Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24704): Process ended prematurely: osmo-stp_10.42.42.5(pid=24704) [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24704)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:08:28.335972 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.348232 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:08:28.509703 tst cs_paging_gprs_active.py: using LAC 25883 04:08:28.630414 tst cs_paging_gprs_active.py: using RAC 128 04:08:28.749477 tst cs_paging_gprs_active.py: using CellId 25883 04:08:28.870543 tst cs_paging_gprs_active.py: using BVCI 25884 04:08:28.894254 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.906354 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.919162 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.932144 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.945248 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.957159 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.970266 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.984003 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:08:28.997114 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:08:29.115280 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:08:29.396500 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:08:29.528380 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:08:29.867267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24694): Launched 04:08:30.147542 run iperf3-srv_10.42.42.10(pid=24695): Launched 04:08:30.334358 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:08:30.461752 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:08:30.795379 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24696): Launched 04:08:31.172861 run iperf3-srv_10.42.42.10(pid=24697): Launched 04:08:31.369255 tst cs_paging_gprs_active.py:38: start network... 04:08:31.503327 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:08:32.088630 run create_hlr_db(pid=24698): Launched 04:08:32.273787 bus /gobi_6: Setting Powered False 04:08:33.288386 run create_hlr_db(pid=24698): Terminated: ok {rc=0} 04:08:33.723485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24700): Launched 04:08:34.131968 run osmo-hlr_10.42.42.2(pid=24701): Launched 04:08:34.365261 run osmo-stp_10.42.42.5: Starting osmo-stp 04:08:35.009129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24703): Launched 04:08:35.418211 run osmo-stp_10.42.42.5(pid=24704): Launched 04:08:35.645642 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:08:36.259879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24706): Launched 04:08:36.369620 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:08:36.659824 run patchelf(pid=24707): Launched 04:08:36.840911 run osmo-stp_10.42.42.5(pid=24704): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24704)] 04:08:36.973453 run osmo-stp_10.42.42.5(pid=24704): stdout: | (launched: 2022-12-10_04:08:35.163785) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:08:37.106059 run osmo-stp_10.42.42.5(pid=24704): stderr: | �[0;m�[38;5;43m20221210040835489 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210040835489 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210040835490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210040835490 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210040835490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210040835491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210040835491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:08:37.234127 run osmo-stp_10.42.42.5(pid=24704): stdout: | (launched: 2022-12-10_04:08:35.163785) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:08:37.359734 run osmo-stp_10.42.42.5(pid=24704): stderr: | �[0;m�[38;5;43m20221210040835489 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210040835489 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210040835490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210040835490 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210040835490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210040835491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210040835491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:08:37.508429 run patchelf(pid=24707): Terminating (SIGINT) 04:08:37.683166 run patchelf(pid=24707): Terminated: ok {rc=0} 04:08:37.715566 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24704): Process ended prematurely: osmo-stp_10.42.42.5(pid=24704) [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24704)] [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:08:37.726068 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 04:08:37.792374 run osmo-hlr_10.42.42.2(pid=24701): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24701)] 04:08:37.845695 run osmo-hlr_10.42.42.2(pid=24701): stdout: | (launched: 2022-12-10_04:08:33.880094) 04:08:37.898296 run osmo-hlr_10.42.42.2(pid=24701): stderr: | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210040834227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210040834247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210040834265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210040834265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210040834265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:08:37.941967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24694): Terminating (SIGTERM) 04:08:37.987281 run iperf3-srv_10.42.42.10(pid=24695): Terminating (SIGTERM) 04:08:38.031675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24696): Terminating (SIGTERM) 04:08:38.075573 run iperf3-srv_10.42.42.10(pid=24697): Terminating (SIGTERM) 04:08:38.119798 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24700): Terminating (SIGTERM) 04:08:38.164629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24703): Terminating (SIGTERM) 04:08:38.206604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24706): Terminating (SIGTERM) 04:08:38.219993 --- ParallelTerminationStrategy: PID 24694 died... 04:08:38.278941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24694): Terminated: ok {rc=0} 04:08:38.289422 --- ParallelTerminationStrategy: PID 24695 died... 04:08:38.345879 run iperf3-srv_10.42.42.10(pid=24695): Terminated {rc=256} 04:08:38.356192 --- ParallelTerminationStrategy: PID 24696 died... 04:08:38.414036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24696): Terminated: ok {rc=0} 04:08:38.424370 --- ParallelTerminationStrategy: PID 24697 died... 04:08:38.480863 run iperf3-srv_10.42.42.10(pid=24697): Terminated {rc=256} 04:08:38.491370 --- ParallelTerminationStrategy: PID 24700 died... 04:08:38.547962 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24700): Terminated: ok {rc=0} 04:08:38.558604 --- ParallelTerminationStrategy: PID 24703 died... 04:08:38.615951 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24703): Terminated: ok {rc=0} 04:08:38.626465 --- ParallelTerminationStrategy: PID 24706 died... 04:08:38.683321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24706): Terminated: ok {rc=0} 04:08:38.770607 bus /gobi_0: Setting Powered False 04:08:39.877236 bus /gobi_0: Setting Powered False 04:08:40.981799 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24704): Process ended prematurely: osmo-stp_10.42.42.5(pid=24704) [trial-2369↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24704)]