Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=23601): Process ended prematurely: osmo-stp_10.42.42.5(pid=23601) [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23601)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 03:56:40.319492 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.330580 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 03:56:40.475441 tst cs_paging_gprs_active.py: using LAC 25821 03:56:40.600042 tst cs_paging_gprs_active.py: using RAC 66 03:56:40.724855 tst cs_paging_gprs_active.py: using CellId 25821 03:56:40.849728 tst cs_paging_gprs_active.py: using BVCI 25822 03:56:40.874436 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.885451 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.896251 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.907124 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.917857 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.928464 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.939417 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.950204 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:56:40.961118 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:56:41.077783 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:56:41.362555 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:56:41.490670 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:56:41.806079 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23591): Launched 03:56:42.068003 run iperf3-srv_10.42.42.10(pid=23592): Launched 03:56:42.254537 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:56:42.381614 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:56:42.696473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23593): Launched 03:56:42.957894 run iperf3-srv_10.42.42.10(pid=23594): Launched 03:56:43.143938 tst cs_paging_gprs_active.py:38: start network... 03:56:43.270932 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:56:43.756073 run create_hlr_db(pid=23595): Launched 03:56:43.931510 bus /sierra_2: Setting Powered False 03:56:44.953505 run create_hlr_db(pid=23595): Terminated: ok {rc=0} 03:56:45.384273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23597): Launched 03:56:45.709811 run osmo-hlr_10.42.42.2(pid=23598): Launched 03:56:45.838294 run osmo-stp_10.42.42.5: Starting osmo-stp 03:56:46.491752 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23600): Launched 03:56:46.853420 run osmo-stp_10.42.42.5(pid=23601): Launched 03:56:47.011968 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:56:47.658535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23603): Launched 03:56:47.774514 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:56:48.058090 run patchelf(pid=23604): Launched 03:56:48.248613 run osmo-stp_10.42.42.5(pid=23601): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23601)] 03:56:48.387953 run osmo-stp_10.42.42.5(pid=23601): stdout: | (launched: 2022-12-10_03:56:46.659674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:56:48.527113 run osmo-stp_10.42.42.5(pid=23601): stderr: | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035647012 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:56:48.661396 run osmo-stp_10.42.42.5(pid=23601): stdout: | (launched: 2022-12-10_03:56:46.659674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:56:48.794156 run osmo-stp_10.42.42.5(pid=23601): stderr: | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035647011 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035647012 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035647012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:56:48.949221 run patchelf(pid=23604): Terminating (SIGINT) 03:56:49.130785 run patchelf(pid=23604): Terminated: ok {rc=0} 03:56:49.164193 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23601): Process ended prematurely: osmo-stp_10.42.42.5(pid=23601) [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23601)] [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 03:56:49.174469 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 03:56:49.236907 run osmo-hlr_10.42.42.2(pid=23598): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23598)] 03:56:49.287933 run osmo-hlr_10.42.42.2(pid=23598): stdout: | (launched: 2022-12-10_03:56:45.550202) 03:56:49.339453 run osmo-hlr_10.42.42.2(pid=23598): stderr: | �[0;m�[1;31m20221210035645751 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035645752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035645752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035645752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035645752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035645752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035645764 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035645773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035645773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035645773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:56:49.383573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23591): Terminating (SIGTERM) 03:56:49.425075 run iperf3-srv_10.42.42.10(pid=23592): Terminating (SIGTERM) 03:56:49.466494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23593): Terminating (SIGTERM) 03:56:49.507667 run iperf3-srv_10.42.42.10(pid=23594): Terminating (SIGTERM) 03:56:49.549186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23597): Terminating (SIGTERM) 03:56:49.590850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23600): Terminating (SIGTERM) 03:56:49.632544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23603): Terminating (SIGTERM) 03:56:49.642202 --- ParallelTerminationStrategy: PID 23591 died... 03:56:49.698081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23591): Terminated: ok {rc=0} 03:56:49.708030 --- ParallelTerminationStrategy: PID 23592 died... 03:56:49.763076 run iperf3-srv_10.42.42.10(pid=23592): Terminated {rc=256} 03:56:49.773015 --- ParallelTerminationStrategy: PID 23593 died... 03:56:49.827929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23593): Terminated: ok {rc=0} 03:56:49.837909 --- ParallelTerminationStrategy: PID 23594 died... 03:56:49.892677 run iperf3-srv_10.42.42.10(pid=23594): Terminated {rc=256} 03:56:49.902572 --- ParallelTerminationStrategy: PID 23597 died... 03:56:49.957749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23597): Terminated: ok {rc=0} 03:56:49.967677 --- ParallelTerminationStrategy: PID 23600 died... 03:56:50.023261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23600): Terminated: ok {rc=0} 03:56:50.033338 --- ParallelTerminationStrategy: PID 23603 died... 03:56:50.088718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23603): Terminated: ok {rc=0} 03:56:50.174627 bus /gobi_0: Setting Powered False 03:56:51.281675 bus /gobi_0: Setting Powered False 03:56:52.389374 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23601): Process ended prematurely: osmo-stp_10.42.42.5(pid=23601) [trial-2369↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23601)]