Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23736): Process ended prematurely: osmo-stp_10.42.42.5(pid=23736) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23736)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:58:39.563320 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:39.574136 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:58:39.732010 tst cs_paging_gprs_active.py: using LAC 25831 03:58:39.855385 tst cs_paging_gprs_active.py: using RAC 76 03:58:39.975790 tst cs_paging_gprs_active.py: using CellId 25831 03:58:40.096015 tst cs_paging_gprs_active.py: using BVCI 25832 03:58:40.119354 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.130175 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.140682 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.151918 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.162761 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.173699 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.184563 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.195439 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:58:40.206784 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:58:40.320173 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:58:40.616117 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:58:40.752824 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:58:41.088342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23726): Launched 03:58:41.367084 run iperf3-srv_10.42.42.10(pid=23727): Launched 03:58:41.566850 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:58:41.702371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:58:42.036851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23728): Launched 03:58:42.314805 run iperf3-srv_10.42.42.10(pid=23729): Launched 03:58:42.514870 tst cs_paging_gprs_active.py:38: start network... 03:58:42.650383 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:58:43.168206 run create_hlr_db(pid=23730): Launched 03:58:43.356846 bus /gobi_6: Setting Powered False 03:58:44.377062 run create_hlr_db(pid=23730): Terminated: ok {rc=0} 03:58:44.784598 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23732): Launched 03:58:45.089167 run osmo-hlr_10.42.42.2(pid=23733): Launched 03:58:45.201507 run osmo-stp_10.42.42.5: Starting osmo-stp 03:58:45.727674 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23735): Launched 03:58:46.065225 run osmo-stp_10.42.42.5(pid=23736): Launched 03:58:46.227789 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:58:46.890376 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23738): Launched 03:58:47.011547 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:58:47.318181 run patchelf(pid=23739): Launched 03:58:47.511933 run osmo-stp_10.42.42.5(pid=23736): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23736)] 03:58:47.651697 run osmo-stp_10.42.42.5(pid=23736): stdout: | (launched: 2022-12-10_03:58:45.899941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:47.791290 run osmo-stp_10.42.42.5(pid=23736): stderr: | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035846272 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:47.926204 run osmo-stp_10.42.42.5(pid=23736): stdout: | (launched: 2022-12-10_03:58:45.899941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:58:48.059637 run osmo-stp_10.42.42.5(pid=23736): stderr: | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035846271 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035846272 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035846272 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:58:48.215366 run patchelf(pid=23739): Terminating (SIGINT) 03:58:48.397993 run patchelf(pid=23739): Terminated: ok {rc=0} 03:58:48.431666 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23736): Process ended prematurely: osmo-stp_10.42.42.5(pid=23736) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23736)] [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:58:48.442048 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 03:58:48.506153 run osmo-hlr_10.42.42.2(pid=23733): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23733)] 03:58:48.558198 run osmo-hlr_10.42.42.2(pid=23733): stdout: | (launched: 2022-12-10_03:58:44.939320) 03:58:48.610581 run osmo-hlr_10.42.42.2(pid=23733): stderr: | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035845114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035845126 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035845135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035845135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035845135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:58:48.655332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23726): Terminating (SIGTERM) 03:58:48.697440 run iperf3-srv_10.42.42.10(pid=23727): Terminating (SIGTERM) 03:58:48.739555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23728): Terminating (SIGTERM) 03:58:48.781163 run iperf3-srv_10.42.42.10(pid=23729): Terminating (SIGTERM) 03:58:48.823535 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23732): Terminating (SIGTERM) 03:58:48.865543 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23735): Terminating (SIGTERM) 03:58:48.907022 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23738): Terminating (SIGTERM) 03:58:48.916750 --- ParallelTerminationStrategy: PID 23726 died... 03:58:48.972804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23726): Terminated: ok {rc=0} 03:58:48.983485 --- ParallelTerminationStrategy: PID 23727 died... 03:58:49.039103 run iperf3-srv_10.42.42.10(pid=23727): Terminated {rc=256} 03:58:49.049945 --- ParallelTerminationStrategy: PID 23728 died... 03:58:49.105904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23728): Terminated: ok {rc=0} 03:58:49.116420 --- ParallelTerminationStrategy: PID 23729 died... 03:58:49.172531 run iperf3-srv_10.42.42.10(pid=23729): Terminated {rc=256} 03:58:49.182635 --- ParallelTerminationStrategy: PID 23732 died... 03:58:49.238192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23732): Terminated: ok {rc=0} 03:58:49.248708 --- ParallelTerminationStrategy: PID 23735 died... 03:58:49.304753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23735): Terminated: ok {rc=0} 03:58:49.315046 --- ParallelTerminationStrategy: PID 23738 died... 03:58:49.370827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23738): Terminated: ok {rc=0} 03:58:49.457709 bus /gobi_0: Setting Powered False 03:58:50.559476 bus /gobi_0: Setting Powered False 03:58:51.669344 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23736): Process ended prematurely: osmo-stp_10.42.42.5(pid=23736) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23736)]