50:13.176647 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:50:13.721052 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22874): Launched 03:50:13.833608 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:50:14.106568 run patchelf(pid=22875): Launched 03:50:14.290255 run osmo-stp_10.42.42.5(pid=22872): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22872)] 03:50:14.425343 run osmo-stp_10.42.42.5(pid=22872): stdout: | (launched: 2022-12-10_03:50:12.909297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:14.560218 run osmo-stp_10.42.42.5(pid=22872): stderr: | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035013100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:14.690133 run osmo-stp_10.42.42.5(pid=22872): stdout: | (launched: 2022-12-10_03:50:12.909297) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:14.818699 run osmo-stp_10.42.42.5(pid=22872): stderr: | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035013099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035013100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035013100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:14.968351 run patchelf(pid=22875): Terminating (SIGINT) 03:50:15.145382 run patchelf(pid=22875): Terminated: ok {rc=0} 03:50:15.178139 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22872): Process ended prematurely: osmo-stp_10.42.42.5(pid=22872) [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22872)] [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:50:15.188029 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 03:50:15.250396 run osmo-hlr_10.42.42.2(pid=22869): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22869)] 03:50:15.301198 run osmo-hlr_10.42.42.2(pid=22869): stdout: | (launched: 2022-12-10_03:50:11.938677) 03:50:15.352813 run osmo-hlr_10.42.42.2(pid=22869): stderr: | �[0;m�[1;31m20221210035012135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035012136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035012136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035012136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035012136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035012136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035012149 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035012157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035012157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035012157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:50:15.396841 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22861): Terminating (SIGTERM) 03:50:15.438561 run iperf3-srv_10.42.42.10(pid=22863): Terminating (SIGTERM) 03:50:15.480362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22864): Terminating (SIGTERM) 03:50:15.521873 run iperf3-srv_10.42.42.10(pid=22865): Terminating (SIGTERM) 03:50:15.563788 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22868): Terminating (SIGTERM) 03:50:15.605740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22871): Terminating (SIGTERM) 03:50:15.647484 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22874): Terminating (SIGTERM) 03:50:15.657160 --- ParallelTerminationStrategy: PID 22861 died... 03:50:15.713042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22861): Terminated: ok {rc=0} 03:50:15.723041 --- ParallelTerminationStrategy: PID 22863 died... 03:50:15.778012 run iperf3-srv_10.42.42.10(pid=22863): Terminated {rc=256} 03:50:15.788075 --- ParallelTerminationStrategy: PID 22864 died... 03:50:15.850781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22864): Terminated: ok {rc=0} 03:50:15.867389 --- ParallelTerminationStrategy: PID 22865 died... 03:50:15.923277 run iperf3-srv_10.42.42.10(pid=22865): Terminated {rc=256} 03:50:15.933574 --- ParallelTerminationStrategy: PID 22868 died... 03:50:15.989491 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22868): Terminated: ok {rc=0} 03:50:15.999852 --- ParallelTerminationStrategy: PID 22871 died... 03:50:16.055758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22871): Terminated: ok {rc=0} 03:50:16.066526 --- ParallelTerminationStrategy: PID 22874 died... 03:50:16.121973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22874): Terminated: ok {rc=0} 03:50:16.217693 bus /gobi_0: Setting Powered False 03:50:17.327741 bus /gobi_0: Setting Powered False 03:50:18.432644 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22872): Process ended prematurely: osmo-stp_10.42.42.5(pid=22872) [trial-2369↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22872)]